Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
RV bathroom faucet has an angled base that prevents you from hitting your knuckles on the wall when turning the knobs. The aerator can be easily removed for maintenance, and the internal seal helps prevent the faucet from dripping and wasting water.
Features:
Specs:
This faucet has an angled base that tilts the knobs forward, preventing you from hitting your knuckles on the wall when you're turning the faucet on and off. This makes the faucet ideal for small or cramped RV bathrooms.
To install, use the inlet shanks to drop the new faucet and deck plate in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a four inch dual knob RV bathroom faucet. This replaces or upgrades the faucet in your RV's bathroom. The dual smoke colored knobs make it easy to control your hot and cold water flow. The unit is made from a durable plastic construction with an ivory finish to give it a really nice look and it features a complete lead-free design.It does have this low-flow aerator. This is threaded, so it can easily be removed. This is great for if you need to clean it out or if you want to allow more water to come through the faucet.
And it does come with an internal seal, which ensures leak-proof performance.This faucet features a non-rotating valve stem tip that eliminates washer wear. This is a feature that also prevents potential leaking in that area. Your hot and cold water line connection points are separated on center by four inches and they measure around two inches long. The base of the unit measures two and a quarter by about six and a quarter. I did take a measurement from the very back of the unit to the very front of the unit, as if it we're installed and got a measurement of around six and one quarter inches.I do want to point out that once installed, you'll notice how these handles or these knobs are angled forward.
This is great for compact bathrooms that have a wall directly behind the faucet. So that way, you can operate the knobs without hitting your fingers or your knuckles into the wall directly behind it. So the angled design simply makes the handles sit at an angle, making them more accessible.The product is also made in the USA.That's going to do it for today's look at the four inch dual knob RV bathroom faucet.
Average Customer Rating: 4.7 out of 5 stars (574 Customer Reviews)
RV bathroom faucet has an angled base that prevents you from hitting your knuckles on the wall when turning the knobs. The aerator can be easily removed for maintenance, and the internal seal helps prevent the faucet from dripping and wasting water.Works perfectly
I think the quality of this new bath faucet seems to be good however I wish the color more closely matched the sink. The old faucet was white but the sink was off white. I picked this color but it is really more beige then my "beige" sink but I'm going to live with it.
Service and follow up is always good with etrailer.
Easy to install fit like a glove
Very good product
Works better than the original
Works well, looks good, and had a good feel
Works and fits great
Very happy looks great can't we to inst ale
We'd been looking for months for a replacement faucet for our year 2000 camper. After logging off all of my devices (to hopefully circumvent 'relevance'), I ran my search again and etrailer was one of the top results. Because the photos and video were precise, clear, taken from all angles and with detailed measurements, I was able to compare with my old faucet. I was so pleased that it was an exact fit!! I'll be using them again soon. We're still rehabbing this little camper and etrailer is now my go to spot for replacement parts.
Website was easy to use. For me the best part was the measurements of the faucets. It took the guess work out of knowing what would fit and match what we wanted. Installation went well. Love the look of it and it even gives us higher water pressure than our old one which was a nice surprise. Overall, I would definitely order from them again.
I bought this because the faucet in our RV was very low and I wanted a faucet that had a higher outlet. It doesn’t go out very far into the sink, so, when washing your hands, water drips onto the counter top. I removed it and went back to the original faucet. I have since the found a swivel attachment that makes the water flow out further into the sink. I put this faucet back with the swivel and all should be fine.
Trailer folks are just great! I chose a shipping method that wasn't an option for my address, and they called me right away to get it figured out. That's right, called me person to person. That is some awesome customer service right there! Oh yeah, the part was a perfect match too, took longer for the Teflon goop to dry than to install the fixture itself
It was an amazing product exact fit no cutting or pre-measuring, the best part is the new shower valve works exceptional,
Ps..
Please don't laugh...
Perfect replacement for the plain white fixture that came on the camper. 30 minute removal and install.
Once I install it I'm sure it will be just fine. The threaded shower part was broken off and I need to remove the access panel to get to the hook up for the faucet. Tom
These faucets should be standard installs in new RVs like my Ibex.It reaches farther above and into the sink bowl so less splash. The valve handles turn much better and install was as simple as it gets. Should have changed sooner.
And the best is Made in USA!!
It's the exact replacement on a 2017 Keystone Springdale. Fairly easy replacement. Most difficult part is the small amount of room for access to the two water feed lines. But very possible with patience. Also Be prepared to replace the seals at the inlet water lines with new ones. It would be good on the etrailer web site for this faucet to have the seals listed to add to your order.
There are two strainer screens within the faucet at the water inlet lines. Keep those screens in mind because they are prone to fouling up and obstructing water flow. When that happens you have to remove the whole faucet again to clean them.
Anyway the faucet is the perfect replacement and works great
The faucet looked nice but it didn't fit on top of the new sink I ordered as well as the 1/2" stems were too short so I had to send it back. I did attempt to attach it to see if it did fit but between the thickness of the new sink and my counter top no way would it work.
This LaSalle Bristol RV Shower valve replaced original OEM part perfectly. Works great!
The one I received and installed today suffers from the same problem that others have encountered with this particular model: the hot water side has an issue that restricts the flow of water to the center pull-down spout. The cold water flow is just fine, and having reconnected the original faucet being replaced, both the hot and cold water flow just fine, and there is no issue with the hot water pressure. Unfortunately I will be returning this unit and asking for a refund.
It works very well as hoped upon initial installation. Being all plastic is OK given the affordable cost. Long term durability remains to be seen. Good for my needs.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tim
10/22/2022
Great