Summer Starts Here - Save up to 70%
Best 2016 Mazda CX-3 Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2016 Mazda CX3. Up top here we have the Draw-Tite, part number 24933. Here we have the Curt, part number C11418. Now these are both Class-1 hitches and they're going to have an 1-1/4" by an 1-1/4" receiver tube opening. They're going to use a 1/2" standard pinning clip. Now, the Curt does come with a 1/2" pinning clip, with the Draw-Tite you're going to need to pick one up. When it comes down to the final look when it's fully installed, I think the Curt is going to give you the best look here because all of this is going to be tucked up underneath the bumper and all you're going to see is the receiver tube opening. Whereas on the Draw-Tite, it is going to be tucked up nice and clean, but you will still see just a little bit of the crossbar hanging down. Not only is the Curt going to give you a cleaner look, since it is going to be tucked up, it's also going to give you just that little bit of extra ground clearance. more
3/20/2017 3:57:28 PM
Trailer Hitch Installation - 2016 Mazda CX-3- Video
Today on our 2016 Mazda CX3, we're going to be taking a look at and installing the Draw Tite Class One Custom Fit Trailer Hitch Receiver. Part number 24933. This is what our hitch looks like fully installed. You are going to see a little bit of the cross bar right underneath the muffler, and you're going to have your receiver tube opening coming out right in the middle. Now this is a class one hitch, so it's going to be an inch and a quarter by and inch and a quarter receiver tube opening. Now this is going to use a standard half inch pinning clip. It is not included in the kit, but you can pick one up on our website using part number PC-2. more
3/17/2017 10:42:24 AM
Trailer Hitch Installation - 2016 Mazda CX-3 C11418- Video
Today on our 2016 Mazda CX3, we're going to be taking a look at installing the Curt class one custom fit trailer hitch receiver part number C11418. Here's what our hitch looks like fully installed. As you can see, all that's going to be sticking out is the reviver tube. You're not going to see the crossbar. Its nice and tucked up in the bumper. That gives it a nice, clean, finished look. more
3/17/2017 10:42:07 AM
