Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2015 Volkswagen Jetta - Curt- Video
Today, on our 2015 Volkswagen Jetta, we're going to review an install, the Curt Class I, 1-1/4-inch receiver tube hitch, part number C11072. Now, here's what the hitch is going to look like once installed. The entire hitch has a nice flat powder-coated finish, so it blends in nicely with the underbody of our vehicle. It's got the stylish round cross tube that connects both of our side brackets, and in the middle here, we have our receiver tube and chain hold downs. The chain hold downs are one on each side and then a 1/2-inch pin hole that goes all the way through our receiver tube. This is the class I, 1-1/4 inch by 1-1/4-inch receiver tube with a 200-pound tongue weight and a 2000-pound tow capacity. Next, we're going to give you a couple measurements. This will assist you with selecting accessories such as a bike rack or a cargo carrier. more
7/16/2015 4:11:37 PM
Trailer Hitch Installation - 2015 Volkswagen Jetta - Draw-Tite- Video
Today on our 2015 Volkswagen Jetta, we're going to review and install the Draw-Tite Sportframe Class I one and a quarter inch Receiver Tube Hitch, part number 24926. Now here's what our hitch is going to look like once installed. We've got a nice stylish round cross tube going into our Class I one and a quarter inch by one and a quarter inch receiver tube. On the other side we'll have our chain hold downs that are easy to access and get to, and a half inch pin hole that goes all the way through for our pin or anti-rattle bolt. The hitch itself is capable of up to two hundred pounds of towing weight and a two thousand pound tow capacity. Next we'll give you a couple of measurements. This will assist you selecting accessories, such as a bike rack and a cargo carrier. more
7/16/2015 4:09:40 PM
Trailer Hitch Installation - 2015 Volkswagen Jetta - Curt C11410- Video
Today on our 2015 Volkswagen Jetta we're going to review and install the CURT Class 1 1-1/4" Receiver Tube Hitch, Part Number C11410. Here's what our hitch is going to look like once installed. As you can see it's a really nice well-built hitch. It's a full steel welded construction with a really nice black powder coated finish. Here on either side we have our chain holddown, and going through our 1-1/4" by 1-1/4" receiver tube is a predrill 1/2" hole. This hitch is capable of up to 200 pounds of tongue weight and a 2,000 pound tow capacity. Next I'm going to give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of hitch pin hole to the outermost edge of the bumper is 5". more
6/8/2015 2:11:06 PM
