Putco PURE Halogen Headlight Bulbs Installation - 2012 Honda Odyssey- Video
Today on our 2012 Honda Odyssey I will be installing the Putco PURE high performance halogen headlight bulbs. Part number P239005SW. The Putco lights come in a quantity of two, with a bulk type of 9005, and wattage of 65 watts to 12 volts with a color temperature of 3800 Kelvin. These also meet the Department of Transportation specifications. We're going to show you how to install this on our low beam side, since our high beam side is hard to get to and hard to see with our camera. We'll start by removing our bulb, we can take it out and set it to the side. Here we've got our low beam, again for demonstration purposes, you want to make sure that you don't touch the glass whenever you're installing this. We're going to take our bulb and start by inserting it in and lining up our cabs. more
4/20/2016 3:46:14 PM
Putco PURE H11 Halogen Bulbs Installation - 2012 Honda Odyssey- Video
Today on our 2012 Honda Odyssey, we'll be showing you how to install the Putco Pure high performance halogen bulbs, part number P230011SW. The Putco lights come in a quantity of two with bulb type H11 with a wattage of 55 watts at 12 bolts and a color temperature of 3800 Kelvin. These lights also meet the Department of Transportation specifications. Now we're going to show you how to install this on our low beam side since our high beam side is hard to get to hard to see with our camera. We'll start by removing our bowl. We can take it out and set it off to the side. more
4/20/2016 3:46:06 PM
Putco PURE Premium Bulb Installation - 2012 Honda Odyssey- Video
Today on our 2012 Honda Odyssey, we will be installing the Putco Pure Premium 7443 LED bulbs with 360 degree illumination, Part No. P237443W360. All right, the first thing we'll do is open the rear hatch door of our Honda. We will remove the two screws which secure the taillight to the van. After we have removed the screws, we go ahead and just slide the taillight out. Please take note of the two alignment pins that will help reinstall the taillight later on. Now to completely remove the taillight, all we have to do is twist the two sockets, removing the bulbs from the taillight. With the bulbs exposed, we are going to remove the old taillight bulb and get ready to install the new LED one. Now it's not necessary but it is recommended before installing the new bulb, to go ahead and add a little dielectric grease. more
6/4/2014 9:38:47 AM
Filter Videos
Filter Videos
