2003 Dodge Ram Pickup Vehicle Suspension Installation And Review Videos

Best 2003 Dodge Ram Pickup Suspension Enhancement Options- Video

Speaker 1: Today we're gonna be taking a look at the best vehicle suspension enhancements for your 2003 Dodge Ram Pickup. So here we're gonna have four different representatives of the different styles of suspension enhancements that are available for our pickup. Over here, we're gonna have the John 00:00:12 style spring style, right here we have the air spring style. And then our overload pads, and then finally our leaf spring style. Each one of these is gonna help out with the sag in the backend and help support that heavy load, but each one of them is gonna work a little bit different, so let's go and take a look at some of the differences.Our John spring style's helper springs are gonna work, and they're gonna replace our factory John stop. And what they're gonna do is, is they're gonna provide that extra support, by giving us this little bit larger space than normal. more

7/27/2018 10:52:11 AM

Firestone Ride-Rite Air Helper Springs Installation - 2003 Dodge Ram Pickup- Video

Today on our 2003 Dodge Ram Pick Up, we will be installing the Firestone Ride Rite Air Helper Springs, Part Number F2299. These springs have a load leveling capacity of 3,200 pounds, at most up to 5,000 pounds. It can be adjusted in increments of 5 psi to 100 psi and has a limited lifetime warranty on the air springs, with a 2 year warranty on the hardware. First let's go ahead and take a look at our vehicles ride height before we add any weight. This will be the drive, ride height with the standard or stock suspension. We're riding at approximately 41 and a half inches. Next we'll go ahead and add approximately 2,250 pounds. more

1/16/2015 2:40:39 PM

Timbren Rear Suspension System Installation - 2003 Dodge Ram- Video

Today on our 2003 Dodge Ram 2500 we'll be installing Timbren Suspension Enhancement System, part number TDR2500CA. Now this will be for the rear. Now before installing the Timbrens you may need to raise the vehicle to allow the axle to hang freely. We'll need to remove the existing bump stops. We'll take out the two bolts holding it in place. Now we'll need to keep the bolts as we will reuse them when installing our Timbren Suspension. more

6/18/2012 11:09:15 AM

Timbren Front Suspension System Installation - 2003 Dodge Ram- Video

Today on our 2003 Dodge Ram 2500 we'll be installing the Timbren Suspension Enhancement System, part number TDF25004B on the front axle. Now to begin our installation we'll need to raise the vehicle to allow the axle to hang freely. We'll remove the existing bump stops by prying it out of the bump stop cup. We can then position the Timbren Spring Assembly into the bump stop cup and press it into place. You may need to use a soapy water as a lubricant to get it up into the cup. With your spring assembly loosely fit into the cup we can then use a piece of wood such as a 2x4 to place between the spring and the axle itself. more

6/18/2012 11:09:03 AM