Trailer Hitch Installation - 2000 Subaru Outback Wagon - Curt- Video
Today in our 2000 Subaru Outback Wagon, we will be installing the current hitch, part number C12270. Here's what our hitch looks like installed on our vehicle. Now we will go ahead and give you a couple of measurements in helping you to choose some accessories for your hitch; such as ball mount, a bicycle rack, or cargo carrier. From the center of the hitch pin whole to outer most edge of the bumper, is approximately 5-3/4". From the top of the opening in the receiver to the ground, is approximately 14-3/4". Now let's go ahead and install our hitch. Now we're going to need to go ahead and lower this carbon canister down here on the passenger side. more
8/15/2014 4:28:35 PM
Trailer Hitch Installation - 2000 Subaru Outback Wagon - Hidden Hitch- Video
Today on our 2000 Subaru Outback Wagon, we'll be installing the hidden hitch, Part #90176. Here's what the hitch looks like installed on our vehicle. Now we'll go ahead and give you a couple of measurements in helping you choose some accessories, such as a ball mount, a bicycle rack, or a cargo carrier. From the center of the hitch-pin hole to the outermost edge of the bumper is approximately 6". From the top of the opening in the receiver to the ground is approximately 14". Now let's go ahead and install our hitch. We're going to need to go ahead and lower this carbon canister down here on the passenger side. To do this, there are three nuts that will need to be removed to get the main body of the carbon canister out of the way, two at the rear of the vehicle and one in the center on the front of the canister. With this lowered out of the way, we'll need to remove two more bolts that hold the bracket to the frame of the vehicle. more
8/15/2014 4:27:28 PM
Trailer Hitch Installation - 2000 Subaru Outback Wagon - Draw-Tite- Video
Today on our 2000 Subaru Outback Wagon, we'll be installing the Draw-Tite Hitch, part number 36284. Here's what the hitch looks like installed on our vehicle. Now we'll go ahead and give you a couple of measurements in helping you choose some accessories such as a ball mount, bicycle rack or a cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper is approximately 6 inches. From the top of the opening in the receiver to the ground is approximately 14 inches. Now let's go ahead and install our hitch. Now we're going to need to go ahead and lower this carbon canister down here on the passenger side. To do this there are three nuts that will need to be removed to get the main body of the carbon canister out of the way. more
8/15/2014 4:26:26 PM
