Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks
(117 reviews)
Price: $40.08
In Stock
Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks
Item # DTLBM02RK
Our Price: $40.08
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (117)
- Q & A (0)
- Videos (1)
- Photos
Fastway Accessories and Parts - DTLBM02RK
- Trailer Hitch Ball Mount
- Keys
- Fastway
Do-it-yourself lock kit lets you replace up to 2 locking cylinders in your Fastway (Diversi-Tech) ALBM or LBM series self-locking aluminum ball mounts. Both locks are keyed alike to help you cut down on the number of keys you have to carry.
Features:
- Re-keying kit includes everything you need to replace 2 locks on your Fastway or Diversi-Tech aluminum ball mounts, including:
- 2 Lock cylinders
- 4 Tube-style keys
- 2 Set screws
- 2 Dust covers
- 2 Silver warning labels
- 1 Tool for removing and installing set screws
- Both locks are keyed alike
- Tube key lock cylinders provide better security than standard key mechanisms
- Harder to pick
- More difficult to duplicate keys
- Replaces the locks on all Fastway (Diversi-Tech) DTLBM and DTALBM series self-locking aluminum ball mounts
- Made in the USA
43-01-3404 Fastway (Diversi-Tech) Re-Keying Kit for Self-Locking Standard and Adjustable Aluminum Ball Mounts
Replaces DT-LBM02RK
Video of Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Fastway Ball Mounts Re-Keying Kit Review
Today we're going to be taking a look at the Fastway Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts, part number DTLBM02RK. This kit is perfect if you've lost your keys or your locks become damaged. It comes with everything you need to replace two locks. Both locks are keyed alike and four keys are included. Now we'll go ahead and show you how to replace them. First, we want to go ahead and remove our old lock cylinders. What we want to do is peel back the silver warning sticker right here.
There's going to be one on each lock. By peeling back the warning label we've located our set screw. We can go ahead and take our included Allen and take that on out. Now, if you've had your lock for awhile it may be a little corroded, so it's not a bad idea to go ahead and hit that with some penetrating oil and let that sit for a little bit. Let's go ahead and take it out.
Make sure it's all the way in. Now with our set screw removed, our lock cylinder should just come right on out. If you're having trouble getting it out, just go ahead and hit it with some more penetrating oil and give it a second to soak in, and just give it a tug and it should come out. Now, inside you can see our cam actuator. This is what allows our lock to operate our pin. What we'll need to do is, we'll take our new lock cylinder and we'll need to line up this portion here so it fits inside the lock actuator.
We'll also need to be sure that the indentation on top, that's what our set screw is going to go into. We'll also need to grab our new dust cap and that's going to go in the bottom indentation here. We'll put that in slightly, make sure our lock cylinder's lined up, and then we'll push them both in together just like that. Now we can take our included tool and our new set screw, and thread that in. Now, you want to be sure that your lock cylinder is pushed all the way in as far as it will go. We'll just get that started.
You also want to be sure not to over tighten. Just get it nice and snug. All this is meant to do is to hold that lock cylinder in place and prevent it from coming out. Now you want to be sure and try it out and make sure that it works. I'd say it works pretty good. Now that we know everything works, we can go ahead and take our new warning label and apply that on top. Perfect. Good as new. Now we can repeat the same process for our second lock cylinder. That's going to complete our look at the Fastway Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts, part number DTLBM02RK, .
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Manufacturer issue
Customer Reviews
Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks - DTLBM02RK
Average Customer Rating: 4.9 out of 5 stars (117 Customer Reviews)
Do-it-yourself lock kit lets you replace up to 2 locking cylinders in your Fastway (Diversi-Tech) ALBM or LBM series self-locking aluminum ball mounts. Both locks are keyed alike to help you cut down on the number of keys you have to carry.by: Robert 04/26/2024
I purchased a vehicle with Diversi-Tech hitch and the previous owner lost the keys to it. This kit enabled me to over-come that problem, quite easily. The old re-keying kit was easy to remove, using a video that was available on etrailer.com. It only took some WD-40, an allen wrench, and this kit. Love it!
by: Paul 01/29/2024
Instructions were clearly written and the rekeying procedure was straightforward. The replacement parts fit and function perfectly.
by: Joe 11/03/2023
Perfect fit. Thought I was going to have to get a locksmith at 125 an hr. when the old one went bad. Googled it and etrailer.com video came up on how to fix it and the part# to do it with. Ordered the part...three days later (shipped across country) I had it fixed and towing my boat! Great company!!
by: Arturo 05/31/2024
Works perfect. Easy to install. Saved me a lot of money.
by: Frank 04/17/2024
Great service
Thanks!
by: Duane D.03/17/2016
The rekeying kit came as promised with all appropriate items required to rekey my trailer hitch. Etrailer customer service has been excellent, I will gladly recommend this company to anyone that requires their services or products.
I am rekeyed and ready to go!
by: Billy 02/03/2024
Great product and fast delivery
by: Jim 02/04/2024
Was a good fit easy to install
by: Alain 09/07/2022
Great service and prompt response.
by: Kenneth 08/28/2022
worked perfect
Kenneth
8/29/2023
works perfect
by: Tom 11/03/2023
The item showed up on time and fit pretty good, I only had to make minor adjustments.
by: Ron 06/17/2023
Arrived as advertised and the replacement Lockes are an exact fit & function match to the originals.
Very happy with the product and service.
by: Loni11/27/2023
Fast Shipping! Great customer service!
by: Randy M.05/29/2016
Someone tried to remove my hitch, really screwed up one of the key sets. Luckily it was on the ball set so i could remove it from the receiver. Was about to trash it but i emailed etrailer and received a link to the replacement key sets needed for re-keying. Followed the directions and after letting the set screws soak as directed it took about fifteen minutes to replace both key sets. I have made several purchases from etrailer, this is the first time i have had to use customer service. First rate, recommend them to everyone!!
Randy M.
5/29/2017
Product is holding up great, Really great service also!!
by: Benjamin 08/28/2023
Right part on the first try. came exactly as ordered. Worked perfectly.
by: Angelo03/06/2023
Just as advertised and super fast shipping! New locking cylinders work like a charm.
by: Thomas 08/10/2023
Installed as stated. Renewed an older hitch at a reasonable price.
by: Lee 10/08/2022
Excellent! We were really happy with both the kit and the customer service (while we were trying to figure out which kit we needed). Thank you, sincerely. etrailer.com will for sure be our "go to" should we need more trailer parts/solutions in the future.
by: Mike05/19/2015
Worked great... used this as a replacement since I lost the keys to my hitch and it was locked on the truck... was simple to replace!
Mike
5/26/2016
Worked out great thanks!
by: Seth 09/19/2022
This was the second time I ordered the kit. Not sure what I did the first time, but the first kit fell apart the first time I used the hitch. The second time I spent more time cleaning and prepping for the repair. It seems to be much better and has been used several times.
by: John 04/21/2023
Easy installation and good directions.
by: Emmanuel10/03/2018
I’ve had my tow hitch for a little over 6 years and recently tried to remove the hitch and ended up breaking off the key inside the camlock. Luckily I found etrailers which carried replacement locks. After following the instruction included in the package,I removed my old locks and installed the new locks. Great product!!
by: Simon02/14/2018
I needed a special built in lock for a trailer hitch and etrailer had it. I called to confirm the fit and the individual I talked to was very knowledgeable and within a short time I received it. I highly recommend etrailer.
i
by: Jerry 08/07/2023
Super friendly customer service. Fast s hipping.
by: Glen07/10/2019
One set screw and lock came out just fine. The second one was rusted completely and could not remove either the set screw or the old lock. Not really sure how to proceed ???
Mike L.
7/12/2019
Our Fastway representative tells me that they use a little bit of thread locking compound on those set screws, so giving the set screw a good shot of a spray penetrant like PB Blaster and letting that sit for a couple of hours is recommended. If this fails to help you remove the Allen screws, then Fastway recommends using a # 1 extractor to remove the set screw. Once the screw is removed, the lock cylinder should just fall out, if it does not, you can put one of the keys in the lock and pull the cylinder out.
25
117
Show More Reviews
See what our Experts say about this Fastway Accessories and Parts
- Is There a Replacement E-16 Key for Diversi-Tech Ball MountI do have a solution for you but we don't offer this replacement key for your Diversi-Tech Ball Mount. That said, we do have a way for you to get new keys, it just requires new locks as well using the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts part # DTLBM02RK. As the locks get older, the chance for them to seize up is much higher so it might just be a worthwhile upgrade to replace them now anyhow so you don't run into issues later down the road.
view full answer... - Solution for Diversi-Tech Ball Mount with Lost Keys and No Key NumberSince there isn't a way to look at what you have and determine what replacement key you'd need the best option is to re-key the ball mount with the kit part # DTLBM02RK which will give you new cores to install and matching keys.
view full answer... - Replacement Locking Mechanism For The Self-Locking Adjustable 2-Ball Mount Part # DTALBM6407In the last few years, Fastway acquired Diversi-Tech. Therefore, all Diversi-Tech products are now being sold under the Fastway brand. In regards to the Self-Locking, Adjustable 2-Ball Mount w Chrome Balls part # DTALBM6407, I spoke with my contact at Fastway aka "Diversi-Tech" and they informed me that you would need to use air tool oil to help lubricate the locking mechanism on the ball mount. I would not recommend WD-40 as this would cause the existing oil in the mechanism to dry out. If...
view full answer... - Solution for Needing Replacement Keys for Diversi Tech Adjustable Ball MountIf you happen to remember the key number we can help you pick out the correct replacement key. Basically you'd need to search our site for the part number DTKEYRXXXX where the X's equal the key number you have. For example the part # DTKEYR5508 would be correct for the key number 5508. Or if you don't know the key number we can help you with a re-key kit part # DTLBM02RK which will replace the lock cores and gives you a set of keys that match the cores.
view full answer...
- Curt Hitch Receiver Reducer Sleeve for 2 inch Ball Mount Yes, I would be happy to help you. I recommend the Curt Hitch Receiver Reducer Sleeve item # C45405. This will reduce your 2-1/2" hitch receiver down to 2" to allow you to use your current ball mount. This sleeve does not affect your hitch receivers weight capacity. The weight capacity is limited to the rated capacity of your hitch receiver.
view full answer... - Replacement Lock Components for the Flash Self-Locking Aluminum Ball MountThe replacement lock components we have available for the Flash Self-Locking, aluminum ball Mount is the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts # DTLBM02RK. This kit includes: -2 Lock cylinders -4 Tube-style keys -2 Set screws -2 Dust covers -2 Silver warning labels -1 Tool for removing and installing set screws
view full answer... - Replacement Key For Diversi-Tech Locking Hitch I recommend using the Re-Keying Kit for DTLM and DTALBM # DTLBM02RK. This kit will allow you to replace up to 2 locking cylinders on your ALMB or LMB series self-locking ball mounts.
view full answer... - Replacement Key Options for Diversi-Tech Adjustable Ball MountIf you have lost the key for your Diversi-Tech ball mount and are in need of a replacement but don't know the key number you would need I have a solution for you. You can purchase Re-Keying Kit, # DTLBM02RK, to re-key your ball mount. The kit includes a tool to remove the locking cylinder you have in the ball mount now. Or if you know the key number you can order # DTKEYR followed by the part number to get the key you would need. Otherwise I attached a page that has all of the replacement...
view full answer... - Replacement Keys and Lock Cylinders for a Diversi-Tech Ball MountWhat exactly do you have? I couldn't find any replacement keys with a 2071 part number but there might be a way you could replace your current lock cores with ones that would work. If you have a Diversi-Tech Locking Ball Mount then you could use the # DTLBM02RK to replace your current lock cylinders.
view full answer... - Replacing Frozen Diversi Tech or Fastway Locks that are Frozen and Not WorkingI reached out to my contact at Fastway/ Diversi Tech and he said the only replacement key for your current lock cylinder is # DTKEYR5519. If your cylinder is locked up, he suggests using air tool oil or I suggest a penetrating oil. The final option is to replace the locks with the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks # DTLBM02RK.
view full answer... - Re-Keying Kit For Old Diversi-Tech Lock And Ball MountI appears that the Replacement Tube Key for Diversi-Tech Locks and Ball Mounts # DTKEYR3320 (NLA) has been discontinued and is no longer available. Instead, you'll have to re-key your locks with the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts # DTLBM02RK.
view full answer... - Replacement Key 5516 For Adjustable Ball MountWe offer a replacement 5516 key for Diversi-Tech or Fastway aluminum adjustable ball mounts which is part # DTKEYR5516. Assuming the ball mount is from Diversi-Tech or Fastway, you could also re-key it using the # DTLBM02RK kit. That would be the only replacement key we offer with that number for a locking adjustable ball mount. You can see current pricing on the linked product page.
view full answer... - How to Install New Lock Cores In a Diversi-Tech Ball MountTo install the Diversi-Tech Replacement Locking Cylinders, # DTLBM02RK, on a locking Diversi-Tech ball mount, the opening to get to the set screw is located under the warning label that is on the top of the hitch. I called the supplier (Diversi-Tech) and they recommended when installing the replacement locks to first put some air tool oil in the hole where the set screw is located and let set for awhile. This will help break up the threadlock that secures the set screw in the ballmount....
view full answer... - Can Diversi-Tech Ball Mount Be Rekeyed While Still Installed in HitchYes you can install a new lock core in your ball mount with it left in the hitch. The correct kit you need to re-key a Diversi-Tech adjustable ball mount like what you have is the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts # DTLBM02RK. I attached an install video for this kit that shows it being used to install a new lock core setup in a ball mount just like yours with the ball mount being left in the hitch like you asked about too.
view full answer...
- Replacement Key for Fastway Diversi-Tech Ball MountI'm sorry to hear about the break-in but I do think I can help you and thanks for the photo. Though I was unable to reference the number you gave as a part number, from the photo it looks like you have a Diversi-Tech (Fastway) Aluminum Ball Mount. What you will need is the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts # DTLBM02RK to replace the locks.
view full answer...
- Replacement Locking Mechanism For A Diversi-Tech Ball MountI do have an option available for you to consider, however we do not currently carry the replacement key for the R3223 model. If you still wish to use the locking mechanism on your Diversi-Tech ball mount, you will need to use a re-keying kit such as the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts part # DTLBM02RK.
view full answer... - What To Do If Key For Lock Is Missing On Diversi-Tech Ball MountWithout the key or the key number you will need to remove the locks that are on your Diversi-Tech ball mount and replace them with Diversi-Tech 2-Pack Re-Keying Kit, # DTLBM02RK. This kit will have 2 keyed-alike lock cylinders with 4 keys and lock covers. It will also include 2 set screws and an allen wrench. On the Diversi-Tech ball mount there will be a set screw that is located under the warning label on top of the hitch. If you lift up the warning label there will be a hole with a...
view full answer... - Replacement Key For Diversi Tech ProductsIt seems like you have a Diversi Hitch Ball Mount like this # DTALBM6625-2S. We have parts for when you loose your keys. If you know the key number you can just buy the key. If you don't have the key number you can just replace the core and you'll get some keys with that kit. Here is the kit # DTLBM02RK. I've included a video for you to show you how to swap the cores out if you do not have your key number.
view full answer... - How To Removed Fastway Flash Series Ball Mount On Truck When Keys Are LostSince you do not know the key number for your Self-Locking, Adjustable 2-Ball Mount, Stainless Balls - 2.5" Hitch - 6" Drop/7" Rise # DTALBM6625-2S and currently have the hitch installed on your truck, you will need the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks # DTLBM02RK. This will remove the current locks and give you two new locks with four new keys. I included a video of the # DTLBM02RK being installed for you to take a look at.
view full answer... - Solution for Diversi-Tech/Fastway Adjustable Ball Mount that Keeps Breaking KeysIf the ball mount you have is a Diversi-Tech or a Fastway (the new brand name) then what you'll want to do is get the re-key kit part # DTLBM02RK so that you can remove your old lock cores and install new ones that will function properly.
view full answer... - Re-Keying Kit for Diversi-Tech and Fastway Trailer Hitch Ball MountThe Diversi-Tech ball mount you have will require the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks # DTLBM02RK. This will give you everything you need to replace your lock cylinders and keys.
view full answer... - Will Fastway Re-Key Kit Allow Locked Adjustable Ball Mount to Remove from HitchYes, if you bought the Re-Key Kit part # DTLBM02RK you would be able to remove the old lock cores and then turn the lock mechanism with a slot screwdriver so that the ball mount could be removed.
view full answer... - Lost Key for Diversi-Tech / Fastway, Self-Locking HitchI originally thought this "DT" hitch was "Draw-Tite" but I have figured out that this is a "Diversi-Tech" hitch, which was bought out by Fastway some time ago. The key number is NOT on the lock cylinders as many cylinders have. Instead you would have had to save your original paperwork with the key number noted. Since you do not have this number you will need to order Fastway's #DTLBM02RK lock replacement kit which comes with instructions and four keys. Our Fastway representative tells...
view full answer... - Size of Allen Wrench Needed to Replace Lock Cylinder in Diversi-Tech Aluminum Ball MountsAccording to my buddy at Diversi-Tech, the set screw that holds the lock cylinder in uses a .050 inch Allen wrench. Before attempting to remove the screw, I would highly recommend soaking the set screw with some penetrating oil because the set screw will have a bit of thread locker on it. The # DTLBM02RK re-key kit includes the Allen wrench.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Lindsey S
Updated by:
Wilson B
Written by:
Raymond P
Video by:
Dustin K
Video Edited:
Chris R
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Alain
9/8/2023
Works as advertised