Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1
(457 reviews)
Price: $37.69
In Stock
Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1
Item # 23-0001
Retail:$57.07
Our Price: $37.69
You Save: 34%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (457)
- Q & A (0)
- Videos (1)
- Photos
Westin Accessories and Parts - 23-0001
- Nerf Bars - Running Boards
- Step Pad
- 5 Pegs
- Westin
- With Clips
- 21 Inch Long
Replace a damaged or worn-out step pad on your Westin E-Series 3" diameter step bar with this non-slip polymer plastic pad. The UV-resistant material will not crack or fade. 5 Barrel clips (included) are required for installation.
Features:
- Replaces 1 step pad on your Westin E-Series 3" diameter step bar
- Constructed of non-slip polymer plastic for a firm step surface
- Fits either front or rear step pad area
- Requires 5 barrel clips (included) for installation
- Measures 21" long x 3" wide
23-0001 Westin Replacement Step Pad for 3" E-Series Tube Steps
California residents: click here
Video of Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Westin Nerf Bar Parts - Replacement Step Pad - 23-0001
Ellen: Hey, everyone. I'm Ellen, here at etrailer.com. Today we're taking a look at the Replacement Step Pad for Westin E-Series Nerf Bars. This is just going to replace that worn-out, or maybe damaged footpad on your bars, so that you can complete the look of that, and replace out that pad. It's going to be constructed out of a non-slip polymer plastic. So it's going to give you a nice, solid stepping surface.It will have a couple of ridges here on either side to give us some grip, as well as the embossed or raised Westin logo there.
So we should have a pretty easy time stepping up and stepping down on this without any issues of slipping or sliding on that bar. The text is a little bit higher than the rest of this, so it should give us a good step there, a good tread.It also comes with the little barrel clips for installation. So we'll get five of these, one to go on each of those little prongs coming out. So you put that down over each one, and then as you push it in, the little tabs on either side will expand inside the bar and hold that in place. Of course, you do want to slide this all the way down, so its seated flush on the bar, on that little prong.
Again, it does come with five of those, so you can get that installed securely.And as far as the size, overall, it measures about 21 inches long from tip-to-tip, and then about 3 inches wide. Really, if we want to get more exact, it's more like 3-1/4. Actually, no. It really is right at 3 inches. And then the distance in between each of our prongs is going to be a little bit different per each one.
Between these two, it's about 3-5/8ths, and then 5-5/8ths, 6-5/8ths. Or 6-3/8ths, excuse me. And then again, 3-5/8ths. So it should fit that same step area on your pad. And that's going to do it for our look at the Replacement Step Pad for the Westin E-Series Nerf Bars..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1 - 23-0001
Average Customer Rating: 4.8 out of 5 stars (457 Customer Reviews)
Replace a damaged or worn-out step pad on your Westin E-Series 3" diameter step bar with this non-slip polymer plastic pad. The UV-resistant material will not crack or fade. 5 Barrel clips (included) are required for installation.by: Jimmy L05/19/2024
It was good I guess. The front mounting stud broke off while I was installing it. Hopefully it will last a while.
by: Robert W.01/22/2017
I purchased my truck new but the dealer had a local company install an aftermarket trim package that included nerf bars. The step pads eventually started to fail. Trying to find replacements for an unknown brand was iffy at best. When I found the Westin site they offered a diagram with exact measurements for the mounting points. Easy to follow instructions made removal and replacement a breeze and took less than an hour. Perfect fit!
The ordering process and follow-up by etrailer made for an enjoyable shopping experience. Thanks guys!
by: Francisco07/20/2023
I surprise myself on how fast and easy it was to install my new Westin pads
by: Joan02/12/2024
They came with great instructions for easy installation. I had been searching for this and everything I've order, didn't fit. The measurements in the description were right on.
by: Jeff 07/15/2022
Nice to be able to get replacement pads for 10 year old nerf bars. To install just follow instructions. My old pads were coming apart. When I pulled them off the plastic studs were still in the barrel chips. Drilled out the plastic stubs and pulled out the barrel chips with needle nose pliers.
by: Angie 03/19/2024
Step Pad fit perfectly. Quick and easy install
by: Andrew02/11/2021
Bought 2 of these on a chance that they would replace the ones on my Back Country Bars that lost 2 of the step pads somewhere on the road. I only had to drill the holes a little larger and they fit great! Will buy two more to have all the step pads matching
by: James 08/24/2022
Was a perfect fit to the step pads on the nerf running boards.
James
8/25/2023
Step pads fit great & looked good. The truck was sold months ago so can’t do a long term review.
by: John 03/14/2023
Fits perfectly. Great item
John
3/15/2024
Still in good shape will buy again.
by: Kevin 05/27/2024
Perfect fit. Easy to install.
by: Romeo G.04/11/2020
I’ve installed my replacement Westin nerf pads. They fit perfectly! I’m thankful I found etrailer!
Romeo G.
4/12/2021
Its great I cant complain
by: Bob S08/16/2017
WOW, Shawn B., one of your customer service reps did an EXCELLENT job of helping me get the correct replacement pad for my nerf bars. I looked high and low for them in many places and could not find them and was afraid that I would have to buy new nerfs. That is until I contacted etrailer and spoke to Shawn B. I forwarded the requested information about my nerf bar pads with photos and the next day I received the information on the pads that should fit. They were indeed the correct ones. Now my nerfs bars look as good as new. GREAT JOB. Thank you etrailer and Shawn B.
by: Charles11/14/2020
Perfect replacment for the truck champ step
Easy to install, just remove old pegs, replace the steel slots supplied, tap step down with rubber mallet
Charles W.
11/15/2021
Great! Going to outlast the steps this time!!!
by: David05/31/2020
Arrived sooner than expected and fit perfectly, it took a while to get the old clips out but only took about five minutes to install the new ones i was worried that they might not fit right because the nerf bars are truck champs but they were an exact match and also a little cheaper in price than anywhere else I checked.
by: Randy10/04/2019
product is good. i used this one as a universal fit for a different type nerf bars, its the only one i could find that is 21 inches long, same as original one. i had to drill new holes as the prongs dont match original holes.
by: Barry 05/11/2024
It fits just right.
by: Kim C.07/08/2015
The replacement step pads for the Westin Nerf Bar are a great direct replacement part. Unlike the other parts dealers online, the etrailer.com part came with the mounting hardware, so everything came in one complete ready to install package. The parts were professionally wrapped for protection and arrived a day early.
by: David 04/12/2024
They look fine, just doesn't seat well on one end right now, hopefully in time it will.
by: David11/03/2018
I am so pleased with the replacement pads for my running boards. I also want to thank the staff at your facility especially Meghan. She spent an enormous chunk of time sorting through the products and came up with a perfect match for me. I returned home Saturday afternoon and the package was at my front door. I immediately opened the package and installed the replacement running board step pads . Thanks again for your expert advice and help .
by: Linda08/13/2018
The replacement step pad was exactly what I needed. The product description made it easy to confirm that it was the right replacement and installation was quick and easy. The hardest part was getting out the old clips. I would definitely order from etrailer.com again.
by: Randal02/01/2018
I was very happy with my purchase from etrailer.com. My Westin step pads arrived very quickly through the mail and was able to install them without much difficulty. Overall it was a very nice process.
by: Tracy 03/27/2024
Perfect fit. Very quick delivery. Thank you for including measurements of the product on your website. Very helpful.
by: Sandra 09/14/2023
Prompt shipping and only site that actually showed the measurements so I knew I was ordering the correct replacement.
by: Donnie P10/18/2016
Thank you for my replacement steps!
They worked perfectly, easy to install & would recommend them to anyone. My old ones were really weather cracked.
They look great now!
Thanks again Donnie P.
by: Ted R.11/13/2015
I purchased two of there replacement step pads for my pickup. The shipping for these was very fast. They were very easy to install.
25
457
Show More Reviews
See what our Experts say about this Westin Accessories and Parts
- Replacement 21" x 3" Step Pad for Westin Step Bars with 5 PegsThe Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001 has the dimension you mentioned. It is 21" long x 3" wide and has 5 pegs. This is the correct pad for Westin E-Series 3" diameter step bars. I have also included a picture that shows the spacing between the pegs so that you can compare it to what you have to ensure that it will fit.
view full answer...
- Recommended Replacement Nerf Bars for Retrac Steps On a 2012 Chevrolet SilveradoThe closest step pad we carry that matches those measurements is going to be the Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001. This step pad measures 21" long overall is 3" wide, and has 5 pin mounting studs like your current step pad. The only difference is going to be the measurements between the studs. The first stud to the second is 3-5/8", the second to the third stud is 5-5/8", the third to the fourth is 6-3/8", and the fourth to the fifth is 3-5/8". Since we do...
view full answer...
- Availability of Replacement Step Pads for TruckChamp 3 Inch Nerf BarsWhile we don't have a direct replacement step pad for your 3 inch round TruckChamp nerf bars, other people have been able to use the Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001, you referenced. From my research, your TruckChamp step pads are also 21 inches long by 3 inches wide and use 5 barrel clips for installation as well, so this is the closest option we can provide. I've attached a diagram so you can compare the distance between each of the 5 plastic pegs on the bottom...
view full answer...
- What to do if Holes Don't Line Up Correctly for Replacement Step Pad for Westin E-Series Nerf BarsIf the holes from the 3" x 21" Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001 don't line up exactly then you'll have to modify your nerf bars to make them fit - this is why we only recommend direct replacements. The current pricing can be found on the product page. To order more than one you'll just need to change the quantity to the desired amount and the price will reflect that change.
view full answer... - Measuring Step Pad for Replacement When Part Number is Not Cross-ReferencedUnfortunately that part number does not cross-reference with anything I have. I also googled that part number with no results. Can you take some length and width dimensions as well as stud too stud measurements for me so I can determine compatibility based on measurements? I've linked the page to our options to assist. The pin measurements are important so I've attached a photo of the Westin # 23-0001 to assist.
view full answer...
- What are the Dimensions of the Westin Replacement E-series Step PadThe Westin Replacement E-series Step Pad, # 23-0001, measures 21 inches long by 3 inches wide. I have attached a photo showing the dimensions for you to check out. You will also want to get the Barrel Clips, # 23-0002, to attach the step pad to the step bar. Each step pad will require 5 barrel clips.
view full answer...
- Replacement Nerf Bar Pads That Are 21-1/8I cannot be certain as to what nerf bars you currently have on your 2007 Mercury Mountaineer, however I can provide provide you with a replacement nerf bar pad that has nearly the same dimensions as the one's provided. For this, you will want to use the Replacement Step Pad for Westin E-Series Nerf Bars part # 23-0001. These replacement pads have a dimension of 21" long x 3" wide. In order to ensure an exact fit, you will want to measure the peg spacing of your nerf pads, I have attached...
view full answer... - Availability of Replacement Step Pads for UWS Nerf Bars on 2009 GMC Sierra 2500HDWe have actually had a few questions in the past regarding replacement pads for UWS Nerf Bars and when we reached out to them we were told that UWS discontinued their nerf bar line a few years ago. Because of this replacement parts are no longer produced. I did go through our selection of replacement pads from other brands just to see if we might have something with matching dimensions that could work but we do not. I definitely understand it's probably not something you want to hear...
view full answer... - Possible Replacement Step Pad For Retrac Nerf Bars On A 2012 Chevrolet SilveradoWhile we do not carry Retrac products, we still might have a possible option for you. Take a look at the: -Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001. This step pad sounds like what you're looking for, measuring 21" long like you mention, and is 3" wide. Also, these pads also have the rectangle to diamond top shape like you mentioned. These pads are not confirmed to fit so we can't say yes or no, however what you can do is compare the measurements and mounting points...
view full answer...
- Replacement Westin Nerf Bar Pad Recommendation for a 2001 Ford F150If you do have the Westin E-Series Nerf Bars # 23-1880 that you referenced then the correct replacement pad would be the Replacement Step Pad part # 23-0001. These pads are 21 inches in length though. You can also email me back a picture of the pads you still have and I can see if we have the correct replacement part.
view full answer...
- Replacement Nerf Bar Step Pad for 2003 Ford F250 Super DutyWe do offer a replacement step pad that measures 26 x 4 inches. Part # 22-5001 is intended for a Westin Nerf Bar. It's held In place with 7 pins. If this is the correct replacement pad, you'll need 7 barrel clips, part # 23-0002 to hold the pads in place. If your nerf bars aren't from Westin, I can't guarantee that this pad would work. If you're speaking of an OEM Ford nerf board, you'll need to contact Ford for a replacement.
view full answer... - Spacing of Mounting Posts on Westin Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001I pulled a piece of the Westin Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001 from our warehouse so that I could measure the spacing of the 5 mounting posts for you. The spacing dimensions of the posts are shown on the linked photo. The center post is NOT placed dead-center on the pad, by the way. Please note that you will also need to order 5 barrel clips per pad for installation, part # 23-0002.
view full answer...
- Replacement Step Pads for 3 Inch Nerf BarsThere are many step pad replacements available for nerf bars and each one has a slightly different measurement and mounting pin locations. For instance, I've attached the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1 # 23-0001 with a diagram to assist. I've linked the page to all the options we carry.
view full answer...
- Replacement Step Pads for Nerf Bars on 2005 Dodge Ram Quad CabThank you for including a photo of your tube steps for which you need replacement step pads. The measurement of the mounting posts (12-1/2-inches apart) is helpful too. Unfortunately without knowing the manufacturer of the bars I cannot be absolutely certain of the fit of replacement step pads. Somewhere on the bars there will be a manufacturer name and/or part number. We do offer several pads near your specified length, but these use 4, 5 or 6 posts for mounting, not two as yours do, for...
view full answer...
- Recommended Replacement 5-Post Step Pad for Unknown Brand of Nerf BarYou can click on the linked page to see all our brands of tube steps for your 2006 Dodge Ram Pickup. You will want to try to visually match your nerf bars to those shown to narrow down the many options to the specific style and brand you have. First, at the top of the page you can use the drop-down menu bar to select your truck's cab style; this will help narrow down the results. One of your existing step pads may have a logo or branding somewhere on it. Based on your dimensions and 5-post...
view full answer...
- Will Westin Replacement Step Pad # 23-0001 Work With truck Champ Nerf Bars for 2010 SilveradoThe only way to know if the Westin Replacement Step Pad # 23-0001 is to take a few measurements. I have attached a photo of the # 23-0001 with the measurements of the pegs on your nerf pads to make sure they match. barrel nuts are included with the replacement pad. These steps measure 21 inches long x 3 inches wide.
view full answer...
- Westin Step Bars and Replacement Step Pads for a 2001 GMC 2500 HDIf you are looking for replacement step pads, you seem to be describing the step pads for the Westin Signature Series step bars and for the E-series step bars. The replacement step pad for Signature Series step bars is part # 60-2108 and the replacement step pad for E-series step pads is part # 23-0001. You will also need step pads or 5 barrel clips, # 23-0002, for the E-series, # 23-0001, step pads. If you are looking for Westin step bars for your 2001 GMC 2500 HD, then we have a wide...
view full answer... - Replacement Step Pad for Westin Signature Series # 25-2775 on Toyota TacomaThe Westin Signature Series Step Bars, Black Powder Coated, for Toyota Tacoma # 25-2775 will use the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1 # 23-0001. I confirmed this with my contact at Westin.
view full answer... - Replacement Step Pad for Westin E-Series Round Nerf BarsIf you have the Westin E-Series Round Nerf Bars then the correct replacement step pad is the Replacement Step Pad for Westin E-Series Nerf Bars part # 23-0001.
view full answer... - Replacement Pads for Westin Tube Steps on a 2007 Chevy Silverado Classic 1500There are E-Series, Platinum, and Signature Series Westin bars for the 2007 Chevy Silverado Classic. You will need to measure for the overall width and length and the center to center distance between the mounting holes on the bars. If you have the E-Series bars the correct pad is # 23-0001. These pads are 21 inches long, 3 inches wide and have 5 pins with the following distance measurements: 3-5/8 inches from 1st to 2nd, 5-5/8 inches from 2nd to 3rd, 6-3/8 inches from 3rd to 4th, and...
view full answer... - Replacement Step Pad for Westin E-Series Nerf BarsTo replace the step pad on a Westin E-Series Nerf Bar like the # 23-1680 you'll need to use the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1 # 23-0001, which will work on any of the 4 spots these pads sit on either side of your vehicle. You will also need to order 5 barrel clips, # 23-0002, sold in quantities of 1. I've linked an installation video for you to check out as well, that details the process.
view full answer... - Replacement 21 inch by 3 inch Nerf Bar Pad RecommendationThe Westin Replacement E-series Step Pad, # 23-0001, measures 3-5/8, 5-5/8, 6-3/8, 3-5/8 inches from one end pin to the other. I have attached a photo showing the measurements I took for you. It is 21 inches long and 3 inches wide. This certainly does sound like the correct pad for you based on the measurements you have provided. This pad is a replacement for a Westin E-series bar. If you had Westin bars, they should say Westin on the pads.
view full answer...
- Step Pad Replacement for Step Bars on a Chevy Silverado 2500The Westin Replacement E-series Step Pad, # 23-0001, measures 3-5/8, 5-5/8, 6-3/8, 3-5/8 inches from one end pin to the other. I have attached a photo showing the measurements I took for you. It is 21 inches long and 3 inches wide. This certainly does sound like the correct pad for you based on the measurements you have provided. This pad is a replacement for a Westin E-series bar. If you had Westin bars, they should say Westin on the pads. The pads are held onto the bar using barrel...
view full answer...
- Replacement Step Pad That Measures 21 x 3In order to determine what replacement step pad for your running board, I would need to know what you currently have due to the replacements we carry being specific to the running boards. We do have the Replacement Step Pad for Westin E-Series Nerf Bars # 23-0001, however, which measures 21" long and 3" wide for the Westin E-Series Round Nerf Bars # 23-1400 that could work for you, but I can't say for certain.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Test Fit:
Patrick B
Installed by:
Kathleen M
Installed by:
Cole B
Installed by:
David F
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Jessie B
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jeff
7/17/2023
Just as good as the day I installed them.