2015 Ford F-150 Truck Bed Mats Installation And Review Videos
Westin Custom Fit Truck Bed Mat Review - 2015 Ford F-150- Video
Speaker 1: Today on our 2015 Ford F150 Super Crew Cab, we're going to be doing a test fit on the Westin Custom Fit Truck Bed Mat, part number 50-6355. As you can see it's custom fit to your F150, now this is going to work with your regular cab, super cab, and super crew cab just as long as you have a five and a half foot bed. As you can see here it's notched out around our tail gate end, around our wheel wells, up to the front to the cab and back again. It's a heat molded 100% recycled 5/16 inch thick rubber. Not only is it going to protect the floor board of your truck bed but, the ribbed surface is going to prevent your cargo from shifting. Here, underneath, the molded pattern is going to prevent the mat from shifting in your truck bed.To begin our test fit, I've gone ahead and unrolled my mat, you want to determine which way is the cab end and which way is the tail gate end. more
Watch Video
5/23/2018 2:27:11 PM
BedRug Custom Full Truck Bed Liner Review - 2015 Ford F-150- Video
Speaker 1: Today in our 2015 Ford F150 Supercrew cab, we're gonna be doing a test. Fitting on the bedrug custom full truck bedliner. Part number BRQ15SCK.Here's what it looks like with your bedrug in place. As you can see, it offers complete coverage of your truck bed. Here you can see it covers the full side, along with the wheel well. Goes around, covers the cab end, and onto the other side. more
Watch Video
5/17/2018 11:22:09 PM
Bedrug BedTred Full Truck Bed Liner Installation - 2015 Ford F-150- Video
Today on our 2015 Ford F-150, we're going to take a look at and show you haw to install the BedTred Custom Full Truck Bed Liner. This is for trucks with the bare or spray-in bed liners, part numbers BR1512160. To begin our installation, we need to remove any of the cargo management stuff from inside of the truck and, in this case also, the lights that are here. We're going to pop those out. For those, we'll just use a flat-plate screwdriver straight up on the bottom. There'll be a tab in there. Once that bottom's out, the top will just slide down. more
Watch Video
3/7/2016 1:16:58 PM
1
