Replacement Base for PullRite OEX 5th Wheel Trailer Hitches for Chevy/GM

Video Transcript for Review of Pullrite Replacement Base OEX 5th Wheel Trailer Hitches Chevy GM - PUL59ZR

Hi everybody. Andy here with Etrailer.com. Let's take a brief look together at this PullRite Replacement Base for your OEX 5th Wheel trailer hitches for Chevy and GM. Now this has been designed to fit your 2020 and newer Chevy and GM trucks with the factory installed towing prep package. This is going to replace the base on your PullRite OEX 5th Wheel Trailer Hitch. And this is going to work with both Super 5th and SuperLite hitch heads.

Now as you know, PullRite OEX line of hitches are uniquely designed to give you more options. You buy one configuration and if you prefer a different coupling method sometime down the road, you're simply just gonna have to swap out the coupler without the cost of buying a brand new hitch. Now this does have a gross towing capacity of 25,000 pounds with a vertical load limit of 6,250 pounds. And this does not require any adapters, or rails, or tools to install or remove, in and out of the bed of your truck. And this is going to install and remove quickly and easily.

There's not gonna be any binding unlike other OE Puck systems, it's going to simply drop into the four receiver pucks that are built into your factory under bed rails and then secure in place with these top mounted mounting posts. Lemme give you a brief demonstration of how easy these are going to be to operate. So I'm just going to use this one as an example here 'cause just gonna remove the bale pin and these mounting posts are actually removable. So the idea is you could drag this to the pucks in your truck bed without the fear of scratching up the bed of your truck with these posts. And then once you get this base into place over the puck system, then you're just going to drop those mounting posts in and then rotate it just like that.

And then that's going to secure the post, this hitch into the puck system of your truck bed. Taking a look again at the closeup, you can see underneath what's going on there. So when you rotate it, the mounting posts out like that, you're gonna be able to drop it into place. And then when you rotate it back in, that's going to secure this into the puck system. And then you'll just replace the bale pin, like so.

And then that's going to secure those mounting posts into your puck system. So really easy, really convenient. And this is made here in the USA of American Steel and it features a black powder coat finish to help resist that rust and corrosion. This has been tested to SAE J2638 standards and I think that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.