bing tracking image

2012 Subaru Forester Trailer Hitch Installation And Review Videos

     

Trailer Hitch Installation - 2012 Subaru Forester - Curt- Video

Trailer Hitch Installation - 2012 Subaru Forester - Curt

Today on our 2012 Subaru Forester, we're going to review an install, the CURT class 3 two inch receiver tube hitch, part number 13147. Here's what our hitch is going to look like once it's installed. As you can see, we've got the nice, stylish, round cross tube design. It's a fully welded construction, with a really nice black powder coated finish to prevent rust and corrosion. On the other side of our receiver tube is our chain hold down, and then pre drilled all the way through the receiver tube is our 5/8ths pin hole. This is a class three 2 inch by 2 inch receiver tube, and is capable of up to 400 pounds of tongue weight with a 4,000 pound tow capacity. Next, I'll give you a couple measurements to assist you with selecting accessories for your new hitch. more


Watch Video

6/3/2015 12:02:43 PM



Trailer Hitch Installation - 2012 Subaru Forester - Curt C12047- Video

Trailer Hitch Installation - 2012 Subaru Forester - Curt C12047

Today on our 2012 Subaru Forester, we're going to review and install the Curt Class 2 1-1/4 inch Receiver Tube Hitch, Part #C12047. Here's what it's going to look like once installed. As you can see, we've got the nice, stylish round cross tube design, the fully welded construction, and the nice black powder-coated finish. On each side of our receiver tube is our chain hold down, and pre-drilled is our 1/2 inch pinhole that goes all the way through the receiver tube. This is our Class 2 1-1/4 inch by 1-1/4 inch receiver tube and it's capable of up to 350 pounds of ton weight and 3,500 pound tow capacity. Next we'll give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 4-1/4 inches. more


Watch Video

6/1/2015 9:31:06 AM



  1