bing tracking image

2010 Ford F-250 and F-350 Super Duty Vehicle Suspension Installation And Review Videos

     

Best 2010 Ford F-250 and F-350 Super Duty Suspension Enhancement Options- Video

Best 2010 Ford F-250 and F-350 Super Duty Suspension Enhancement Options

Speaker 1: Today we're going to be taking a look at the best suspension enhancements for your 2010 Ford F-150, F-250, and F-350. Here we're going to have a leaf spring-style helper spring, followed by our air bag helper springs. Then over here we're going to have a jounce-style helper spring. This is going to be our lower overload helper spring. Then finally on the end, this is going to be our upper overload helper springs.Now each one of our types of suspension enhancements are going to do the same thing. When we're carrying a heavy load or hauling a heavy trailer, they're going to prevent the back end of our truck from sagging, causing more strain on our suspension, as well as lifting up the front end, creating less contact for our tires and not a safe driving condition. more


Watch Video

7/26/2017 10:26:34 AM



SuperSprings Vehicle Suspension Installation - 2010 Ford F-350- Video

SuperSprings Vehicle Suspension Installation - 2010 Ford F-350

Today on this 2010 Ford F-350 Super Duty, we are going to install part number SSA10 from SuperSprings. The first thing you want to do is go ahead and get the vehicle up in the air a little bit. You do not have to take off the wheel, but it makes things a lot easier to fit inside there. So, we have our wheel off. We have the suspension unloaded. And basically what is going to happen is we are going to set a block that goes on top of the factory overload spring right here. Alright, the first thing we want to do is go ahead and install this block that fits right here. Now this will fit a couple of different vehicles. You will need to flip it around and find out which is the best fit. Once you have that just like that, you can take the SuperSpring and lay it on top. And you will have to maneuver it around some cables, especially the parking brake cables, and make sure you do not hit anything else in the way. We also took off the bolts that go through the bottom, just to make it easier to thread everything inside because the unit does come preassembled. 1:07 more


Watch Video

1/28/2011 11:27:10 AM



  1