Bulldog Winch ATV Winch Mounting Plate for 1-1/4" Hitches - 2,000 to 4,000 lbs

Video Transcript for Review of Bulldog Winch - Electric Winch - BDW20316

Today we're going to take a look at the Bulldog winch ATV winch mounting plate for one and a quarter inch hitches.This is going to have a two thousand to four thousand pound capacity and this is going to be a nice portable way to mount our winch to our vehicle. You'll be able to mount the winch to the pre-drilled holes in our bracket and then the other end will just attach to your one and a quarter inch hitch.It does not come with a hitch pin or clip or lock, so you will have to provide that on your own.It also has two mounting points for any shackles that we might want to use on the front of this. Again, those are also not included.It does have a mounting channel for your fair lead included with most Bulldog winch receivers or you can also find one that's sold separately as well using part number BDW20007.Now the shackles as well as the hitch pin and clip or lock, you can find all of those accessories here at etrailer.com as well.The five eighths inch shackles will be part number BDW2006.As far as our dimensions with this bracket is going to be eleven inches wide and six inches deep. Our mounting holes, the larger ones there going from about the center to the center of each one is going to be about five and three quarters of an inch apart. Give you a little better view there.Each of those mounting holes is going to be about an inch and three eighths long so you should have a good allowance of space there, and then the distance between those front to back, going again center to center, that's going to be about three inches.This is going to step away from our hitch by about three and a half inches, so going from the center of our hitch pin hole to the front of that bracket you'll have about three and a half inches of space.And it does come with a mounting bracket to get your contactor or power source mounted up and the hardware for that as well. It's just going to be a small bracket there with the three bolts, a washer, and nut, and then a spacer for the one on the end.That's going to do it for our look at the Bulldog Winch ATV Winch Mounting Plate for one and a quarter inch hitches with a two thousand to four thousand pound capacity..