Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2006 Nissan Murano- Video
Today on this 2006 Nissan Murano we are going to be installing Curt hitch part number 13571. Before we get started installing our trailer hitch we need to do a couple of things in preparation. We first need to lower the exhaust system down. This vehicle has a dual exhaust system so we do need to remove the hangers from both sides of the vehicle. There are two on the driver side and one over on the passenger side outboard frame rail. The hanger on the passenger side is bolted to the side of the frame so we are going to unbolt it to lower it down. Over on the driver side we have just got some standard rubber hangers. To remove these we are going to spray down the studs of the hangers with a spray lubricant and then we can take a set of pliers or a pry bar and separate the two. If you still do not have enough working room underneath the vehicle it might be a good idea to remove the fourth exhaust hanger at the forward side of the vehicle almost even with the axle. 00:56 more
10/1/2010 10:52:18 AM
Trailer Hitch Installation - 2006 Nissan Murano 75148- Video
Today on this 2006 Nissan Murano we are going to install part number 87448 from Hidden Hitch. This is also going to apply to Draw-Tite part number 75148. The first thing we need to do is remove the tie down hook that is located on the driver side frame rail. There are two bolts on the side and two on the bottom. Next we will go ahead and remove this exhaust hanger right here. There are four bolts, two on this side, and two on the other side. Before we go any further, we are going to run this strap around the exhaust system to keep it from falling down and damaging anything. We will unbolt our last hanger right here. :44 more
10/1/2010 10:41:20 AM
