2013 Chevrolet Silverado Trailer Wiring Installation And Review Videos

Hopkins Trailer Wiring Connector Installation - 2013 Chevrolet Silverado- Video

Today on our 2013 Chevrolet Silverado, we're going to be showing you how to install the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-way Flat Trailer Connector. This is for the vehicle end. Part number is HM40920. A few of the great things about the Endurance line from Hopkins, especially with this plug: our door, you can see we've got dual tabs, but this is going to open past the 180 degrees. This is going to allow us plenty of access to get in there and get our plug plugged in. We can see that line right around there. more

5/13/2016 3:06:29 PM

Trailer Wiring Harness Installation - 2013 Chevrolet Silverado HM48420- Video

Today in our 2013 Chevy Silverado, well be installing the Hopkins Endurance 6-Pole Trailer Connector Socket part number HM48420. This will be in conjunction with the Pollak 5th Wheel and Goose Neck Trailer Connector Wiring Harness part number PK11932. To begin our install, well take our Hopkins 6-Pole and make sure we have a hole saw large enough so that the 6-Pole can be mounted in our bedside. Were going to mount it about right here, so well go ahead and take our hole saw and drill a hole in the bed liner and side. Now we can take our wiring harness and feed it from underneath up and out the free drilled hole. Once we feed it through, well go ahead and pull it out so we can work with the end. Typically we would install a seven blade end that would connect to this wiring harness, but because we need a 6-pole trailer connector to connect to our trailer end, were going to go ahead and remove each one of these connectors. more

8/5/2014 11:04:11 AM