Summer Starts Here - Save up to 70%
Secure this TV mount to the wall in your RV and swivel it up to 15 degrees toward the couch for movie night. Perfect for a smaller living room or bedroom, the slim, wall-hugging design of this TV mount won't take up a lot of space.
Features:
Specs:
Easy to Adjust the TV Angle
When you get to the campsite after dark and want to unwind with a good movie, you can easily swivel the mount 15 degrees in either direction for the perfect view from your couch or recliner - no more craning your neck or missing the best part.
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff Hello, everybody, this is Jeff at etrailer.com. Today we can take a look at this MORryde swivel TV wall mount, how this wall-mounted bracket will securely hold your RV's medium size flat panel TV to your wall. Maximum load capacity this bracket'll hold is 50 pounds. And you can see the TV mount, once your TV's mounted, will allow your TV to swivel 15 degrees so that you can find the best viewing angle. Now it includes the wall mount bracket, the swivel TV mount and the installation hardware for mounting the wall mount bracket, and for mounting the TV to the TV bracket. It is a nice compact design, it does save space.
Basically what you'll do is take your wall mount bracket, this part right here, and this will mount to your wall, and, again, it comes with the hardware. Once that's mounted to the wall, what you do is then you can mount this, your TV, to this TV mount and it will accept three different VESA compliant mounting patterns, and the included hardware as you need it are included. Basically it'll accept a 75 millimeter by 75 millimeter VESA pattern, a hundred millimeter by a hundred millimeter pattern, and a 200 millimeter by 200 millimeter pattern on your TV. Once you line that up, use the correct hardware, mount the TV to this. Once this is mounted and then this is installed onto your wall, all you have to do is take your TV drop it over the top of this.
Once it's over the top, slide it right down into place. And then the holes will mount up. You take your bolts and just go ahead and screw those in. And screw them in all the way on one side, tighten it down. And then on the other side you'll do the same.
Line the screw up with the hole and then go ahead and snug that down. Use a Phillips screwdriver to snug it on both sides and then just like that, it'll hold it to your wall. And then again, there's your swivel of 15 degrees to get the correct viewing angle. These parts are made in the USA. A few specs on this.
I wanna give you the dimensions. We'll go ahead and take it off the wall mount again. 'Cause I can give you the wall mounts dimensions and then the separate TV mount dimensions. When it's all together like this, the overall dimensions, you're going to be right at eight and 7/8 inches wide, total height, 11 inches tall. And your total depth front to back is right at four inches deep. Now, if I go ahead and take it off I'll give you the dimensions of the TV mounting plate separately and the wall mount separately. Take our screws out. And then what you'll do is just lift it up off your wall bracket and take it off. So on your wall mount, the height on that is gonna be right at 11 inches. The width on just the wall mount bracket is two and a quarter inches. Total depth is about one inch. And then on your TV mount, that's basically gonna be eight and 7/8 inches by eight and 7/8 inches. But that should do it for the review on the MORryde swivel TV wall mount..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.