bing tracking image

2013 Ford Explorer Trunk Bike Racks Installation And Review Videos

     

Hollywood Racks Expedition Trunk Bike Rack Review - 2013 Ford Explorer- Video

Hollywood Racks Expedition Trunk Bike Rack Review - 2013 Ford Explorer

Today on our 2013 Ford Explorer, well be test-fitting the Hollywood Rack Expedition, trunk mounted two-bike rack, part number hrf6-2. Well begin our test fit by placing the bike rack up unto the vehicles rear hatch. Well position the bottom side of the bike rack on the upper tier of the rear bumper. With the new top set of levers to adjust the bike rack to fit around the rear hatch.Now, the top portion of the bike rack should rest at about the middle of the rear window. Once weve established this position we can then clamp down the black plastic levers. Well then hook the top clips to the top part of the rear hatch, the side clips to the side part of the rear hatch, and the bottom clips at the bottom part of the rear hatch. more


Watch Video

11/5/2013 10:00:22 AM



Hollywood Racks Gordo 2 Bike Carrier Review - 2013 Ford Explorer- Video

Hollywood Racks Gordo 2 Bike Carrier Review - 2013 Ford Explorer

Today on our 2013 Ford Explorer we'll be test fitting the Holllywood Racks Gordo trunk my-nah 00:05 2-bike rack for long wheel based bicycles, part number HRG2. We'll begin our test fit by placing the bike rack up onto the vehicle's rear hatch. The bottom portion of the bike rack should rest on the upper tier of the rear hatch, just below the license plate. The top portion should rest about the center of the rear window. Keep in mind when you using this bike rack you will not be able to use the rear windshield wiper. We'll now take the top clips to put it the top part of the rear hatch, and the bottom clips to the bottom of the rear hatch, as well as the side clips to the side part of the rear hatch. more


Watch Video

11/5/2013 10:00:22 AM



Hollywood Racks Over-the-Top Bike Rack Review - 2013 Ford Explorer- Video

Hollywood Racks Over-the-Top Bike Rack Review - 2013 Ford Explorer

Today on our 2013 Ford Explorer, well be test-fitting the Hollywood Over the Top, trunk mounted two-bike rack, for vehicle as spoilers, par number hrf2. Well begin our test fit by placing the bike rack up unto the vehicles rear hatch. Well position the bottom part of the bike rack on the upper tier of the rear bumper, as well as the top portion of the bike rack to the upper part of the window, just below the rear light. We can do this by flipping out the middle set of two black levers. With the bike rack in position, well take the top clips, and hook it to the top part of the rear hatch, as well as the side clips to the side part of the rear hatch, and the bottom clips at the bottom part of the rear hatch. Well then tighten on the straps to secure the bike rack to the vehicle.Well now go ahead and secure the extra strap. more


Watch Video

11/5/2013 10:00:22 AM



Thule Archway Trunk Mount Bike Rack Review - 2013 Ford Explorer- Video

Thule Archway Trunk Mount Bike Rack Review - 2013 Ford Explorer

Today on our 2013 For Explorer, we'll be test fitting the Thule Archway Trunk Mounted 2 Bike Rack part number TH9009XT. Keep in mind, when using this bike rack, the rear windshield wiper may not be used. With our fit dial to fit number nine, we'll place the bike rack up onto the rear hatch of our vehicle. With the bike rack in position, we can take the top clips and put it to the top part of the rear hatch, as well as the side clips to the side part of the rear hatch, and the bottom clips to the bottom part of the rear hatch. We can now tighten down the straps and secure the bike rack to the vehicle. We'll now use the included hook-and-loop fasteners to secure the excess lock. With everything all tightened down and secure, we're ready to load up our bike. more


Watch Video

11/5/2013 10:00:22 AM



Thule Gateway Trunk Mount Bike Rack Review - 2013 Ford Explorer- Video

Thule Gateway Trunk Mount Bike Rack Review - 2013 Ford Explorer

Today on our 2013 Ford Explorer, well be test fitting the Thule Gateway trunk binder two-bike rack, part number TH9006XT. With the fit dial set to number nine, according to the included instructions, place the bike rack up onto the vehicles rear hatch. Position the bottom part of the bike rack onto the upper tier of the rear bumper. The top portion of the bike rack should be around the center of the rear window. Keep in mind the rear windshield wiper may not be used while using this bike rack. Well take the top clips and hook it on the top portion of the rear hatch. more


Watch Video

11/5/2013 10:00:22 AM



Thule Passage Trunk Mounted Bike Rack Review - 2013 Ford Explorer- Video

Thule Passage Trunk Mounted Bike Rack Review - 2013 Ford Explorer

Today, on our 2013 Ford Explorer, we'll be test fitting the Thule Passage Trunk Mounted 2 Bike Rack part number TH910XT. With the fit dial set to number nine according the included instructions, we'll begin our test fit by placing the bike rack up on to the vehicle's rear hatch. We'll then place the top clips to the top part of the rear hatch, the side clips to the side part of the rear hatch, and the bottom clips to the bottom part of the rear hatch. We can then tighten down the blue straps to secure the bike rack to the vehicle. After securing the excess slack, we're ready to load up a bike. We'll undo the cradle straps, place our bike into the frame cradles, and then secure it with the straps. more


Watch Video

11/5/2013 10:00:22 AM



Yakima QuickBack 2 Bike Rack Review - 2013 Ford Explorer- Video

Yakima QuickBack 2 Bike Rack Review - 2013 Ford Explorer

Today, on our 2013 Ford Explorer, we'll be test fitting the Yakima QuickBack Trunk Mounted 2 Bike Rack part number Y02621. Keep in mind when using this bike rack the rear windshield wiper cannot be used. We'll begin our test fit by placing the bike rack up onto the vehicle's rear hatch. We'll place the top clips to the top part of the rear hatch, the side clips to the side part of the rear hatch, and the bottom clips to the bottom part of the rear hatch. We then can tighten down the straps to secure the bike rack to the vehicle. After securing the excess slack, we're ready to load up a bike. more


Watch Video

11/5/2013 10:00:22 AM



  1