Star Pin Locking Fasteners for License Plates and Frames - Stainless Steel - Metric - Qty 4

See what our Experts say about this Cruiser Accessories and Parts

• Starpin Locking Fasteners for License Plates and Frames for a 2012 Honda Civic
  Since you have an import vehicle, 2012 Honda Civic, you will likely need the metric version of the Star Pin Locking Fasteners which is # CR81300.
  view full answer...
• Anti Theft License Plate Fasteners for a 2008 Honda Accord
  According to Cruiser Accessories, the # CR81300 Locking Fastener Kit wold be what you need for your Accord. Honda uses M6 x 20 fasteners, which is what size these are. These also use a special security bolt that wouldn't be easy to remove without the included wrench.
  view full answer...
• Locking License Plate Screw Kit for a Honda Accord
  Since the Star Pin Locking Fasteners # CR81200 comes with new nuts for the screws of the kit to screw into it wouldn't matter if the Honda bolts match up. Or you could go with the part # CR81300 that is designed to work with import vehicles. This also comes with new nuts.
  view full answer...
• Anti-Theft License Plate Screw Kit Recommendation for a 2009 Honda Pilot
  The locking license plate screw kit you would want for your 2006 Honda Pilot would be the Locking Fasteners for License Plates # CR81300. This kit is designed for imported vehicles like your Honda. The Locking Fasteners for License Plates # CR81200 that you referenced is designed for domestic vehicles and would not work for you.
  view full answer...
• Will Anti-Theft License Plate Screws Work on 2018 Subaru Impreza Hatchback?
  The correct Star Pin Locking Fasteners for License Plates and Frames is # CR81300. These fasteners are designed to be used on imported vehicles such as your 2018 Subaru Impreza.
  view full answer...
• Would Star Pin Locking Fasteners for License Plates and Frames # CR81300 Fit 2013 Volkswagen Jetta
  Yes, the Star Pin Locking Fasteners for License Plates and Frames # CR81300 will fit because it is designed to replace the current fasteners you have that are holding the license plate to your 2013 Volkswagen Jetta. Each screw head has a star-shaped keyhole with a pin at the center so the screw can be removed only with the included special key.
  view full answer...
• Is Cruiser Accessories CR76200 Tuf Flat License Plate Shield Compatible with License Plate Frames
  According to Cruiser Accessories, their # CR76200 Tuf Flat license plate shield is designed to work with a license plate frame, so it'll work just fine with your existing frame. If you don't already have mounting screws, you can use the # CR81300 set which includes security bolts that are very difficult to remove unless the included wrench is used.
  view full answer...
• Does Diamondesque License Plate Frame CR18130 Come With One Or Two Frames?
  I believe you are referring to the Diamondesque License Plate Frame - Chrome and Clear # CR18130 that you were looking at. This is sold as a single frame so you would need a quantity of two if you wanted one for the front and the back of your vehicle. I recommend adding anti-theft hardware to deter theft of your license plates and covers. You will want to check your current hardware and match up accordingly with the following options: Star Pin Locking Fasteners (round nuts) # CR81300 or...
  view full answer...
• Which Locking Fasteners For License Plates Will Work For Subaru Crosstrek And Ford Fiesta?
  Technically, the Star Pin Locking Fasteners for License Plates and Frames Standard # CR81200 are made for domestic vehicles like the Ford Fiesta, while Star Pin Locking Fasteners for License Plates and Frames Metric # CR81300 are made for import vehicles, such as your Subaru Crosstrek. The main thing you want to look at is how the nuts are currently held in place on your vehicles. If they have a rectangular nut that is locked into a rectangular shaped housing then you will want to stick...
  view full answer...
• Recommended Bolts for Cruiser Bowtie License Plate Frame
  It sounds like you are looking for bolts for your Bowtie license plate, like the Bowtie Cruiser Frame # CR10437. The bolts # CR81200 are the correct standard bolts and nuts for this type of license plate frame. They are sold in a quantity of 4 but if you need 8 you will just need to change the quantity box on the page to 2. If you instead need metric bolts you will want # CR81300. We also offer the ultimate kit # CR81500 which includes 4 Standard-size bolts, 4 metric-size M6 bolts,...
  view full answer...
• Dimensions of Tuf Combo License Plate Frame CR62052
  I checked with the manufacturer and was able to get the exact dimensions for you of the Tuf Combo License Plate Frame and Smoke-Tinted Shield - Black # CR62052. They say this frame measures 12.3 inches long x 6.2 inches wide (in fractions that'd be just under 12-5/16" and just over 6-3/16"). To mount the # CR62052 you will need one of two kits; for import vehicles the Star Pin Locking Fasteners # CR81300, and for domestic vehicles the Star Pin Locking Fasteners # CR81200.
  view full answer...
• Which Star Pin Locking Fasteners To For License Plate Cover On 2012 GMC Terrain
  To secure the USA Flag License Plate Frame # CR23003 to your 2012 GMC Terrain you would want the Star Pin Locking Fasteners for License Plates and Frames # CR81200 as they are designed for domestic vehicles where the # CR81300 you were looking at are designed for import vehicles using metric threads. The # CR23003 uses 4 screws, so you would only need 1 of the # CR81200 as it includes 4 screws, 4 plastic nuts and the star pin key. I included a video of the # CR81200 for you to take a look at.
  view full answer...

Do you have a question about this Accessories and Part?