B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
(3615 reviews)
Price: $599.00
In Stock
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Item # BWGNRK1016
Our Price: $599.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3615)
- Q & A (0)
- Photos
B and W Gooseneck Hitch - BWGNRK1016
- B and W
- Below the Bed
- 30000 lbs GTW
- Removable Ball - Stores in Hitch
- Wheel Well Release
- 7500 lbs TW
- Manual Ball Removal
- 2-5/16 Hitch Ball
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
- Heavy-duty underbed hitch lets you tow your gooseneck trailer
- Complete truck bed access when you're not towing
- Remove ball from hitch, flip it upside down, and drop it back into hitch for storage
- 5/8" Thick, spring-loaded, steel locking pin on end of handle goes all the way through ball to secure it in place
- Access handle at rear driver's-side wheel well
- Single-piece, machined ball socket provides rugged durability
- Square ball base prevents ball from turning in hitch during hookup
- "Corners only" fit of stowed ball prevents grime buildup inside of hitch
- Specially designed accessories (sold separately) make it easy to customize the hitch to fit your needs
- Tow a 5th-wheel trailer with the B&W Companion hitch adapter
- Spring-loaded safety-chain hookups are built in
- Simple installation with included custom mounting kit
- No welding required
- Truck bed does not have to be removed
- 4" Diameter hole must be cut into bed
- Powder coated steel is sturdy and corrosion resistant
- Made in the USA
Specs:
- Gross towing weight: 30,000 lbs
- Vertical load limit: 7,500 lbs
- Ball size: 2-5/16"
- Limited lifetime warranty
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
Easy-to-Remove, Simple-to-Store Hitch Ball
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W Turnoverball Gooseneck Hitch Accessories
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer.
GNRC912 B and W Turn Over Ball Under-Bed Gooseneck Trailer Hitch - 30,000 lbs
GNRM1016 B and W Turn Over Ball Custom Gooseneck Installation Kit
Installation Details
This Product Fits The Following Vehicles
- 2016 - 2019 GMC Sierra 2500 6-1/2 Foot Bed without OEM Prep Pkg
- 2016 - 2019 GMC Sierra 2500 8 Foot Bed without OEM Prep Pkg
- 2016 - 2019 GMC Sierra 3500 6-1/2 Foot Bed without OEM Prep Pkg
- 2016 - 2019 GMC Sierra 3500 8 Foot Bed without OEM Prep Pkg
- 2016 - 2019 Chevrolet Silverado 2500 6-1/2 Foot Bed without OEM Prep Pkg
- 2016 - 2019 Chevrolet Silverado 2500 8 Foot Bed without OEM Prep Pkg
- 2016 - 2019 Chevrolet Silverado 3500 6-1/2 Foot Bed without OEM Prep Pkg
- 2016 - 2019 Chevrolet Silverado 3500 8 Foot Bed without OEM Prep Pkg
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs - BWGNRK1016
Average Customer Rating: 4.8 out of 5 stars (3615 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.by: Garrett03/17/2024
2019 Chevrolet Silverado 2500
Pretty decent hitch and fairly easy to install!
by: Larry 02/18/2023
Very nice and well built product, the instructions made sense and were very logical. nice to have made in the USA things available. Would highly recommend!
by: Mike01/25/2024
2018 Chevrolet Silverado 3500
Just a great hitch. Solid and easy to install. 10,000 miles of flawless towing.
by: Charles11/28/2023
2018 Chevrolet Silverado 2500
This thing is awesome! Installation is as easy as it says it is. Fit perfect. Looks great. Works great
by: Erik 03/23/2024
Install went easy, hitch works great. Only issue was the measurement to drill hole in bed of truck bed was off by ½".
by: Dean S.09/11/2016
2016 Chevrolet Silverado 3500
I installed this yesterday, along with the Companion 5th Wheel Hitch. Very good instructions, well written, great illustrations. Everything fit perfectly, no struggles with alignment. Very good hardware. Looks to be very sturdily built, the welds looks great.
One thing to look out for - on my 2016 Chev 3500 anyway, the exhaust is in the way of drilling the passenger side retractable chain hook holes. You will need an angle drill or drill with a flexible extension cable. Or get your steel rule out and do some serious measuring like I did and drill the holes from the top down. I drilled the accessible driver's side, then transposed those measurements to the passenger side and drilled from the top using a small drill. After hitting the hole, I used progressively larger drills until I found the edge of the 1/2" hole in the center plate, then hogged out the hole the rest of the way with a Dremel grinder. Not a big deal, just had to get a little creative.
Over all, excellent experience, from the purchase, the help from customer service (fantastic people!), fast delivery and easy install.
Highly recommended!
Dean S.
9/11/2017
Works fantastic! Used quite a bit for work and play. No problems!
by: Mark 10/04/2023
This is the second B&W Gooseneck hitch that I've owned. The original hitch that I owned was on my last truck and I never had an issue in 18 years of use. Installation is straightforward and etrailer's installation videos are very helpful. I don't think that you can buy a better hitch.
by: William07/20/2022
Very heavy duty product had a little difficulty getting some holes lined up but when it went together it was solid. Missing a couple 1/2 inch flat washers in the package but had some on hand so worked out ok. It’s heavy but that’s part of being a good safe hitch. Thanks etrailer and B&W
William
7/21/2023
Great, couldn’t be happier
by: John 04/11/2023
Wonderful hitch.
John
4/11/2024
No Complaints
by: Peter 02/26/2024
Awesome service with the correct parts recommended. Thank you.
by: Jeremy01/02/2022
2017 Chevrolet Silverado 3500
The installation videos are pretty accurate all around. Admittedly, this took me a little longer than the projected time frame, which I anticipated. Removing the driver side wheel well insert also made torquing the bolts there easier. Installation would likely be easier with a buddy, and reaching the torque specifications on several bolts was difficult with a standard 1/2 inch drive torque wrench, but it was all possible and fit 100% perfectly. Excellent conversion for my 3500 8foot bed. Next step is to get the matching fifth wheel hitch and purchase our dream RV.
by: Angry Johnny09/13/2018
2018 Chevrolet Silverado 2500
I installed this hitch on a 2018 Chevy HD 2500 WT Duramax model. I'll first start off that etrailer is awesome to deal with.
Instructions were correct with no issues. B & W makes a nice product and it is heavy duty.
Having installed one of these hitches before, I already knew what to look for, so that made my life a bit easier. The other thing that made my life easier was installing it on a new truck (700 miles) haha.
So, I will give a little tip to installers of this hitch. There is a cross bar that is threaded, that the center section bolts to(The rear crossbar). There is 6 pre-tapped holes. DO yourself a favor and run a tap through those holes first. B & W does not cover the holes before they powder coat the part, so inserting the bolts would be a real pain. Also, measure twice (or more) for the bed hole, you don't want to screw that up. Take the measurement from the edge of the bed where the tailgate is, NOT from the front of the bed. Other than that, everything else was good and the fit was perfect.
Sorry, I don't have more pics, but I didn't think, I would be doing a review, plus I was trying to get it done.
Took about 4 hours to install, including running the wiring harness kit (separate) for the gooseneck trailer.
As for my nickname (Angry Johnny) I only cursed once....lol
by: Mike07/26/2019
2019 GMC Sierra 2500
Looks to be made heavy duty I installed it at home in my garage fairly straight forward to do having never installed one haven’t had a chance to use it as I’m waiting on a trailer to be made
Note on install I did this laying on the floor I do recommend removing the rear tailpipe hanger and pulling down on the tailpipe to get extra room to slide the canter plate over the exhaust pipe also remove the composite shield on the spare and the spare tire I wasn’t in a hurry I took my time. Cutting the 4” hole I bought a new Milwaukee hole saw the teeth chipped and broke I don’t recommend it I have a 6’6” bed so the hole I cut was 44.75” plus 1/8th for the spray in liner DON’T use the factory dimple as you can see the instructions put my center just in front of the factory mark but it is centered
by: Clint H03/21/2017
2016 GMC Sierra 2500
I watched the video you guys had posted for my exact vehicle and that made the installation so much easier. Not that directions are hard to follow, but seeing it done live is the way to go. I'm one that likes to do things myself unless it's super cheap for an install, in this case everyone I talked to quoted around $350 to $450. My buddy and I did the install this past weekend and it turned out great. I hooked up to my gooseneck last night and im happy to say this hitch is awesome! Can't wait to show the wife how a gooseneck trailer rides so much better than a bumper pull, I'm trying to convince her to upgrade from a travel trailer to a fifth wheel, I think this will convince her.
by: Lonnie06/03/2021
I normally don’t write reviews
But this gentlemen Rodger with etrailer made ordering my B&W under bed turnover ball hitch kit fast and easy.
From the date it shipped to the day I received it.
I was very impressed with good efficient professional service.
You have a great team. Thank you.
by: Chad 05/06/2024
Great to deal with and got the parts fast, very impressed.
by: William10/28/2019
2017 GMC Sierra 3500
Loved the quick shipping. Only had a few days to get this and it arrived with 1 day to spare. Had it installed at the dealer's, took a couple of hours. Hauled a heavy trailer over 400 miles with no problems. Worked great.
William W.
10/29/2020
Had this hitch installed on a 2019 GMC Sierra Denali. I was very satisfied with both the hitch and the shipping. Just traded the Denali for a 2020 Chevy 3500 Dually last week which came with the gooseneck package so no longer have the hitch.
by: Bill 03/30/2024
Was easy to install and works great
by: Cody 02/02/2024
2016 Chevrolet Silverado 3500
It was not quite as easy to install as they make it look but wasn't bad. Haven't gotten to pull with it yet but it's solid and doesn't look like I'll have any issues
by: Shannon 10/05/2022
Hitch has give no problems and was easy to install.
The only issue is when loaded heavy taking off and stopping there is a significant “pop” when the load shifts. I assume is need of lubricant on the ball where it sits in the receiver
Katrina B.
1/26/2023
Oh, we do not want to be hearing popping noises while hauling heavy trailers. Yes, you can apply grease on all 4 corners of the ball. You will also need to verify that the bolts on the gooseneck are tight and torqued to spec on the frame. You can check out some of the installation instructions for the specs. If the bolts are all tight and the grease does not help, you can contact the manufacturer for further troubleshooting. I will send you their information and a copy of the instructions in an email.
by: Joe03/29/2022
The purchase went very well. I told Kyle what I wanted and he quickly determined the right model to fit my truck. I then bought a newer truck while out of state as my Shipment arrived at my house. Kyle sent me return labels and sent the new model to my house. It was easy. I’ll use etrailer again.
Joe D.
3/30/2023
Okay except the handle latch doesn’t hook easily to hold the pin out while turning over the ball.
by: David 02/21/2024
2019 GMC Sierra 2500
B&W makes great product always a perfect fit
by: Craig 01/07/2024
2019 Chevrolet Silverado 2500
It was pretty easy to install, it came with really good directions. I’m very happy with the product.
by: Jeffrey 12/21/2023
Great service.
by: Don 10/08/2022
2018 Chevrolet Silverado 2500
Exceptional quality product with great finish. All parts fit perfectly. The video showing the installation of the hitch was extremely helpful. I would HIGHLY recommend a buyer cut a hole in a board as the video suggests and use the board to guide the hole saw as it will jump around otherwise. The one suggestion I would make is for the manufacturer to provide a template for the four holes needed for the safety chain hooks. I could only reach one hole from underneath the truck, and that wasn’t easy. It would also be nice to have a car lift. My car lift has an airplane wing stored on it so I couldn’t use it. I did back the truck onto two ramps that raised it about 10 inches which was very helpful. All in all a reasonable do-it-yourself project - even for a 77 year old!
25
3591
Show More Reviews
See what our Experts say about this B and W Gooseneck Hitch
- Can Demco Recon Gooseneck Adapter be Used with GMC Sierra 3500 with B and W GooseneckYes the Demco Recon Gooseneck to 5th Wheel Adapter part # DM8550045 would work with your 2016 GMC Sierra 3500 that has a B and W Turnoverball gooseneck part # BWGNRK1016 and has the capacity needed to tow your 2016 Jayco Pinnacle 37MDQS.
view full answer... - Comparing B&W Companion 5th Wheel Hitches RVK3000 and RVK3500The B&W Companion RVK3000 was an early model that has a max weight rating of 18,000 lbs, adjustable height ranging from 14-3/4" - 16-3/4", and used U-Bolts for the installation. The B&W Companion # BWRVK3500 was upgraded so that the weight rating is now 20,000 lbs, has a higher adjustable height range of 16-1/4" - 18-1/4" (which is more common), and has a single point for mounting which makes it easier to use. It wasn't that the older systems were bad, B&W just saw where they could make...
view full answer... - What 5th Wheel Hitch Is Needed For B&W Turnoverball Gooseneck Trailer Hitch On 2018 Chevy 2500If your 2018 Chevrolet Silverado 2500 already has the B&W Turnoverball Gooseneck Trailer Hitch, # BWGNRK1016 installed and you want to add a slide type 5th wheel hitch, the 20K B&W Companion 5th Wheel Trailer Hitch w/ Slider, # BWRVK3400-5W is the correct item. No modifications are required to your truck or trailer. And no additional parts are required for the system to work.
view full answer... - Correct B&W Gooseneck Hitch for B&W Companion on a 2018 Chevy Silverado 3500Both the B&W Gooseneck hitches # BWGNRK1016 and # BWGNRK1016-5W are actually the same thing for your 2018 Chevy Silverado 3500. The reason that one has the "5W" added at the end is because we had to put it in with the "5th wheel" fit guide which includes the Companion Slider # BWRVK3400-5W that you referenced. Attached is an installation video of the gooseneck hitch being installed on a similar 2018 Silverado 3500 as well as a photo to show what the end result looks like. If you don't...
view full answer...
- Best Underbed Fifth Wheel Hitch Recommendation for 2019 Chevy Silverado Short BedSince your Montana 3400RL has an extended pin box and a tapered nose designed for short bed clearance you could get away with using a fixed hitch instead of a slider and still have the clearance needed to make tight turns. So for an under bed hitch setup for your 2019 Chevy Silverado short bed I'd recommend the B and W Companion hitch part # BWRVK3500 which is what most consider to be the best fifth wheel hitch available. It's made in the USA, very reliable and well-built, very easy to...
view full answer...
- Rail Kit Needed to Install B and W Companion Hitch in bed of 2017 Chevy Silverado 2500Your best option will be to swap out the Curt gooseneck hitch to the correct B and W hitch for your truck the part # BWGNRK1016 which will allow you to use the Companion hitch you have now like part # BWRVK3500. This will enable you to use basically the best fifth wheel hitch on the market so while it might be a hassle to uninstall the hitch you have now and reinstall the Turnoverball it will be worth it. I attached an install video for this kit for you to check out as well.
view full answer... - Will Installing B&W Underbed Gooseneck Trailer HItch Increase Capacity on 2018 GMC Sierra DenaliI'm not sure which 2018 GMC Sierra Denali you have, as in 1500, 2500 or 3500. I recommend you consult your owner's manual to find the towing capacity for your specific truck. It sounds to me like this is what the dealer was referencing. Even though the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1016 has a gross towing weight of 30,000 lbs you will be limited by the overall towing capacity of your vehicle. If you find that this is higher than 13,500...
view full answer... - B&W Turnover Ball Gooseneck Hitch for my 2017 Gmc Sierra 3500 Without Prep Package.For your 2017 GMC Sierra 3500 non prep package model you will need the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs part # BWGNRK1016 as a complete kit. The Gooseneck center section are different ones on the 2002 model they used the 962 center section and on the 2017 they used the 912 center section. If you need in bed wiring, use the 5th Wheel/Gooseneck Wiring Harness # A10-7007. This will eliminate the need for you to drape the trailer...
view full answer... - Determining if 2017 Chevy Silverado 2500 Has OEM Rail Kit for B and W Gooseneck Hitch InstallIf you look in the bed of your truck right now and only see a completely empty truck bed without any holes or pucks then you do not have the OEM rail kit so the correct Turnoverball would be the # BWGNRK1016. Most likely this is the case as you'd most likely have noticed the ball hole if it was there. If instead you did have the OEM rail kit you'd just need the ball part # BWGNXA2061 and you'd be set.
view full answer... - Can I Use Penetrating Oil on a B&W Turnoverball with a Stuck Latch HandleIn most cases B&W doesn't recommend using any type of lubricant on the spring and latch on your Turnoverball # BWGNRK1016 as it will only attract dirt and moisture on that spring; however in this case you can use some penetrating oil on the ball and the latch to try to loosen everything up. My contact over at B&W mentioned that typically full engagement, if done periodically, would be enough to knock off most of the rust that would be forming. As I mentioned, you can use some penetrating...
view full answer... - 5th Wheel Hitch Compatible With B&W Underbed Gooseneck On 2017 Chevy Silverado 3500Since you already have the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1016 installed in your 2017 Chevy 3500, you will want the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs # BWRVK3500 for your 5th wheel trailer hitch. These parts are designed to work seamlessly.
view full answer... - Does 2019 GMC Sierra 3500 Denali Come with Factory Rails for 5th Wheel HitchGreat question! You can actually purchase the 2019 GMC Sierra 3500 Denali with a factory puck package (that sits flush with your truck bed) or there are aftermarket options for using a 5th wheel hitch as well (which are offered with rails above or below the bed). If you decide to go aftermarket then I do recommend getting rails that sit below the bed because then when you aren't towing your 5th wheel hitch you have full access to your truck bed. Just for reference, B&W offers 5th wheel...
view full answer...
- Easy to Install and Adjustable Height Fifth Wheel Hitch for 2019 Chevy Silverado 2500 Long BedThe USA made B and W Companion fifth wheel hitch setup is the best solution for what you are wanting from a fifth wheel hitch for your 2019 Chevy Silverado 2500 long bed without factory rail kit. For that you'd want the part # BWRVK3500 which is height adjustable from 16-1/4 inch to 18-1/4 inch in height and easily installs in the B and W Turnoverball gooseneck hitch part # BWGNRK1016. This hitch installs easily into the gooseneck ball opening that the Turnoverball has allowing you also...
view full answer... - Can I Use the B&W Companion Hitch From My 1999 Ford F-350 in My 2016 Chevrolet Silverado 2500You can use your existing B&W Companion Fifth Wheel Hitch # BWRVK3500 out of your 1999 Ford F-350 on your 2016 Chevrolet Silverado 2500 if you install the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1016 . However, if you have the factory rail kit in your 2016 Chevy you will not be able to install the gooseneck hitch. If that's the case, you can use the Replacement Base for the B&W Companion # BWRVB3700 and use the head from the fifth wheel hitch you have with your factory...
view full answer... - Is There a Taller Gooseneck Ball Available for B&W Turnoverball HitchThere are two options you can use for a bit of added height when using your B&W Turnoverball Underbed Gooseneck Hitch # BWGNRK1016. You can get an extra 1" by using the High-Rise Ball for B&W Turnoverball # BWGNXA2050. You can also use the B&W Turnoverball with 4" Offset # BWGNXA4085, which is roughly 5-3/4" tall (1-11/16" taller) from the base of the truckbed to the top of the ball. This gooseneck ball has a 4" offset, so it will move the hitch ball 4" further away from your truck cab,...
view full answer...
- B&W Companion 5TH Wheel Hitch For A 2016 Chevrolet Silverado 2500HD Long BedYes, the B&W Companion 5th Wheel Trailer Hitch # BWRVK3500-5W will work with all of the B&W Turnover Ball gooseneck hitches. On the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1016 for your 2016 Chevrolet Silverado 2500, you will remove the ball from the hitch and drop in the Companion hitch. Once you have the hitch locked in to the receiver there is a draw down bolt that will tighten the hitch to the bed of your Silverado.
view full answer... - Fifth Wheel Hitch Recommendation for 2018 Chevy Silverado 2500For your 2018 Chevy Silverado 2500 you'd want to go with a fifth wheel hitch since that's what your camper is going to be designed and set up for. The B and W Companion Hitch like part # BWRVK3500 for a fixed hitch (if you have a long bed) or the part # BWRVK3400 for a slider hitch (for if you have a short bed) would be the way to go as these hitches are considered by many as the nicest hitches around. To install the hitch you'll need the correct rail kit which is the part # BWGNRK1016...
view full answer... - Air Lift LoadLifter 5000 Ultimate Plus Compatibility With B&W Turnover Ball for 2019 Chevy 2500Yes, the Air Lift LoadLifter 5000 Ultimate Air Springs # AL88338 and the B&W Turnoverball Underbed Gooseneck Trailer Hitch, # BWGNRK1016 are both confirmed to fit the 2019 Chevrolet Silverado 2500. There may be an issue with installation on your vehicle, it will happen with some models. However, that is addressed by Airlift on page 2 of the installation instructions. The drawing has a note for optional hardware installation along with further details on page 9. You simply need to use...
view full answer... - Rail Kit to Install B and W Turnoverball Hitch from 2008 Chevy to 2019 GMC 2500 SierraYou'll need a new rail kit but you can reuse the center section of your B and W Turnoverball rail kit. What you'd just need is the rail kit part # BWGNRM1016 with your current center section and you'd essentially have the # BWGNRK1016 which is the correct fit for your 2019 GMC Sierra 2500.
view full answer... - Does Heat Shield on 2016 GMC Sierra 3500HD have to be Removed to Install B&W Gooseneck Trailer HitchThe heat shield does have to be removed to install B&W gooseneck trailer hitch # BWGNRK1016 on your 2016 GMC Sierra 3500 because it is in a position that interferes with the hitch installation. All of the gooseneck hitches for your truck will either need to have the heat shield removed or trimmed for installation.
view full answer... - Is the Shank of the B&W Gooseneck Hitch Ball BWGNXA2010 2 inches SquareThe Hitch Ball for B&W Turnoverball Gooseneck Trailer Hitch # BWGNXA2010 comes with a 2 inch hitch ball and is meant to fit a B&W Turnoverball Underbed Gooseneck Trailer Hitch like part # BWGNRK1016 which fits 2016-2017 GMC and Chevy Silverado pickup trucks. Unless you have a B&W Turnoverball Gooseneck Trailer Hitch installed this will not fit your gooseneck hitch. The shank is 2-1/2 inches squared. If you do not have a B&W Gooseneck Hitch then let me know what kind of hitch you have an...
view full answer... - Can B&W Gooseneck Hitch from 2015 Chevy Silverado 2500 Convert to 2018 ModelFrom 2015 to 2016 there was a big enough change to the Chevy Silverado 2500 models that B and W had to come out with an all new hitch fit for the truck. That means that for your 2018 model you'd need the # BWGNRK1016 for an all new kit or if you wanted just the rails to move the center section to the new truck you'd want the part # BWGNRM1016.
view full answer... - Hole Location for B&W Turnoverball Gooseneck Hitch on 2016 Chevy Silverado 2500For your 2016 Chevy Silverado 2500 the correct B&W Underbed Gooseneck Trailer Hitch is the part # BWGNRK1016. If you have a short bed truck (less than 8 feet) the center of the 4 inch hole will be located 44-3/4 inches from the rear of the bed. If you have the 8 foot long bed then the center of the hole will be 49-1/2 inches from the rear. I have attached the complete installation instructions along with an install video that you can use for reference. The B&W # BWGNRK1012 that you...
view full answer...
- Can B&W Companion Fit Industry Standard RailsHi Dave; the B&W Companion like your # BWRVK3770 is only compatible with the puck system or the B&W Turnoverball. Unfortunately, there is no way to adapt it to industry standard rails. If you have a 2016-2019 Silverado 2500 you can install the B&W Turnoverball # BWGNRK1016 and swap out the base for # BWRVB3405. If you have the 2020-2024 you can use the # BWGNRK1020 instead. The only other option would be to sell your Companion and replace it with the Patriot # BWRVK3270 which is designed...
view full answer...
Do you have a question about this Gooseneck Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Jacob H
Video by:
Thomas T
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Noah M
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Bradley B
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Larry P.
2/19/2024
This is an excellent and well built product! Even the directions made sense, almost like they were written by someone who speaks the language. I would give this 5 stars.