2006 Toyota Sienna Vehicle Suspension Installation And Review Videos

Timbren Rear Suspension Enhancement System Installation - 2006 Toyota Sienna- Video

Today, on our 2006 Toyota Sienna, we're going to be installing the Timbren Rear Suspension Enhancement, part number TTORSEN04. All right. Now, let's get some factory measurements here. Let's figure out how our van sits before any load's on it. Here in the rear, it looks like we're going to be at about 29-1/4 inches, and here at the front, we've got about 29-3/4. Now, that we've got a load on our vehicle, you can see we're getting that rear-end sag that's common when you're towing, when you've got your van loaded with your passengers, pets, all the goodies, everything you need for camping, or maybe you got that 4-bike rack hanging off the bike. Whatever the situation is, it draws the rear of the vehicle down. more

7/15/2015 1:22:08 PM

Firestone Coil-Rite Air Helper Springs Installation - 2006 Toyota Sienna- Video

Today on our 2006 Toyota Sienna we'll be installing the Firestone Air Helper Spring Kit Part #F4155. Our first step will be to install the air bag inside the coil spring. To make it more accessible and easier to install the air bag, it may be necessary to remove the lower shock mounts so that the axle can swing down further away from the vehicle. To do this, we'll remove the nut washer on the shock mount and then the fender washer and slide the shock off the lower shock mount. Now we can go ahead and take the weight off of the vehicle. To do this, we'll raise the body allowing the suspension and axle to fall. As you can see the wheel speed sensor wire is starting to become stretched. In order not to harm the wire we'll go ahead and disconnect the wire from the wheel speed sensor. more

9/27/2013 8:14:29 AM