Best 2013 GMC Sierra Vehicle Suspension Options- Video
Hey everybody, Ryan here at etrailer. Today, we're gonna be checking out our best suspension enhancement options for your 2013 GMC Sierra 1500. So today we're gonna be checking out a total of four enhancement options. And don't get me wrong, there's a ton of them available out on the market. But with that said, these are some that we've had a lot of good luck with. We know that they work and it seems like a lot of other people have had really good luck with them as well. more
3/7/2022 2:52:55 PM
SumoSprings Rebel Rear Axle Helper Springs Installation - 2013 GMC Sierra- Video
Ryan: Hey everybody, my name's Ryan and here at Etrailer, we install, test, fit and review a lot of different parts. That way we could try to answer any questions those of you might have. And that's exactly what we're doing here today on our 2013 GMC Sierra 2500. We're going to be taking a look at and showing you how to install the SumoSprings Rebel Custom Helper Springs for the rear axle. So now that we've got the SumoSprings on, let's go ahead and run through our test course again and see how they really perform. So get straightened out here. more
11/20/2020 10:17:51 AM
Firestone Ride-Rite Air Helper Springs Installation - 2013 GMC Sierra- Video
Today in our 2013 GMC Sierra, well be installing the Firestone Ride-Rite Air Helper Springs, part number F2528. First, were going to go ahead and add approximately 2,000 pounds weight to the manufacturer suspension setup. Then well go ahead and go through our test scores. Now, with the Firestone Ride-Rite Air Helper Springs installed and aired up, well go ahead and put in our 2,000 pounds, run it back through our test course. Now, well go ahead and begin our install. First up of our install is removing the old or manufacturers jounce bumpers. To get the jounce bumper out of the cup, well simply use a flat blade screwdriver and slide it in between the jounce bumper and cup and pry it out of its position. Well set the jounce bumper aside and will not reinstalled. Keep in mind, each process we do here on the driver side, were going to repeat identically on the passenger side with one exception well be adding a heat shield on the passenger side to prevent excessive heat from exhaust getting to the airbag. Now, were ready to go ahead and start assembling the airbag. more
12/9/2013 2:07:43 PM
Air Lift LoadLifter Air Helper Springs Installation - 2013 GMC Sierra- Video
Today on our 2013 GMC Sierra, well be installing the Air Lift Vehicle Suspension System, part number AL57338. This will be the rear airbag setup for our vehicle. To begin our install, well first need to remove a few of the manufacturers components, starting with the jounce bumper. To remove the jounce bumper, well just take a flat blade screwdriver, get in between the jounce bumper cup and the jounce bumper itself, and pry it out of the cup. Next, on both sides, well remove the bolt that secures the rear brake line to the back of the jounce bump stop. Also here on the drivers side, well need to remove the bolt and bracket that secures the parking brake cable. Well remove the bolt from the frame and then remove the bracket off the cable, and we will relocate it once we complete installing the airbag. more
9/30/2013 6:14:27 AM
