Summer Starts Here - Save up to 70%
Best 2009 Nissan Xterra Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2009 Nissan Xterra. The hitches we'll be looking at are the CURT class three hitch, part number 13514, and the Draw-Tite class three hitch, part number 75291. The first major difference that we're going to see between these two hitches are when the CURT's on there, it's a little bit more aesthetically pleasing than the Draw-Tite. Just with the way that this reinforcement collar is made and the plate that's along the top just helps give it a little bit cleaner look. Another major difference that you're going to see between these two is the safety chain connection points. Down here on the Draw-Tite we've got the plate-style with the oval holes cut in them. Those give us pretty good access for a lot of safety chain connections, but up here on the CURT we've got the rolled steel safety chain connections. more
8/30/2016 2:22:29 PM
Trailer Hitch Installation - 2009 Nissan Xterra - Draw-Tite- Video
Today on our 2009 Nissan Xterra we're going to review an install of the Draw-Tite Class III 2-inch Receiver Tube Hitch, part number 75291. This is our Class III two inch by two inch receiver tube. It's capable up to 350 pounds of tongue weight and a 3500 pound tow capacity. The hitch itself is a completely steel and fully welded constructed hitch. You can see here we've got the nice, stylish, round cross tube that comes down to our receiver tube. The entire hitch is covered in a nice black powder coated finish to resist rust and corrosion. more
8/8/2015 11:32:07 AM
Trailer Hitch Installation - 2009 Nissan Xterra - Hidden Hitch- Video
Today on our 2009 Nissan X-Terra we're going to install the Hidden Hitch class three two inch receiver tube hitch, part number 70760. This is our class three, two inch by two inch receiver tube that's capable of up to three hundred and fifty pounds of tongue weight and a thirty five hundred pound tow capacity. The hitch itself is a completely steel and fully welded constructed hitch. You can see here we've got the nice stylish round cross tube that comes down to our receiver tube. The entire hitch is covered in nice black powder coated finish to resist rust and corrosion. On either side of the receiver tube is our chain hold down and then pre drilled into our receiver tube is the five eighths pin hole that goes all the way through. The second hole is a half inch pin hole for the J pin style anti rattle bolt. more
8/8/2015 11:31:47 AM
Trailer Hitch Installation - 2009 Nissan Xterra - Curt- Video
Today on our 2009 Nissan Xterra, we're going to review an install. The Curt Class Three Two Inch Receiver Two Hitch, part number 13514. Now here's what our hitch is going to look like once installed. This is our class three two inch by two inch receiver tube. It's capable of up to four hundred pounds of ton weight and a four thousand pound tow capacity. This hitch is completely steel and has a fully welded construction. more
8/8/2015 11:31:32 AM
