Summer Starts Here - Save up to 70%
Best 2014 Nissan Frontier Trailer Hitch Options- Video
Speaker 1: Today we're going to be taking a look at the best hitch options for your 2014 Nissan Frontier. Up top here we're going to have our Draw-Tite Class 3 hitch. Then right below that we're going to have our etrailer Class 3 hitch. Then finally, below that we're going to have our CURT Class 3 hitch.If I was looking for a hitch for my Frontier, I would probably go with the Draw-Tite for a few different reasons. It is going to have an increased tongue weight, which is going to be nice for a few different accessories we might want, or just to have your trailer, as well as some minor differences that it'll have over the two etrailer and the CURT. Let's take a closer look at all the differences between them.Our Draw-Tite is going to have the highest tongue weight at 750 pounds, and a gross trailer weight rating of 5,000 pounds. more
10/30/2018 9:57:12 AM
Trailer Hitch Installation - 2014 Nissan Frontier - Draw-Tite- Video
Today on our 2014 Nissan Frontier we'll be installing the Draw-Tite Max-Frame class three 2" receiver tube hitch, part number 75282. Now here's with our hitch will look like once it's installed. Just below the bumper we have access to our class three 2" by 2" receiver tube. Tucked up nice and neatly behind the bumper is our fully welded square crosstube for a nice solid construction. The finish on our hitch is a nice black powder coat and comes with a limited lifetime warranty. Next we'll go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 4". more
3/2/2015 8:44:23 AM
Trailer Hitch Installation - 2014 Nissan Frontier - Curt- Video
Today in 2014 Nissan Frontier, we'll be installing the Curt Class 3 two inch receiver tube hitch, part number one three two four one. Here's a look at our hitch once it's installed. The only thing that's really visible here underneath the bumper is our two inch by two inch receiver tube, chain hold downs, and our pre-drilled pinhole for our five eighths hitch pin. Our hitch has a nice square cross tube with a fully welded design and a black powder coated paint coverage. This hitch is capable of 500 pounds of tongue weight and 5000 pounds of towing capability. If you add a weight distribution hitch, you can have up to 800 pounds of tongue weight and 8000 pounds of towing capability. Couple that with a limited lifetime warranty, it's a really nice product for our vehicle. Next, I'll go ahead and give you a couple measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is four inches. more
2/26/2015 2:53:26 PM
