Replacement Hitch Ball Platform for Pro Series Adjustable 3-Ball Mount - 14K

Video Transcript for Review of Pro Series Replacement Hitch Ball Platform - PS63075

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Pro Series replacement adjustable three-ball mount hitch ball platform. This is going to fit your Pro Series adjustable three-ball mount, part number that you can see on the screen there. So obviously this is going to fit in place of that original. This does not include the shank so it's just gonna be the ball platform. So if you are needing to replace that, this is gonna be an exact replacement from Pro Series so it will fit right in place of that original.

Or if you're wanting to add on a ball mount to your weight distribution shank, you can add this on there as well. It's gonna give you a nice sturdy adjustable ball mount there. So this does have the three different hitch ball sizes that's going to allow you to tow different trailers or trailers with different size couplers. Very simple to adjust or switch from one to the other. So you've got the 1-7/8 inch ball that's gonna give you a 2,000 pound gross towing weight.

You've got a two inch ball and that's gonna give you a 10,000 pound gross towing weight, and then the 2-5/16 inch ball that's gonna give you a 14,000 pound gross towing weight. Keep in mind, your whole setup is only as strong as the weakest component, so you wanna make sure that the shank and your hitch and everything else is going to accommodate that weight before you tow anything that's gonna be super heavy for you. So, like I said, very easy to adjust from one ball to the other. When you get it where you want, you just pass that pin through, get that clip put on there and you'll be ready to go. When you're not towing, you can very easily have this flipped over so that there are no balls sticking up.

And then that will give you this step platform so that you can more easily step up into the bed of your truck. So we'll pass that pin through there, get that clip put in there and you can see that this is somewhat textured so it's gonna give you a little bit more traction as you're stepping up into your truck bed. We do have a dual process chrome plating on the balls to provide excellent rust resistance and a black powder coat finish on the rest of it. Again, help resist rust and corrosion. We do have these stainless steel pins that create that sturdy rustproof connection to your shank and make sure that the ball stays in place.

We also include some instructions here for you to make sure that everything's set up and installed properly. But if you are needing to either replace or add a ball mount, this is gonna be a great way to go. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.