Summer Starts Here - Save up to 70%
Best 2012 Nissan Quest Hitch Options- Video
Today on this 2012 Nissan Quest we'll be taking a look at the best hitch options available. Both of our hitches are class III, we have our Curt and that's part number C13078 and then we have our Draw-Tite and that's going to be part number 75714. Both of them install a little differently. With our Curt, you're going to have to get into the rear hatch area of your Quest and remove some bolts. Here on the passenger side you're going to have to remove the factory tow hook. For our Draw-Tite you don't have to remove the factory tow hook and all the installation is done on the outside of the vehicle. There are however some spacer blocks that you'll have to use, they install right here between our tow hook and our hitch. Both of our hitches have 5/8 hitch pin holes to secure our accessories. more
1/11/2017 3:34:01 PM
Trailer Hitch Installation - 2012 Nissan Quest - Draw-Tite- Video
Today on our 2012 Nissan Quest, well be installing Draw-Tite Hitch part number 75714. Here are a few measurements that will help you with selecting accessories such as a draw bar, cargo carrier or a bike rack. From the top of the receiver tube to the ground is 10 inches and from the center of the hitch pinhole to the outermost point of the bumper is 4 inches. Now well go ahead with our install. Now to begin our installation, well need to lower our exhaust system here at the rubber isolator. Using a spray lubricant, we can spray the isolator down and remove it with a pry bar or, in this case, with our exhaust hanger remover tool. more
4/12/2012 2:55:22 PM
