2010 Toyota Tundra Trailer Hitch Installation And Review Videos

Trailer Hitch Installation - 2010 Toyota Tundra- Video

Today on this 2010 Toyota Tundra pickup truck, we are going to install part number 41935 from Draw-Tite. Alright, the hitch is going to mount up in the same exact place where the angle iron bracket is. So that is going to have to be removed and the hitch is going up in the same place as the existing fasteners that are already there. Further forward on the vehicle frame, these two holes that are already threaded in the frame, the hitch will use those to mount up to also. It is identical on both side. Right now we are looking at the passenger side of the vehicle. Alright, with the two bolt holes on the side of the frame it is a good idea to go ahead and spray them down a couple of times with WD-40, just to clean out some of the grit in there. Even though this is a brand new vehicle, there is sand there on the other side. So, do not ask me how it got there but there was. We will just clean them out and run a bolt in to make sure everything starts OK. On older vehicles, you will probably have to clean these out a little bit more for anything that has possibly happened in later years. We just want to make sure that the threads are good before we let the bolts in with the hitch. 1:17 more

12/22/2009 1:56:16 PM