Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2010 Subaru Forester - Curt- Video
Today on our 2010 Subaru Forester, we'll e installing the CURT Hitch, part number C12047. This is what our hitch will look like once installed. Next we'll go ahead and give you a couple measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 4 inches. From the top of the receiver tube opening to the ground is 14-3/4 inches. This will assist you in selecting accessories such as a ball mount, bike rack or cargo carrier. Now we'll go ahead with the installation. Before we begin removing the rubber isolators from metal hangers, we'll go ahead and take a safety strap and put it under the exhaust so that it'll help control the weight and we can safely lower it. We'll first go ahead and locate the exhaust hangers. There are a total of five hangers, two for each muffler, one on the inside and outside of the muffler and then one just forward of the rear axle. more
10/20/2014 11:23:05 AM
Trailer Hitch Installation - 2010 Subaru Forester - Curt 13147- Video
Today on our 2010 Subaru Forester, we'll be installing the Curt 2 Inch Receiver Tube Hitch, part number 13147. Next we'll go ahead and give you some hitch measurements that will assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 4-3/8". From the top of the receiver tube opening to the ground is 14-3/4". This will assist you with selecting accessories such as a ball mount bike rack, or cargo carrier. Now we'll go ahead with the installation. Before we begin, removing the rubber inaudible 00:00:33 from metal hangers, we'll go ahead and take a safety strap and put it under the exhaust so that it'll help control the weight and we can safely lower it. We'll first go ahead and locate the exhaust hangers. more
10/20/2014 11:21:12 AM
Trailer Hitch Installation - 2010 Subaru Forester - Hidden Hitch- Video
7/31/2012 9:54:01 AM
Trailer Hitch Installation - 2010 Subaru Forester - Draw-Tite- Video
Today on our 2010 Subaru Forester, we'll be installing Draw-Tite Hitch, part number 75650. This is what our hitch will once it's installed on the vehicle. Next, we'll go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch. From the center of the hitch, pinhole to the outermost edge of the bumper is 6-1/2 inches. From the top of the receiver, tube to the ground is 13-3/4 inches. This will assist you in selecting accessories such as a drawbar, a bike rack, or a cargo carrier. more
7/31/2012 9:52:35 AM
Trailer Hitch Installation - 2010 Subaru Forester- Video
Today on this 2010 Subaru Forester we are going to be installing Draw-Tite hitch part number 24807. This installation will also apply for Hidden Hitch part number 60893. We are underneath the vehicle and the first thing we need to do before we can get started installing the trailer hitch is to lower the exhaust off both the driver and passenger side frame rails. There are two exhaust hangers per side that we need to lower the exhaust off of. There is one here at the more rear side of the vehicle towards the inboard side and then one on the outboard side a little bit forward of the exhaust. Then there is a fifth hanger we need to lower it off of as well and it is forward on the vehicle almost even with the rear axle. 00:34 more
6/4/2010 10:26:27 AM
