etrailer Trailer Hitch Installation - 2014 Toyota Highlander- Video
Rob: Hey, everybody. Rob, here at etrailer.com. And today we're going to be taking a look at the etrailer Class III Custom Fit Trailer Hitch Receiver on our 2014 Toyota Highlander. Now, if you stick around to the end of the video, we are going to show you how to get it installed but we know that everybody wants to know what it's going to look like and go over some of the features first. So here's what our hitch is going to look like once we have it installed. The cross tube is going to sit right below the bumper but the one thing I really like about the etrailer hitches is that it has that carbide almost a flat black finish to it. more
7/15/2020 2:38:53 PM
Curt Trailer Hitch Installation - 2014 Toyota Highlander- Video
Rob: Hey everybody. Rob here at etrailer.com, and today we're going to be taking a look at the Curt Class III Custom-Fit Trailer Hitch Receiver on our 2014 Toyota Highlander. Now, I really like the way this hitch looks mainly because the cross tube is completely hidden behind the bumper. So the only thing we're really going to be seeing is the receiver tube sticking out.Now, I don't know about you, but I really don't want a big bar hanging down below my Highlander, taking you away and distracting from the looks. So I just think it has this really clean, almost factory appearance to it. Now it is a Class III Hitch, which means it's going to give us that two-inch by two-inch receiver tube opening and have the widest variety when it comes to accessories that we can mount. more
7/15/2020 2:38:12 PM
Best 2014 Toyota Highlander Trailer Hitch Options- Video
Speaker 1: Today we're going to be taking a look at the best hitch options for your 2014 Toyota Highlander. Here on top we're going to have etrailer's hitch, part number E98844. Here we're going to have a Draw-Tite, part number 75896. This one here, we're going to have another Draw-Tite, part number 76156. Here on the bottom we're going to have the CURT, part number 13200.One of the noticeable differences between these four hitches is this Draw-Tite here is going to have more of a square or rectangle-style crosstube, where our other three are going to have a round tube. Now this could make a difference on how it looks on the back of the vehicle.Now as far as our safety chain hookups, our etrailer hitch, our top Draw-Tite, and the lower CURT are going to have plate-style safety chain hookups. more
10/10/2018 9:52:12 AM
Trailer Hitch Installation - 2014 Toyota Highlander - Curt- Video
Today on our 2014 Toyota Highlander, we'll be installing the Curt Class 3 2 inch trailer hitch receiver, part number C13200. You can see we have a nice, factory-like appearance where it tucks up nicely underneath the bumper cover. You don't have very much hanging down at all. The back of the 2 inch receiver almost fits flush with the rear bumper, so when you are walking behind the back of the vehicle to load cargo into the hatch, you don't have to worry about knocking your knee or your shin into it and suffering the pain of that. We have a nice plate here, bolted underneath our receiver and the frame of our hitch, so we can hook our safety chains up to. Nice large openings there too, so we will be able to get large diameter hooks through there to secure our trailer safety chains. We have a high gloss black powder coated finish here. more
5/18/2016 11:36:47 AM
Trailer Hitch Installation - 2014 Toyota Highlander - Draw-Tite- Video
Today on our 2014 Toyota Highlander well be installing the Draw-Tite Max-E loader trailer hitch with a 2 inch receiver part number 75896. With our Draw-Tite receiver hitch installed on the back of our Toyota Highlander you can see we have this nice round tubular frame that sits right underneath the back bumper. It doesn't stick out very far. You dont have a lot hanging down, and it gives you a nice clean factory like appearance. We have our standard 2 by 2 opening here to insert your ball mount, bike carrier, or your cargo carrier, or what other hitch mounted accessory you may have. We also have this nice angular plate here, welded to the bottom of our hitch, to hook on our safety chains from our trailer. Unlike a lot of receivers, this has a fairly large opening here. If you had a large hook, like those to your sinker chain, youll be able to hook it up nice and easily. more
5/18/2016 11:36:25 AM
