T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• Trailer Wiring Harness Needed for 2004 Nissan Titan
  Take a look at the video I've linked of the 2010 Titan. If your 2004 Nissan Titan has this same connector then instead of the # C59236 you can use the # 118384 to provide a 4-way trailer connector. Of if you need a 7-way connector use # N40975.
  view full answer...
• Does The Draw-Tite Max-Frame Trailer Hitch 75713 Come With Mounting Hardware?
  They actually are not, but fret not! The Draw-Tite Max-Frame Trailer Hitch # 75713 will utilize existing bolts on your 2018 Dodge Durango. If you watch the install video I have included below, it will show you exactly where these bolts are located. It's a total of 4 bolts (2 bolts on each side of the vehicle), so it will be a pretty quick and straight forward install as well. Install instructions are also included below. Just as a side note, if you will be towing with this hitch, you...
  view full answer...
• No Brake or Turn Signals With Trailer Wiring Harness On a 2007 GMC Acadia
  I am not sure which exact trailer wiring harness you are using but if you have one that plugs into the factory tow package plug like the T-One Vehicle Wiring Harness part # 118384 for example then the issue you are having would lead me to believe that you are missing some fuses/relays or they are blown. I took a look in your owner's manual and it lists two fuses for the stop/turn signal lights, "LT TRLR STOP/TRN" for the left stop/turn circuits and "RT TRLR STOP/TRN" for the right stop/turn...
  view full answer...
• How to Access Lighting Signals in Silverado 4-Pole Wiring
  If your Silverado already has 4-pole trailer wring in place you can use a T-connector harness like # 118384 or # C55384 to give you access to the stop/turn/running light signals you need for your new tail lights. As long as your existing wiring uses a round U.S. Car type connector the above part will simply plug in inline with that wiring and give you the same signals. You can refer to the linked article for more on wiring. In 4-pole wiring the white wire is ground, the brown wire is...
  view full answer...
• Recommended Trailer Hitch Receiver And Wiring Harness For 2019 Jeep Grand Cherokee
  For your 2019 Jeep Grand Cherokee I recommend the etrailer Trailer Hitch Receiver # e98901 which has the highest ratings for towing at a maximum tongue weight of 600lbs, and a maximum trailer weight of 6000lbs, and the matte black powder coat finish will protect the hitch from chips and scratches to keep it looking new. Since the towing capacity of your Jeep is based on which engine you have, and if you have HD or Standard cooling, I recommend checking your owner's manual , or calling your...
  view full answer...
• How To Find Where the Trailer Running Light Relay Is Located On a Vehicle with Factory Wiring
  I am not sure what vehicle this is in reference to but in order to find out where your trailer running light relay is located you have two options. The first option is to check your copy of the owner's manual to see if it is listed here. If it is not listed in your copy of the owner's manual then you will need to check the underside of the lid for the engine bay fuse box. If you can provide me with the year, make, and model of the tow vehicle I can then look this up for you if listed in...
  view full answer...
• Does T-One Vehicle Wiring Harness 118384 have Combined Brake Light and Turn Signal Functions
  Tow package wiring on a vehicle is already converted to combine the brake and turn signal lights onto the same circuit which is what trailers use. Wiring harness # 118384 Tees in line with the factory 7-Way wiring and provides a 4-Way flat connector in addition to the factory 7-Way so when using it the brake and turn signal lights will also be on the same circuits.
  view full answer...
• Replacement Trailer Harness for 2012 Toyota Tacoma
  We have the part # 74682 which is a fit for your 2012 Toyota Tacoma and will provide you with a 7 and 4-way. For just a 4-way you would need the part # 118384.
  view full answer...
• Troubleshooting Trailer Running Lights Not Working Using a 7-Way to 5-Way Adapter, 2008 GMC Yukon
  You will want to make sure that the 5-Way portion of the adapter is pinned out to match the 5-Way on the trailer. You will need a circuit tester like # PTW2993. Test the adapter when it is plugged into the 7-Way on your 2008 GMC Yukon to determine which pin is for the running lights. Then make sure the corresponding pin on the trailer side connector matches. If not, you will need to re-pin either the trailer side connector or the adapter to match. If there is no signal at the adapter,...
  view full answer...
• Availability of Plug-In 4-Pole Trailer Connector for 2000 Chevrolet Silverado
  If your 2000 Chevrolet Silverado has a factory 7-way trailer connector with a round U.S. Car connector at the back (please see photo) you can use part # 74682 to provide both 7-way and 4-pole connectors in one housing. If you prefer them to be separated then instead you can use harness # 118384 which will connect inline with the existing 7-way's connectors. Both connectors will be active at the same time. You also have the option of wiring in a totally separate universal 4-pole trailer...
  view full answer...
  
• Does The Draw-Tite Class III Hitch # 75699 Fit Under The Bumper On A 2011 Jeep Grand Cherokee
  The Draw-Tite Class III 2 Inch Hitch, part # 75699, will install under the bumper on your 2011 Jeep Grand Cherokee. I am including a picture to the right that will show the proper position of the hitch on a Jeep Grand Cherokee. Also, I am including a link to the installation instructions for the Draw-Tite hitch. If you will be towing with this hitch you will want to check your owners manual or the Jeep dealer for the towing capacity of your 2010 Jeep Grand Cherokee. To complete your...
  view full answer...
  
• Parts for 7-Way for 2020 Jeep Grand Cherokee Without Factory Harness
  So you can add a 7-way to your 2020 Jeep Grand Cherokee, but without the factory tow package/harness you won't be able to utilize the Hopkins 7- and 4-Pole Trailer Connector Socket # HM40975, which is what I believe you were referring to in regards to "spring loaded doors." The 4-way # 118384 you referenced is also something that plugs directly into the factory tow package and is unable to plug into a 4-way. With out the factory tow package, to add a 7-way, the first thing needed is the...
  view full answer...
• Will the Curt Hitch for the 2017 Jeep Grand Cherokee Fit the 2018 Model
  The hitches for the 2017 and 2018 Jeep Grand Cherokee will be the same fit. The Curt Hitch # C13182 will be a great fit for your Grand Cherokee. If you plan on using your hitch to haul a trailer, you will need a trailer wiring kit. If your Jeep is equipped with a factory tow package you can use # 118384. If it is not, you will need # 118727.
  view full answer...
• How To Install 4-Way Plug On 2010 Dodge Ram Pickup for Tailgate Light and Keep Factory Connector
  Yes, the T-One Vehicle Wiring Harness part # 118384 simply tees into the rear trailer connector on a (2010 Dodge Ram Pickup) allowing you to keep the factory connector. Then you can run the 4-way lead up to the light strip. If the light strip does not have a 4-way you can simply cut off the 4-way on the harness and hardwire to the light. Please note, you'll only be able to obtain combined brake and turn signals with this method. If you need them separate you'll need to install a converter...
  view full answer...
• 7 to 4-Way Adapter for 2010 Buick Enclave w/ Factory Tow Package
  If your Enclave has the 7-Way connector that has the factory harness that plugs into the rear of it, the 4-Pole Trailer Adapter for GM trucks with Factory 7 Way, part # 118384 will work great for you. Another option would be to use an adapter that would plug into the front of the 7-way, like the 7 to 4-Way Adapter with Tester, part # 47345.
  view full answer...
• No Running Light On My Trailer When Connected To My 2011 Ram Sport
  Under the hood of your 2011 Dodge Ram there should be a 20 amp fuse for the trailer running lights. It is a fairly common problem with your generation of truck that fuse ends up blowing. There should be a legend on the fuse box or you can find it in your owners manual that details where all the different fuses are. Use that to find the correct fuse and replace it.
  view full answer...
• Part Needed to Add Second 4-Way to Rear of 2016 Ford F-150
  What you could use is the part # 118384. This 4-way will plug in line with the 7-way you have at the rear of your 2016 Ford F-150 and it will provide you with an additional 4-way at the rear of your truck.
  view full answer...
• Harness to Add Second 4-Way to 2016 Toyota Tundra
  To add an additional 4-way you would want the part # 118384 which will install inline with your 7-way and give you an additional 4-way. So that you can use a 4-way to control your trailer's separate taillights you would want the part # C56196. You will have to install this on the wiring of your trailer.
  view full answer...
  
• Will Curt Class III Trailer Hitch # 13245 Fit a 2009 Jeep Liberty with 2 Wheel Drive
  Any of the trailer hitches listed for the 2009 Jeep Liberty will fit any model, 2 wheel drive or 4 wheel drive. This includes the Curt Class III Trailer Hitch, # 13245, that you have referenced. I have included a link to the installation details for reference and a link to all of the available hitches for the 2009 Liberty. If you plan on doing some towing with the hitch, the recommended ball mount is # C45010 with pin and clip # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 63845...
  view full answer...
• Where is the Connection Point For Trailer Wiring Harness # 118384 on a 2011 Jeep Liberty
  The Tow Ready Custom Fit Vehicle Wiring, # 118384, is designed to fit if your 2011 Jeep Liberty already has a factory 7-Way and you want to replace it with a 4-Way. The connection point is located behind the factory installed 7-way trailer connector, or up by the spare tire of the Jeep Liberty (GM Jeep Liberty only). I have included a link to the installation details for reference. If your Liberty did not come with a factory 7-Way trailer connector, you will need to use Draw-Tite Custom...
  view full answer...
• Troubleshooting Trailer Running Lights Not Working with Ram Truck
  If the trailer running lights aren't working when hooked up to your Ram and all the related fuses are good then I recommend testing the connector at the rear bumper to narrow down the area of concern. Use a circuit tester like # PTW2979 and test the running lights pin on the connector while you have that function activated on the truck. If you are getting power then you know the problem is somewhere on the trailer. If you don't get power then it's somewhere on the truck. If you didn't...
  view full answer...
• Adding a 7-Way Trailer Connector to a 2012 Dodge Ram 2500 Big Horn With Flatbed
  If your 2012 Dodge Ram 2500 came with a factory tow package that included a 7-Way at the back of the vehicle, you can use 5th wheel and gooseneck in-bed wiring harness, # 50-97-410. This harness plugs in line with the factory wiring harness under the truck and provides a 7-Way in the bed area. If the truck did not come with a factory tow package that included a trailer connector, you will have to hardwire one in starting with a 4-Way using # 119178KIT. A T-connector is not available. Once...
  view full answer...
• Will T-One 4-Flat Work on 2024 Chevy Silverado Without Throwing Codes
  Yes, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118384 will work on your 2024 Chevy Silverado and not throw any codes. This is what most people use it for, to make installing that light bar easier.
  view full answer...
• Second 4-Way Wiring Harness For 2016 Ford F-150
  To add a second 4 way to your factory system, you only need to add a adapter from your 7 way since you already have a separate 4 way. I recommend using the Adapter 7 Pole to 4 Pole with Tester and Cover, # 47345. I reached out to my contact at Cequent and the T-One # 118384 should fit without issue if you want the second 4 way in line. The only reason why the male end may not connect properly is if there is a bent pin on the male side or something stuck in the female side of that same...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?