bing tracking image
  1. Roof Rack
  2. Rhino Rack
  3. Tracks
  4. 2 Pack
  5. 63 Inch Track Length
Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2

Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2

Item # RTC16
Retail:$176.59
Our Price: $132.70
You Save: $43.89
Roof Rack
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks. Great Prices for the best roof rack from Rhino Rack. Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 part number RTC16 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (112)
  • Q & A (0)
  • Photos

Rhino Rack Roof Rack - RTC16

  • Tracks
  • Rhino Rack
  • 2 Pack
  • 63 Inch Track Length

These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks.


Features:

  • Create strong, low-profile attachment points for Rhino-Rack RLTP, RLTF or RLT500 track-mounted legs (sold separately)
  • Allow you to easily move legs and crossbars to a new position to accommodate different-size loads
  • Mount directly to your vehicle with a naked roof - also work for camper shells and hard tonneaus
    • Tracks mount to your roof with T-bolts - drilling required
      • No holes in the tracks - T-bolts slide into the bottom C-channels of the tracks for installation
      • Included O-rings seal bolt holes in roof to prevent leakage into your vehicle
  • Have notches built into the ends of the tracks so that you can easily remove roof-rack legs and crossbars
  • Constructed of extruded aluminum with anti-corrosion coating
  • Include 4 end caps that provide finished look for the tracks


Specs:

  • Quantity: 2 tracks
  • Track dimensions: 2" wide x 1/2" tall x 63" long
  • 5-Year limited warranty


RTC16 Rhino Rack Channel Mount RTC Tracks - 63" Long - Qty 2

Installation Details RTC16 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 - RTC16

Average Customer Rating:  4.5 out of 5 stars   (112 Customer Reviews)

These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks.

by:

I wanted to use my Rhino-Rack bars and accessories, although I did not want a bed cover on my new RAM 2500. So I mounted these Roof Rack Tracks directly to the bed rails. They fit perfectly, I only had to separate the nyloc nuts from the plastic knobs which did not fit under the rail.

Joseph

11/3/2022

I subsequently installed a truck cap, and moved the Roof Rack Tracks to side rails on a utility trailer, to use my Rhino Rack kayak crossbars on the trailer. Works great!



by:

Purchased RTC tracks to install on new truck cap, previously had Yakima tracks on old truck. Rhino track system is definitely superior to, more user friendly and cheaper then yakima. A bonus, I was also able to reuse my yakima rail riders with the Rhino track rails. Product arrive quickly and in good condition.
Reason I did not give 4 stars was etrailer sent 2 left rails, at first they were very understanding and were going to send out correct rail. Then they said no, just flip one rail around, despite directions saying to face both slots to rear. Long story short contacted Rhino Racks, they agreed to send me out correct rails.



by:

Overall pleased with the product. The rails were solid and I was able to shorten them for my application. My only complaint is the rubber gaskets could be a little easier to apply as mine were somewhat melted in the box. Installation was not difficult assuming you can measure and take your time. I mounted some Yakima landing pads on them with Yakima feet and bars.



by:

Added the 63" track to my bed rails. Fairly easy installation but required some different hardware based on the application. Some areas didn't allow enough room for the knob so used washers instead with the nyloc nut from the knob. Beware the overall length is roughly 5 inches longer with the end caps (~68"). I had to cut about an inch from the rail to fit between my bull rings but knew there would be a chance of modification needed for the intended use. etrailer has great information and fast shipping.



by:

Superb customer service start to finish.



by:

Excellent service. I have ordered many items and found etrailer always dependable, prompt, courteous.



by:

My previous truck topper had Yakima tracks. I kept my racks so needed new tracks on my new truck. At this time yakima and Thule tracks were all sold out so I went with this brand as they are compatible with Thule or Yakima parts.
At first glance I thought they'd be more difficult to mount but it turned out they are actually easier to mount and seem really solid.
Plus these can be mounted by 1 person as the bolts holding it on are t bolts slide into the track so no need for 2 people to install like the yakima trucks.



by:

I recently ordered two products The quality of both items were great. The bed mat fit perfect and the roof rails were just what I had expected.

Bobby

1/27/2020

The roof rack is great. It was easy to install and extremely durable

Bobby

1/27/2020

The roof rack is great. It was easy to install and extremely durable



by:

I was very happy with these bars at first. But over this past year it seems the adhesive stripping on the bottom will slide off causing the tracks to become uneven. Concerns were raised with the manufacturer but they were not helpful or kind, Would not replace stripping or track.



by:

great product. Easy to install and fit perfectly on my 2017 Ridgeline while still allowing the use of a Paragon Tonneau



by:

Received tracks and hardware but no end caps.

Etrailer Expert

Jenny N.

5/31/2022

I will have our Customer Service team reach out to you.



by:

After one year of owning this rack I can say that it is top quality and even through all the loading and unloading and brought terrain it has never come loose. Great product and even better customer service from etrailer.com.



by:

Intuitive assembly, seemless look in my truck bed. Looks like factory installed



by:

Perfect rail for my 6’ camper shell!



by:

Well made and durable product



by: 09/29/2021

Worked out great! I would buy these ag ain!



by:

Bill

3/21/2022

Great



by:

After a year, still looks brand new.



by:

Delivered on time and what I expected.



by:

Very happy with the product



by:

Exceptional service and follow up. Top notch!!



by:



by:



by:



by:


25
96
Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack

  • Which Channel Nuts Should Be Used With The Rhino-Rack RTC Style Roof Rack Tracks?
    For your Rhino-Rack RTC-Style Roof Rack Tracks # RTC16, you will want to use the supplied 4 M10 channel nuts: -Replacement M10 Channel Nut for Rhino-Rack Accessories # RR89TB.
    view full answer...
  • Would Thule Tracker Fit Kits Fit in Rhino Rack Track RTC15
    Although it's never been tested yes, the Thule Tracker Fit Kits would fit in the track part # RTC16 as the Thule also uses track nuts that are 3/4 inches wide like the Yakima towers.
    view full answer...
  • How To Mount Rhino Rack Heavy Duty Cross Bars On A 2002 VW Eurovan
    There is not a compatible foot to mount the Rhino Rack heavy duty bars to your 2002 VW Eurovan. Since it is a naked roof you would have to mount a channel mount Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 Item # RTC16 to the roof and use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 4 Item # RLTP-2 to mount your heavy duty bars. Installing the tracks do require drilling holes into the roof for the hardware.
    view full answer...
  • Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
    It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
    view full answer...
  • Will the Rhino Rack Tracks Work with Yakima Control Towers and What Is the Length of Mounting Bolts
    The 63 inch Rhino Rack RTC Style Roof Rack Tracks, # RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went to our warehouse and pulled a set of the RT Style Rhino Roof Tracks and the Yakima Landing Pad1, #Y00221 to perform a test fit to ensure compatibility. All parts performed just as they should so yes, the Rhino Rack RTC Style Tracks will work...
    view full answer...
    Image 1 for
  • Recommended Roof Rack Replacement System for a 2014 Toyota FJ Cruiser
    It looks like the picture came through, Jessica. From what I can see, it looks like the issue is with the OEM rails, which we aren't going to be able to fix. No matter which set of crossbars you choose, you're still going to have a pretty tall setup because the OEM rails are pretty tall. What you could do, is use a track system # RTC16 which would require you to remove your OEM bars. From here you'd need to add the landing pad # Y00221, towers # Y53TR, and bars # Y00425. This would...
    view full answer...
  • Does the Rhino-Rack Aero Bar Roof Rack for Camper Shells Come with 70"+ Crossbars
    The Rhino-Rack Aero Bar Roof Rack for Camper Shells have a max crossbar length of 59", part # Y02-490B when purchased as a kit. That said, you can make your own kit like the above using any crossbar length you want. I have attached parts for you below. Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600 Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2 Please note, the bottom of the crossbars are slotted so you'll need...
    view full answer...
  • Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
    The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
    view full answer...
  • Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
    Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
    view full answer...
  • Parts Needed to Adapt Yakima Crossbars to a Rhino Rack 63 inch Rail System
    Though manufacturers tend to recommend against using another company's towers on their track, there are occasional fits for cross-brand uses. In this case, you'll be able to use the Yakima LaunchPad 1, part # Y00221, in the Rhino Rack 63 inch rail, part # RTC16. I've included a picture of the two working in perfect harmony with each other. These pads include caps for when the rails are not in use to protect the inner workings of the LaunchPads. From there, you'll just need a set of...
    view full answer...
    Image 1 for
  • Rhino Roof Rack and Thule Canoe Carrier for Leer 180 Truck Shell
    I have a great solution for a Rhino Roof rack on your new Leer 180 shell and an attachment for hauling a canoe. I recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells item # Y02-480B. They have a weight capacity of 220 lbs, track length of 63" per side, and the cross bar dimensions are 54" long x 3-1/2" wide x 1-1/2" tall with a leg height of 3". The two RTC-style tracks with dual C-channels provide adjustable mounting points for your roof-rack legs. The tracks mount to your Leer...
    view full answer...
    Image 1 for
  • Parts Needed To Install The Rhino-Rack Sunseeker Awning On A Rhino-Rack RTC Roof Rack Track
    I spoke with Rhino-Rack and their tech stated they only recommend installing the Rhino-Rack Sunseeker Awning # RR32132 into a crossbar and have not tested it in the c-channel of the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 # RTC16 as they are slightly larger than their crossbar c-channels. For this I recommend the Track Mount RLTP Legs # RLTP-2 and the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 # RRVA180B-2. The # RLTP-2 legs...
    view full answer...
  • Will Rhino-Rack RTC Tracks Fit 2017 Ram 3500
    Thank you for all of the information! Yes, you can use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 on the roof of your 2017 Ram 3500. I do recommend using a sealer like the Loctite # LT37467 to help make sure the holes you'll be drilling are properly sealed. The Rhino-Rack HD crossbars are great for heavy loads and such but the T-Channel they offer is a bit larger than the standard crossbar system. So much so that the Rhino-Rack products have to use a specialized adapter to fit...
    view full answer...
  • No-Drill Roof Rack Recommendation for 2018 Chevrolet Silverado 1500 Quad Cab
    We have roof racks like the Yakima CoreBar rack part numbers # Y00422, # Y28TR, and # Y06122 which are a confirmed fit for your 2018 Chevy Silverado 1500 quad cab and do not require drilling into the roof at all. This rack actually clamps around the top of the door frame and does not require any permanent modification.
    view full answer...
  • Can Rhino-Rack RTC-Style Roof Rack Tracks Install at an Angle?
    The Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 do need to lay flat. There cannot be an angle because that would cause an undue amount of stress on your camper shell, the tracks, and the legs. To safely and effectively use the rack you are going to need to do it so the tracks are laid down flat or they could very easily snap off or come apart because they'll be constantly flexed.
    view full answer...
  • Parts Needed for 71 inch Long Rhino Rack HD Roof Rack for Camper Shell
    If you wanted a similar Rhino Rack Camper Shell roof rack to the part # Y01-140B that has 71 inch long crossbars you'd need to piece the kit together with the part # RB1800B-2 for the crossbars, # RTC16 for the tracks on the roof, and then # RRRLT600 for the legs and you'd be set.
    view full answer...
  • Color of Rhino Rack Roof Rack Tracks
    The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are black in color. These are 63" long tracks which measure 2" wide x 1/2" tall.
    view full answer...
  • Are There Rails Available For Installing a Roof Rack on a Vehicle
    We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
    view full answer...
  • Rhino-Rack Track for 2018 Ford F-150 Camper Shell
    We have exactly what you're needing, Clayton! The Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B that fits your 2018 Ford F-150 can be broken down into the following parts: - 54" Vortex Crossbars # RRVA137B-2 - Quick Mount Legs # RRRLT600 - RTC-Style Roof Rack Tracks # RTC16 Since you already have the crossbars you will just need the Quick Mount Legs and RTC-Style Roof Rack Tracks to get this roof rack on your camper shell.
    view full answer...
  • Does the Rhino-Rack Aero Bar Roof Rack for Camper Shells Come With Longer Bars
    In order to get the Rhino-Rack Aero Bar Roof Rack for Camper Shells with longer bars you'll need to purchase all the kit components separately but I have listed them for you below. Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600 Rhino-Rack Vortex Aero Crossbars part # RRVA165B-2 (65") or part # RRVA180B-2 (71") Please note, the channels under the crossbars that the feet mount in are only 11.8" long on each end...
    view full answer...
  • 2015 Jeep Wrangler Roof Rack with Rhino Rack Vortex RLT600 for Rhino-Rack 2 Kayak Carrier
    The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 are designed to fit the tracks like # RTC16. Another popular option is to use the backbone roof mounting system for Jeep Wrangler hard tops # RRRJKB2 and rubber bases # RRQMFK06. Then you will simply use crossbars like the 59 inch # RRVA150B-2 to complete the roof rack. This complete system will allow you to use most roof accessories like the 2 Kayak Carrier # S512 and RRS512X....
    view full answer...
  • Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
    The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
    view full answer...
  • Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper Shell
    With the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
    view full answer...
  • Can I Put Longer Crossbars On My Rhino Rack For Camper Shells
    Rhino Rack has tracks and 65" to 70" aero bars, but not together in combination. That means you would have to order the parts separately. However, there are a couple of things you need to be aware of if you want to carry boats that wide. The first thing is that the mounting channel, on the underside of the Vortex Aerobars, does not extend the entire length of the crossbar. It only extends 11-1/2" per side. This means your crossbars cannot extend more than 11-1/2" beyond the Rhino-Rack legs,...
    view full answer...


< Previous



Do you have a question about this Roof Rack?


Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee DeAnne T
Updated by:
DeAnne T
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Updated by:
Daron K
Employee Alex H
Updated by:
Alex H
Employee Isabelle B
Updated by:
Isabelle B
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video by:
Chris R
Employee Ethan H
Video by:
Ethan H
Employee Aidan B
Installed by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.