Summer Starts Here - Save up to 70%
Best 2014 Nissan Rogue Trailer Hitch Options- Video
Hey everybody, Ryan here at etrailer. Today, we're gonna be checking out our best trailer hitch options for the 2014 Nissan Rogue. We're gonna be looking at three different hitches available for the road: the etrailer.com, the CURT, and the Draw-Tite. And don't get me wrong, they're all fairly similar to the next one, but if you we're to ask me what one I would pick for my own Rogue, it'd be either the etrailer or the CURT. Honestly, I'd lean more towards the etrailer one just 'cause I like the way it looks a little bit better, the finish of it, more of a matte black, and I think it blends in a little bit, but that's not the only reason, the appearance. The etrailer and the CURT are going to have a little bit higher Tongue Weight capacities, so you can load them down a little bit more, and the receiver tube is gonna come out just a little bit further than the Draw-Tite, so it buys you a little bit of extra bumper clearance. more
8/24/2023 11:49:20 AM
etrailer.com Trailer Hitch Installation - 2014 Nissan Rogue- Video
Shane: Hi. I'm Shane with etrailer.com.Today you're going to be taking a look at, I'm going to walk you through the installation on the etrailer.com trailer hitch on our 2014 Nissan Rogue. This would be a great addition to your Nissan, not only if you're one of those that maybe wants to haul small trailers, but it's going to be great for bike racks. Then I'm going to be adding a cargo carrier to get some of that luggage and stuff out from inside of your vehicle, to give you more room inside for your family.This hitch is going to give you a 2"x 2" receiver tube opening. We're going to have a reinforced collar, give us a little extra stability there. Hitch pin hole is going to be 5/8" in diameter. more
4/25/2019 3:02:22 PM
Best 2014 Nissan Rogue Trailer Hitch Options e98846- Video
Today we're going to be taking a look at the best hitch options for your 2014 Nissan Rogue. Up top here we're going to have our etrailer brand hitch. Then right below that we're going to have our CURT hitch. Then finally down here at the bottom we're going to have our Draw-Tite hitch. Now all three of them are going to be Class 3 hitches, which means they're going to give us that 2" by 2" receiver tube opening and give us a wide variety of options for accessories to mount up. But if I was looking for a hitch for my Rogue, I would definitely go with the etrailer hitch for a few different reasons. more
12/14/2018 1:33:41 PM
Trailer Hitch Installation - 2014 Nissan Rogue - Curt- Video
Today on this 2014 Nisan Rogue, we're going to show you the Curt Class III 2" Receiver Hitch, part number C13204. This is what the hitch looks like once installed on our Rogue. On first glance, all you can see is the receiver tube from beneath the bumper coming out to the edge of the bumper right here. If we look on the outside it has a reinforcement around the edge. For safety chains it has a loop style hook up here, this uses a 5/8" hitch pin or your favorite locking pin. This reach goes almost all the way back towards the exhaust, which clears it by at least a few inches, then the arms go out from underneath and up into the frame. more
9/28/2015 10:46:25 AM
Trailer Hitch Installation - 2014 Nissan Rogue - Draw-Tite- Video
Today on our 2014 Nissan Rouge, we'll be installing the DrawTite hitch, part number 75902. To begin our install, we'll first need to remove the fascia panel on each side. To remove these fascia panels, we'll remove the push pin fasteners, three in total, and then a screw out center push pin fastener towards the front of the fascia. Note, there are panels on both sides and we're removing both. These fasteners are the same on each side. Now to remove the push pin fasteners, we're going to pry out on the center of the fastener with a flat blade screwdriver and then remove the fastener completely. To remove the screw out center push pin fastener, at the front of the fascia, you'll have to have a gentle hand as you screw the center out and then remove the fascia. With our fascia out, we'll set it aside for re-installation later. Now, move over to the driver's side and repeat the same process. Now, with our panels out of the way, it'll open up the frame rail. However, on the passenger side, we'll still need to remove the tow hook, which is secured by a total of four fasteners. more
10/20/2014 11:30:43 AM
Trailer Hitch Installation - 2014 Nissan Rogue - Draw-Tite 36542- Video
Today on our 2014 Nissan Rogue we'll be installing the Draw-Tite hitch, part number 36542. Now to begin our install we'll first need to remove the fascia panels on each side. To remove these fascia panels we'll remove the push pin fasteners, three in total, and then a screw-out center push pin fastener towards the front of the fascia. Now note there are panels on both sides and we'll be removing both. These fasteners are the same on each side. Now to remove the push pin fasteners we're going to pry out on the center of the fastener with a flat blade screwdriver and then remove the fastener completely. Now to remove the screw-out center push pin fastener at the front of the fascia, we'll have to have a gentle hand as you screw the center out and then remove the fascia. more
9/29/2014 9:43:03 AM
Trailer Hitch Installation - 2014 Nissan Rogue - Hidden Hitch- Video
Today on our 2014 Nissan Rogue we'll be installing the Hidden Hitch Trailer Hitch Receiver part number 87657. Now here's what our hitch looks like installed on our vehicle. Now we'll go ahead and give you a couple of measurements in helping you choose some accessories for your hitch such as a ball mount, a bicycle rack or a cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is approximately 6 inches. From the top of opening and the receiver to the ground is approximately 14-1/2 inches. Now let's go ahead and install our hitch. We're going to begin here over on the passenger's side. more
3/24/2014 9:08:12 AM
Trailer Hitch Installation - 2014 Nissan Rogue - Draw-Tite 75892- Video
Today on our 2014 Nissan Rogue, well be installing the Draw-Tite Trailer Hitch Receiver, part number 75892. Now, heres what our hitch looks like installed on our vehicle. Now, well give you a couple measurements in helping you choose some accessories for your hitch such as a ball mount, a bicycle rack, or a cargo carrier. From the center of the hitch pinhole to the outermost edge of the bumper is approximately 6 inches. From the top of the opening and receiver to the ground is approximately 14-1/2 inches. Now, lets go ahead and install our hitch. more
3/24/2014 9:05:57 AM
Trailer Hitch Installation - 2014 Nissan Rogue - Curt C12122- Video
Today on this 2014 Nissan Rogue, we're going to install part number C12122 from Curt. All right, this is what the hitch looks like on our Nissan. Now I'll give you some measurements to help you out in selecting some accessories such as a bike rack or a cargo carrier. From top of the receiver opening down to the ground will be about 14 1/2". From the center of the hitch pin hole to the outside edge of the bumper will be about 7 1/2". Now we'll go ahead and show you how the hitch is installed. First thing we need to do is go ahead and remove the under-body panels in each corner of the bumper. more
3/4/2014 1:45:59 PM
