bing tracking image

2012 Chevrolet Silverado Truck Tool Box Installation And Review Videos

     

UWS Toolbox Review - 2012 Chevrolet Silverado- Video

UWS Toolbox Review - 2012 Chevrolet Silverado

more


Watch Video

12/20/2012 2:52:33 PM



UWS 75-Gallon Transfer Tank and Chest Review - 2012 Chevrolet Silverado- Video

UWS 75-Gallon Transfer Tank and Chest Review - 2012 Chevrolet Silverado

Today on this 2012 Chevrolet Silverado were going to do a test fit of part number UWS06022 from UWS. This is UWSs 75 gallon L-shaped transfer tank with chest. Towards the cab of the truck is the transfer tank, and this is the lid for it. On the tank side, the height above the rails on the bed is going to be five and three quarter inches, including the cap. The back half of the tank is the chest, and it has two handles to open it up here. Our clearance between the bedrails is going to be about eight in the, and there is also three tabs to help hold it assembled in place. more


Watch Video

12/19/2012 12:50:26 PM



UWS 45-Gallon Transfer Tank and Chest Review - 2012 Chevrolet Silverado- Video

UWS 45-Gallon Transfer Tank and Chest Review - 2012 Chevrolet Silverado

Today on this 2012 Chevrolet Silverado were going to do a test fit of part number UWS06019. This is their 45 gallon L-shaped transfer tank with a chest. Well start off our test fit by basically just putting it into the bed of a truck and centering it up in the middle. When we put it in place well make sure that the tank is firmly against the front of the bed. You can see how the tank has tabs on the side to help secure it to the bed. Theres also one at the bottom. more


Watch Video

12/19/2012 12:50:24 PM



UWS Crossover Toolbox Review - 2012 Chevrolet Silverado- Video

UWS Crossover Toolbox Review - 2012 Chevrolet Silverado

Today on this 2012 Chevrolet Silverado, were going to do a test fit of part number UWS00156 from UWS. This is a truck bed toolbox, narrow crossover style. The dimensions of the box are 69 inches long by 12 inches wide and nine and a quarter inches deep, and above the bedrails is about two inches in height. Well start off our test fit by putting it into the bed, and well scoot it up as close as we can to the edge of the bed, and then well open up our lid to check for clearance. Now, it looks like with the box pushed already up against the bed, we have plenty of clearance for the cab. That measurement will be two and three quarter inches. more


Watch Video

12/19/2012 12:50:21 PM



  1