bing tracking image
  1. Accessories and Parts
  2. etrailer
  3. Camper Jacks
  4. Trailer Jack
  5. Handles and Cranks
  6. Sidewind
Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear

Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear

Item # RVLG-HDL
Retail:$27.60
Our Price: $26.25
You Save: 5%
Accessories and Parts
Shipping Weight: 3 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs. 1-800-940-8924 to order etrailer accessories and parts part number RVLG-HDL or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (49)
  • Q & A (0)
  • Videos (2)
  • Photos

etrailer Accessories and Parts - RVLG-HDL

  • Camper Jacks
  • Trailer Jack
  • Handles and Cranks
  • Sidewind
  • etrailer

Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs.


Features:

  • Replaces the crank handle from your etrailer or Ram 5th-wheel landing gear set (RVLG-8HDL)
  • Durable steel construction with corrosion-resistant zinc-plated finish
  • Handle radius: 8-1/2"


RVLG-HDL Replacement Manual Crank Handle for Ram 5th Wheel Landing Gear





Video of Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer and Ram 5th Wheel Landing Gear Replacement Crank Handle Review

John: Hey guys, John here from etrailer.com. Today we're going to take a look at the Replacement Hand Crank for the etrailer.com Landing Gear Set. As I said, it's a replacement hand crank here, so you're going to fit it on the end of your landing gear. This is going to be used for if you don't have the electric gear motor here, or maybe you're at the campsite and you've lost power. This still allows you to operate your landing gear and raise and lower it.It's going to feature a nice long handle, which helps give us some more torque. This landing gear is rated for 8,000 pounds, so depending on your trailer it might be a little more difficult to raise and lower the legs.

As you can see, the grips here, they spin freely, which allows for easier operation of the landing gear. It has a nice clear zinc coated finish which helps prevent rust and corrosion.One thing I would like to point out, a common question I've gotten from customers is whether they can use this with other landing gear sets. It kind of depends. There is no standard dimensions for this fitting, and so your best bet is to just get the exact replacement for your landing gear set. That'll complete our look at the Replacement Handle here for the etrailer.com Landing Gear.

Thanks for watching.

Customer Satisfaction Score:


Customer Reviews

Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear - RVLG-HDL

Average Customer Rating:  4.7 out of 5 stars   (49 Customer Reviews)

Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs.

by:

Exactly what we needed, great product, delivered fast!

Lyn

5/2/2024

its been a year and still works great



by:

Easy to order and works great on my camper. One of the electric jacks won’t work so it was truly needed. Thank you!



by:

Just as described.



by:

Fit properly. Good quality for the money. I suggest you offer a replacement roll pin or a conversion to a3/4 “ socket. Thank you



by:

Exactly what I needed with fast delivery



by:

Ideal for my application



by:

awesome products, awesome prices and awesome service



by:

Ordering these was a no brainer for our oversized Toy Hauler, the capacity rating was almost double and the physical dimensions were exact replacements for the worn out originals. It only took about an hour start to finish on the install for me to do by myself. I couldn't be happier that I can now raise and lower the trailer via the switch again!



by:

Received in good order, Thank you...



by:

Recieved the product and have installed half of it,got the unit in today looks good ,works well.



by:

Perfect replacement for my bent one.



by:

Great value! I actually got this to use with a military trailer that was missing the handle to crank the jack up & down. Much cheaper than finding the surplus part.



by:

I purchased this handle along with new landing gear, but it didn't actually work. My camper has a smaller guide tube that this handle won't fit inside. The old handle worked fine, my mistake. The new handle is also longer. It is good quality and nicer than my old one. I am happy with the purchase, and I can use it on something else, but I didn't need to buy it.



by:

Product is as described and is of good quality. I bought it as a (replacement) backup for the electrically operated legs on my fifth wheel.



by:

Great product. Took less than an hour to replace the old landing gear with the etrailer brand. Was a direct replacement with no problems. Shipping was fast.



by:

Works very well for my application (military trailer).



by:

Pretty easy install and lifts my heavy toyhauler easier



by:

As advertised came quick, easy order ,
Good
price free shipping ??



by:

It came faster than I thought it would. Haven't tried it yet. But from what I have learned it is exactly what we need to open up our pop outs. Thank you for such fast delivery.



by:

Works great!



by:

Arrived timely and works as expected. Simple transaction
Thank you



by:

Great tool.



by:

Very quick shipment and packed very well. Will use again



by:

Order get here in good time and its what I order.



by:

Great tool perfect


25
49
Show More Reviews

See what our Experts say about this etrailer Accessories and Parts

  • What Is The Shaft Of The Replacement Crank Handle For Etrailer 5th Wheel Landing Gear RVLG-HDL
    The diameter of the shaft of the Replacement Crank Handle # RVLG-HDL that you referenced is 1/2 inch.
    view full answer...
  • Replacement Landing Gear for 2007 Keystone Raptor
    You'll want to confirm the distance between the weld stops where your current landing gear are installed to determine which landing gear set can be used as a replacement. The # RVLG-8000 has 15-1/2" measured from the inside of the weld stop on top to the inside of the weld stop on the bottom, and 17-1/2" from the outside of the top weld stop to the outside of the bottom weld stop. This landing gear set has an 8000-lb capacity and 36-1/2" total lift. If you need a manual crank handle for...
    view full answer...
    Image 1 for
  • Can the Gear Box on the Landing Gear Set RVLG-8000 Be Turned
    The gearbox on the Landing Gear Set part # RVLG-8000 can be rotated 90 degrees so that the drive shaft is positioned in front of the leg. That said, you will need to make sure you have adequate clearance to make a full rotation on the handle. The actual handle is not included either so if you don't have one you will also need the Replacement Crank Handle part # RVLG-HDL.
    view full answer...
  • Replacement Crank Handle for Ram 5th Wheel Landing Gear Compatibility With 2007 Fleetwood Nitrous TT
    I don't have any way of determining if the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-HDL will work with your 2007 Fleetwood Nitrous Hyperlite TT Toy Hauler or not, unfortunately. The Replacement Crank Handle # RVLG-HDL is designed to be a replacement for Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-8HDL. The part where # RVLG-HDL connects to the landing gear is 1/2" while the outer sleeve has a diameter of 3/4". I recommend...
    view full answer...
  • What Is The Overall Length Of The Replacement Crank Handle For Etrailer 5th Wheel Landing Gear?
    The Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-HDL measures 31" long, including the handle on the end. The crank assembly itself measures 27" not including the handle on the end. I attached a photo diagram along with a demonstration video for you.
    view full answer...
    Image 1 for
  • What Is The Difference Between The Landing Gear Set RVLG-8000 & RVLG-8HDL?
    The only difference between the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-8HDL that you mentioned, and the Landing Gear Set # RVLG-8000 is that # RVLG-8HDL comes with the handle, whereas if you were to go with # RVLG-8000 you'd need to purchase the handle separate with # RVLG-HDL. Both of these systems are rated for the same 8,000lbs capacity limit, and have 36-1/2" of total lift. Additionally, both of these can also be upgraded from manual to electric...
    view full answer...
  • How to Determine Correct Landing Gear for Fifth Wheel Trailer
    We may have landing gear that works for you, though there isn't any landing gear that will work with space between brackets of 21-1/2 inches, though I'm wondering if maybe you measured from the top of one bracket to the bottom of the other? That would make sense since brackets are about 2 inches, and where you might get 21-1/2 inches. But to determine the correct replacement landing gear, you will need to measure the mounting brackets on your trailer from the underside of the top bracket...
    view full answer...
    Image 1 for
  • Depth of Slot on RVLG-HDL and LC119226 Replacement 5th Wheel Landing Gear Crank Handles
    On the Lippert # LC119226, the slot in question is 1/4 inch wide by 3/8 of an inch deep, on the # RVLG-HDL it measure 1/4 inch wide by 7/16 of an inch deep. You can see these photos in the photo I've provided.
    view full answer...
    Image 1 for
  • Compatibility of Landing Gear # RVLG-800 with 2011 Heartland Big Country 3450ts Trailer
    The etrailer.com Landing Gear Set - 20-1/2" Travel - 8,000 lbs # RVLG-8000 will fit your 2011 Heartland Big Country as long as the legs are a minimum of 44-1/2 inches in between and a maximum of 72 inches apart. The weld stops measure 15-1/2 inches inside to inside and 17-1/2 inches outside to outside. I've attached a picture to assist. The hand crank is available as a separate item and is part # RVLG-HDL.
    view full answer...
    Image 1 for
  • Is the etrailer.com Landing Gear Set RVLG-8000 a Replacement Fit for a 1998 Sandpiper 5th Wheel
    Our Landing Gear Set - 20-1/2" Travel - 8,000 lbs # RVLG-8000 has the weld stops in the standard dimensions where the inside measurement of the weld stops is 15-1/2 inches and the outside measurement is 17-1/2 inches (see attached picture). Since we do not have access to every trailer and RVs landing gear specs you will need to go measure where the weld stops are on your current landing gear. These should fit though since they use the standard weld stop locations. You have the option of...
    view full answer...
    Image 1 for
  • Replacement Landing Gear Set for a 1991 Avalon 5th Wheel Trailer
    To choose the correct replacement landing gear set you simply need to determine the spacing between the weld stops on your current landing gear set. The standard measurement is 15-1/2" inside to inside or 17-1/2" outside to outside. For this measurement I recommend the Landing Gear Set # RVLG-8000 because it gives you 36-1/2" of lift and is rated for 8,000 lbs. For this you can either use the manual hand crank # RVLG-HDL or the 12V DC Motor # M1230 and Switch # LG-145236 for operation. If...
    view full answer...
    Image 1 for Image 2 for
  • Determining Which Replacement Landing Gear Fits 2007 Everest 5th Wheel Trailer
    I would be happy to help you find the correct replacement landing gear for your 2007 Everest 5th Wheel trailer, but the only way to confirm this will be to measure the weld stops of your current landing gear setup. For example the Landing Gear Set - 36-1/2" Lift - 8,000 lbs # RVLG-8000 you were looking at has weld stops that measure 15-1/2" inside to inside and 17-1/2" outside to outside as shown in the included diagram. Now this set does not include a crank handle or electric motor so...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 2004 Keystone Laredo 29BH
    The # RVLG-8000 you were looking at would work well for replacement landing gear on your 2004 Keystone Laredo 29BH. The manual hand crank # RVLG-HDL is sold separately. You can also add a switch # LG-145236 and motor # LC142178 for a power option. Another great option would be the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. The jacks each have a motor so they function independently. This means you can easily level your 5th wheel on uneven surfaces while you're camping or...
    view full answer...
  • Dimensions of Replacement Crank Handle # LG-119226
    The inner diameter of the Replacement Crank Handle # LG-119226 where it connects to the landing gear is 1/2" while the diameter of the outer sleeve on the landing gear end is 3/4". Please note that this is designed for use with Stromberg Carlson landing gear # LG-1, # LG-2, # LG-3, # LG-4, or # LG-183708. It can fit with a lot of other brands like Atwood or Lippert but if you don't have this landing gear just let me know what you have and I can see if we have one that is compatible with...
    view full answer...
    Image 1 for
  • DIameter of Replacement Crank Handle for Landing Gear
    The inside diameter of the end of the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-HDL is 1/2 inch, and the outside diameter is 13/16 inches.
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 1989 Nu Wa Hitchhicker 5th Wheel Trailer
    The Landing Gear Set # RVLG-8000 will work but you will have to have the weld stops removed and new ones welded on. If you check out the attached picture you can see where the inside distance of the weld stops measures 15-1/2". Even with those brackets mounted on the inside the distance between them would be about 11-1/2". Even though you will have to have the weld stops relocated I recommend using this landing gear set because I have never heard of the weld stops being located where...
    view full answer...
    Image 1 for Image 2 for
  • Is Replacement Gearbox for Landing Gear with Atwood 75721 Motor Available
    I did some checking and it looks like there aren't any replacement gearbox or even motor parts for your Atwood landing gear so if you believe that the issue is related internally you will unfortunately need to get a new landing gear set. The 8K Landing Gear Set # RVLG-8000 should fit directly with what you have as the weld stop locations are the typical 15-1/2" and 171/2" measurements (see attached photo). You can use the manual hand crank # RVLG-HDL or the 12V DC Motor # M1230 with the...
    view full answer...
    Image 1 for Image 2 for
  • How to Determine Correct Landing Gear For 2021 Coachmen Chaparral Lite
    While we don't have any way of knowing the specific landing gear that fits a 2021 Coachmen Chaparral Lite, I can tell you how to determine if you can use the Landing Gear Set # RVLG-8000. All you will need to do is measure the distance between your current mounting brackets, which should have the standard dimensions of 17-1/2 inches. The 8,000 lb capacity will be more than enough, so just be sure 36-1/2 inches is the appropriate amount of lift. Then for a crank handle use part # RVLG-HDL.
    view full answer...
  • Landing Gear Recommendation For 2010 Keystone Raptor Toy Hauler
    While I do not have any way of knowing what your 2010 Keystone Raptor Toy Hauler's pin weight is for selecting landing gear due to there being multiple floor plans and depending on what you're carrying in the trailer, I can tell you that landing gear such as the # RVLG-8000 will work perfectly. The # RVLG-8000 is rated for up to 8,000lbs which is more than strong enough for virtually every 5th wheel, and can be manual used with the hand crank # RVLG-HDL or you can add the electric motor...
    view full answer...
    Image 1 for
  • Troubleshooting Atwood Landing Gear Leg That Doesnt Move
    It sounds like the screw itself is damaged if the motor and gears are turning but the leg isn't moving. Atwood no longer is in the 5th wheel landing gear business so I recommend replacing your landing gear completely. The reason you would need to change out your whole set is because both legs need to move at the same ratio so that your trailer raises and lowers evenly on both sides. Since replacement parts are already becoming scarce for Atwood landing gear it would be better in the long...
    view full answer...
    Image 1 for
  • Inside and Outside Diameter of Slotted End on Replacement Crank Handle RVLG-HDL
    The inside diameter of the portion of the handle that fits into the jack, is approximately 1/2 inches, while the outiside diameter is closer to 13/16 inches. The etrailer Crank Handle # RVLG-HDL is designed to be used with Landing Gear Set # RVLG-8000.
    view full answer...
    Image 1 for
  • Replacement Landing Gear for a 1999 Komfort 5th Wheel Trailer
    Landing gear are pretty universal as long as the weight capacities and weld stop locations match up. If you can get me the make and model of your current landing gear I can see if we have any that match, otherwise you're looking at a whole new kit. If you need a whole new kit or you aren't able to identify your current landing gear then I recommend checking out the Landing Gear Set # RVLG-8000 which is rated for 8,000 lbs and has the weld stops spaced 15-1/2" apart inside to inside (see...
    view full answer...
    Image 1 for
  • Landing Gear Replacement for 2007 Keystone Cougar 29BHS
    If your brackets are 2" tall then you most likely have the standard weld stop measurements of 15-1/2" inside to inside (see attached photo). With this being the case I recommend going with the Landing Gear Set # RVLG-8000 which has a weight rating of 8,000 lbs and offers 20-1/2" of travel. Since you have an older trailer I bet the weld stops have just been wedged in the mounting brackets which is why you are having a hard time finding them. This set comes with the gearbox and you can either...
    view full answer...
    Image 1 for
  • How To Manual Raise And Lower RV Jacks When They Fail
    Most electric tongue jacks, like the Lippert Electric Trailer Jack with Footplate # LC285318 you were looking at, have a manual override in the top of the head. Simply remove the rubber gasket and use a crank like # LC285324 to manually operate your jack. If you have a fifth wheel landing gear you're trying to raise or lower then you would need to use a landing gear crank like # RVLG-HDL or # LC119226 and can find the manual override on the driver's side where the motor is located.
    view full answer...
    Image 1 for Image 2 for


< Previous



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Joshua S
Video Edited:
Joshua S
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.