Solera RV Slide-Out Awning - 97" Wide - Black
(1125 reviews)
Price: $468.81
In Stock
Solera RV Slide-Out Awning - 97" Wide - Black
Item # LCV000168107
Retail:$768.77
Our Price: $468.81
You Save: $299.96
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1125)
- Q & A (0)
- Photos
Lippert RV Awnings - LCV000168107
- Slide-Out Awnings
- 92 Inch Wide
- 93 Inch Wide
- 94 Inch Wide
- 95 Inch Wide
- 96 Inch Wide
- 97 Inch Wide
- Black
- Lippert
- Extends 48 Inches
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 8'1" from edge to edge. Includes all necessary components.
Features:
- Protects your RV slide-out from damage from clogging leaves, debris, and pooling water
- Prevents water damage and mildew
- Blocks out sun to help keep the RV cool
- Extends and retracts with your slide-out automatically
- Made of heavy-duty, durable fabric with premium 13.5-oz vinyl
- Won't crack in cold temperatures
- Prevents leaks with heat-welded seams
- Includes brackets, hardware, and awning rail
- Black awning fabric matches black hardware
- Made in the USA
Specs:
- Application: slide-outs 92" - 97" wide with 48" extension
- Minimum 7" of clearance needed on both sides of the slide-out - order next size down if needed
- 2 Slide-outs next to each other need 14" total clearance between them
- Awning dimensions:
- Awning rail: 97" long
- Awning fabric (when fully extended): 97" wide x 48" long
- Bolt hole diameter: 3/16"
- Mounting bracket dimensions: see below
- 1-Year warranty
How to Measure for an RV Slide-Out Awning
To ensure you get the correct size awning for your slide-out, measure from outer edge to outer edge of the trim. You will need 7" of clearance on both sides of the slide-out for the awning. If you don't have 7" clearance on both sides, go down to the next size; this will still give your slide-out plenty of coverage.
If there are two slide-outs next to each other, you will need a total of 14" of clearance between them for them both to have a slide-out awning. Again, you can go down a size if you are low on space.
Protect Your RV Slide-Out
Without a slide-topper, the roof of your slide-out room is continually exposed and can accumulate leaves and bugs and different types of debris. That debris can build up along the rubber strip at the top of your box, preventing a firm seal when your slide-out is retracted. Rain water can then get in and pool on the top of your slide-out. If you don't clear the water off each time it rains, mold can begin to form. And when your slide-out is pulled in, that mold gets inside your RV.
The Solera RV slide-out awning alleviates those problems by serving as a protective covering over the top of your RV's slide-out. Not only does it prevent debris from collecting on the roof of your slide-out, but it keeps water from pooling and potentially causing damage down the road. Because it mounts directly to the front of the slide box, the slide-out awning is able to automatically extend and retract every time the slide-out room is extended or retracted.
Durable Vinyl Fabric
The durable awning fabric holds up to the rigors of the outdoors. It's made of premium 13.5-oz vinyl, which is an upgrade over the 10-oz fabric used in many awnings. This fabric also features heat-welded seams to prevent leaks. And it is made to withstand cold temperatures down to -25 degrees Fahrenheit, so it won't crack or degrade during the winter.
Simple Installation
Use the self-tapping screws to secure the included access plate to the side of your slide-out, positioning the plate at the bottom of the T-molding. The two access brackets slide easily onto the access plate's track. The rods that are located at each end of the roller tube, which comes with the awning fabric already mounted, slide through the hole in the two access brackets.
The included awning rail is used to anchor the other side of the fabric to your RV. This rail can be mounted up to 5" above the trim on top of your slide box.
Note: It's important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.
V000168107 Lippert Solera 8'1" Slider (Slide-Topper) in Black w/ Black Hardware
Installation Details
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Customer Reviews
Solera RV Slide-Out Awning - 97" Wide - Black - LCV000168107
Average Customer Rating: 4.6 out of 5 stars (1125 Customer Reviews)
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 8'1" from edge to edge. Includes all necessary components.by: Michael05/05/2024
Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.
by: GR07/10/2023
I am not sure whose fault it was, but it took about 3 months for my order to be completed. It was backordered initially, which is fine, but somehow shipped two weeks early. I get ready to install and realize the awning rail, and half of the screws are missing. It appeared to be an open box item, or maybe items taken, and sent to another customer. Customer service was great, (through the whole process, keeping me informed) and they requested the missing parts, which were also back ordered. Two months later, the parts become available and they ship me another slide topper, with the awning rail, but missing all of the screws again!!!! This required another order to be placed for the screws, which took almost two weeks to arrive. I then needed to return the extra awning with the freight company, which was aggravating because they kept canceling/rescheduling dates. Finally got it all installed which took about an hour. The slide topper looks great now that it’s finally installed!
by: John 06/30/2023
Our slide-topper awning installation directions were clear and except for one step, is a one man job. Strongly advise you read thru instructions completely before beginning, and I found a "dry-run" assembly very helpful. Very pleased with the topper.
by: Eliud01/20/2021
Great product. Looks great on my 2021 Passport GT Series by Keystone. Easy to install when you watch the installation video.
by: Brad01/01/2020
Was delivered on time. Easy to install, still looks and works like brand new.
by: Tom09/29/2023
Worked out great, easy install and no problems after 1 year
by: Brad09/08/2020
I had some parts missing from my order that I received on Wednesday night as we were getting ready for Hurricane Laura here in East Texas. I noticed that the cardboard tube had one of the metal end caps missing and was taped up, my first thought was uh-oh. Long story short I called e-trailer and talked to a nice lady named Paula Thursday morning by Tuesday I had the parts I had to have. To me that’s pretty good customer service. Thanks e-trailer, and a big thanks to Paula S.
Brad
9/9/2021
It still looks good and works like it’s supposed to, I’m pleased with the awning, it was easy to install, done it by my self. But most of all I was very pleased with y’all’s costumer service!!
by: Samuel 08/16/2023
Fit as if installed at the factory.
by: Andres 07/16/2023
It took me about 2 hours to install was not that hard to do need someone to help to put canvas on the track other than that not hard to do
by: Jim06/27/2019
We bought this slide topper to keep the debris off the top of our slide since we don't have a ladder on our trailer I can't easily sweep off the slide roof. We recently camped under a blooming tree that dropped a ton of flower debris during a rainstorm. The topper kept the slide roof clean so we were able to close up without risk of getting debris in the slide seals. Since it was wet, some of the debris rolled up in the topper and fell out when we opened it up at home to dry it out (would probably not have done that if it were dry). At home it was easy to clean out as I have plenty of ladders. This has certainly solved out problem of keeping the slide roof clear while we are camping. The awning appears to be very well constructed. I found it pretty easy to install with basic tools. So far we are very pleased.
by: Gray09/26/2019
The Solera Slide Topper was fairly easy for me to install with the help of one person. I did watch the installation video several times, which helps. It has worked good for me without any problems. I would recommend this Solera Slide Topper. Only thing I need to tighten up the fabric on one side, because it is loose on one side but is tight on the other side.
by: Richard 01/17/2023
Driver was good on communication with me on the delivery. Appreciate the good service
by: Michael07/05/2018
We are very happy with the Solera 8.5' Slider (Slide-Topper) in Black w/ Black Hardware
Item # LCV000168107
It is installed on our 2015 XLR Forest River slide out with no difficulties following the shipping instructions and a youtube 13.5 video making me very comfortable to do it. As you directed the 8.5 ft was a perfect fit for our 94 inch wide box. There is 4.5 inches per side of overhang to actually inner section of slide out... Lovely. Thank you
by: Michael07/05/2018
We are very happy with the Solera 8.5' Slider (Slide-Topper) in Black w/ Black Hardware
Item # LCV000168107
It is installed on our 2015 XLR Forest River slide out with no difficulties following the shipping instructions and a youtube 13.5 video making me very comfortable to do it. As you directed the 8.5 ft was a perfect fit for our 94 inch wide box. There is 4.5 inches per side of overhang to actually inner section of slide out... Lovely. Thank you
by: Ron N01/28/2022
One of the best additions we’ve made to our 5th wheel. I’m glad we got these slide covers. A little bit of an effort to install, but any one mechanical inclined will have no problem.
I’m happy with them.
by: Christopher07/09/2021
The slide toppers are a great addition to my fifth wheel slides. The links provided by etrailer, made the installation fast and easy.
Thank you William, for all your help,
by: Alan12/08/2020
We received our first awning which was obviously damaged as the packages end was crushed. It was sent back immediately by the trucking company and within 1 week we had another awning in perfect condition. etrailer was very easy to deal with. I watched an etrailer online video which made it very easy for me to install the awning. It took my brother and I, 2 hours to install. Thanks etrailer for your great service.
by: Danny 10/05/2022
Always top notch customer service and quality parts. If I have issues they are resolved.
by: Lloyd03/04/2018
This topper was not only easy to install but, in my opinion, is of excellent quality as is etrailer.
by: Mark 04/05/2020
Quick deliver, Great product, Easy inst all....
Mark
4/5/2021
Still very satisfied with topper. No problems so far and holding up very well.
by: Gregory07/09/2022
Good quality, easy installment, worth the money
by: John 05/03/2024
by: Dustin06/17/2022
by: Jim 08/24/2023
by: Stephen 10/25/2023
25
962
Show More Reviews
See what our Experts say about this Lippert RV Awnings
- Which Slide Out Topper Awning for a Slide Out 93 Inches WideFor a 93" wide slide out the appropriate parts you're looking for are either the Solera RV Slide-Out Awning - 8'1" Wide - 48" Projection # LCV000168107 (black) or # LCV000163289 (white)-these are the ones with a 97" wide awning rail. These awnings will have a bit of overhang on each side to provide plenty of protection from water and debris accumulating on the top of your slide out. I've linked a review video of this part for you to check out.
view full answer... - Can I Get a Slide Out Topper If I Don't Have the Proper Clearance Past the Slide Out FlangesWith the lack of clearance your options are more limited but you can still get a slide topper for your slide out. You will just have to realize you may not have full coverage of the slide out. You can down size to a smaller slide out topper that allows you to have the clearance necessary. Just measure the size of your slide out from flange to flange and see how close that puts you to the 7" of clearance. Then you will just go down in slide out size until you have the 7" of clearance needed....
view full answer...
- Troubleshooting A Solera Slide Out Awning That's Touching The Corner Of The Flange The reason why the extension rod of your Solera RV Slide-Out Awning # LCV000168107 is touching the corner flange piece is either because you have too large of an awning installed or the awning isn't centered on the slide out. If the tension isn't properly split between the two rods then it will pull too much on one side and start touching the flange. Too large of an awning places the extension rods too far out in the mounting brackets and they start to bend. If I could see some pictures...
view full answer... - Slide-Topper for a 2018 Cruiser RV Fun Finder Xtreme Lite Travel TrailerYes, the Solera 8.5' Slider (Slide-Topper) part # LCV000168107 is correct for your 2018 Cruiser RV Fun Finder Xtreme Lite Travel Trailer with a 96" flange to flange measurement. This slide-topper comes in black and the awning rail is included. This will be the best option for you. It is made in the U.S.A. and comes with a one year warranty.
view full answer... - Which Slide-Out Awning for Trailer With 97-3/4" MeasurementThe Solera RV Slide-Out Awning - 97" Wide # LCV000168107 is the one you want. You will still have full coverage on the top with the 8'1" fabric. This is the black version but it also comes in white # LCV000163289.
view full answer... - Solera Slide Topper for Slide Outs that Measure 5 ft, 7 ft, and 8 ftFor the 5 foot slide out you'd want the part # LC23FR, for the 7 foot one # LCV000165062, and then for the 8 foot one # LCV000168107 and you'd be set!
view full answer... - Recommended Solera RV Slide-Out Awning for 93-3/4" SlideI recommend the Solera RV Slide-Out Awning, # LCV000168107 for black or, the # LCV000163289 for white.
view full answer... - Solera Slide Toppers Available Sizes and How To Measure On a Jayco Eagle Travel TrailerTo find the toppers for your Jayco Eagle HT 2835RSTS you will need to measure your 3 slide outs. The measurement will be from outside flange to outside flange. If you don't have at least 7" of clearance on both sides of your slide-out box, order the next size down. I can help you determine the correct size if you can send me the measurements of each of your slides along with images so I can help determine if any awnings or other items might be in the way. Solera RV Slide-Out Awning 57"...
view full answer... - Is Awning Cord Rail Included with the Solera 8.5' Slider (Slide-Topper)Yes, the cord (or awning) rail is included with the Solera 8.5' Slider (Slide-Topper) # LCV000168107 as well as any other Slide-Toppers from Lippert that we sell.
view full answer... - Recommended Slide Out Awning Compatibility With 90 Inch Slide OutThe Solera 8' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000168106 is for sliders with a width between 86 inches to 91-3/4 inches measuring from flange to flange. The width of this awning is 96 inches and that width beyond the slider is needed for the hardware. This awning extends up to 50 inches. If your measurement of 90 inches didn't include the flange to flange, you may need to go with the larger awning for the box width of 92 to 97-3/4 inches in the # LCV000168107....
view full answer... - Correct Solera RV Slide-Out Awning for Trailer with 96 Inch and 145 Inch Slide OutsThe correct Solera RV Slide-Out Awning for a slide out that measures 96" from the outside of each flange is part # LCV000168107 for black or part # LCV000163289 for white. The correct Solera RV Slide-Out Awning for a slide out that measures 145-1/2" from the outside of each flange is part # LCV000177334 for black or part # LCV000163298 for white.
view full answer... - Recommended Slide-Out Awning For A 2012 Heartland RV Edge Travel Trailer Yes, you would want some overhang to prevent any leaves or debris from getting onto the roof of your slide-out, but you'll also want to ensure you have at least 5"-7" of clearance on each side to allow for the arms of the awning to fully close without coming into contact with anything. Since you have a 102.5" flange to flange measurement you'll want the Solera RV Slide-Out Awning # LCV000168108 or # LCV000163290 for white. This awning fits flange measurements from 98"-103" so it will...
view full answer... - Correct Black Slide-Out Awning for 91-1/2" Wide Slide-OutIf the flange to flange distance on your slide-out is 91-1/2" wide then you'll need to go with the Solera RV Slide-Out Awning # LCV000168107 which uses 97" wide fabric. Keep in mind you need 7" of clearance on both side of the slide-out so if that is going to be an issue then you need to go with the next size down which is part # LCV000168106.
view full answer...
- Slide Out Awning for 2001 Monaco DynastySince your slide out is 92 inches long the correct slide topper you'd need is the part # LCV000168107 which comes with everything needed to install it even a rail. The price is available at the attached product link.
view full answer... - Slide Topper Recommendation for Slide Outs that Measure 82-1/2 and 95-1/4 inchesThanks for getting me the flange width dimensions of your slide outs as that's exactly what we need to pick out the correct Solera slide toppers. For the slide out flange width that measures 95-1/4 inches you'd need the part # LCV000168107 and then for the slide out that measures 82-1/2 inches you'd want the # LCV000165062 and you'd be set. Both of these kits come with everything you'll need to install them as well.
view full answer... - Slide-Out Awnings For 76 Inch, 85 Inch, and 94 Inch Flange to Flange MeasurementWe can get you set up with slide-out awnings, and I appreciate those measurements. Here is what you need, and you can choose from either White or Black in color: - 76" Measurement: Solera RV Slide-Out Awning - White # LCV000163285 or Black # LCV000168105 - 85" Measurement: Solera RV Slide-Out Awning - White # LCV000163287 or Black # LCV000165062 - 94" Measurement: Solera RV Slide-Out Awning - White # LCV000163289 or Black # LCV000168107
view full answer... - Correct Solera Slide Topper for an 8' Wide Slider (Including Flanges)Since your slider measures 8' (96") including the flanges you actually need the 8.5' Solera Slide Topper # LCV000168107. This measures 102" wide and has a box width range of 92" - 97-3/4" so it is perfect for your application. The part that I mentioned above is Black but if you would like a White Slide Topper you need part # LCV000163289 instead.
view full answer... - Slide Topper that Fits 2019 Mini Lite 2506SThe flange to flange dimension is what's needed to pick out a slide topper for an RV like what you have. So based on your dimension of 94-1/4 inch you'd need a topper like part # LCV000168107 and you'd be set.
view full answer... - Correct Slide Toppers For 2021 Jayco Eagle 336FBOKFor slide toppers you will need to make sure that you have at least 2-1/2 inches of overhang on each side of the slide out. So using the measurements you provided for your bedroom slide out you will need the Solera RV Slide-Out Awning - 8'1" Wide - 48" Projection - Black # LCV000168107. For the kitchen you need the Solera RV Slide-Out Awning - 13'7" Wide - 48" Projection - Black # LCV000168110. For the living room you will need the Solera RV Slide-Out Awning - 12'7" Wide - 48" Projection...
view full answer... - Solera RV Slide-Out Awning Recommendations and MeasurementsFor determining the proper size Solera Slider you need, to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the left/right side overhang). You can have greater than 2-1/2" overhang if you want, but it is suggested that you do not go any less. Since you have done so with resulting measurement of 162.25" you need an awning no less than 167.25. You can go beyond the overhang of 2.5" each side if you choose, no worries....
view full answer... - Slide Awning for 97" Wide Slide on Keystone Springdale TrailerSince your slide is 97" wide we will want the Lippert # LCV000163289 Slide -Out Awning in White for slides measuring 92-97" wide. Order # LCV000168107 for Black. All the hardware you need is included. However, you will need some TRC # 362BT-18x1-50 butyl tape during the install. I have attached a video demonstration of the install.
view full answer... - Lippert Slide-Out Awning For 2020 Keystone Carbon 348 108 Flange With 3.75 Clearance To AwningFor your 2020 Keystone Carbon 348 I recommend installing the Solera RV Slide-Out Awning # LCV000168108. This entire assembly is 108" wide which will fit just inside your 108-3/4" flange to flange measurement. The fabric on the topper itself is 5" narrower at 103" due to the hardware so your fabric will still cover your entire box. The 3-3/4" clearance to the awning is sufficient for each side. If you went with the Solera RV Slide-Out Awning # LCV000168107 it is only 102" wide overall...
view full answer... - Which Slide Out Awnings for Slide Outs That Measure 56 Inch Wide and 111 Inch Wide Flange to FlangeTypically you want your slide out topper to extend a minimum of 2-1/2" outside each flange. So, for a 4'-8" wide slide out you'll want to use the Solera Slide Topper- 5' Wide- 48" Projection # LC23FR, which is only available in black. Then for the 9'-3" wide slide out, you'll want to use the Solera RV Slide-Out Awning - 9'7" Wide - 48" Projection - Black # LCV000251461 These would be the correct size slide out awnings for the slide outs that you've mentioned based off of the measurements...
view full answer... - Solera RV Slide-Out Awning on 2021 Forest River Salem with 89 Wide Slide-OutFor determining the proper size Solera Slider you need, to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the left/right side overhang). You can have greater than 2-1/2" overhang if you want, but it is suggested that you do not go any less. Since you have done so with resulting measurement of 89" you need an awning no less than 94"; you can go beyond the overhang of 2.5" each side if you choose, no worries. Just...
view full answer...
Do you have a question about this RV Awning?
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Rick G
Updated by:
Chelsea B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Michael B
Updated by:
Isabelle B
Updated by:
Carrie F
Updated by:
Amanda K
Installed by:
Randy B
Written by:
Kristen H
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Jacob H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brad
1/2/2021
After a year, still works and looks new. No issues so far, clean the top when extended once and awhile. Set it and forget it.