Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2003 Jeep Liberty - Draw-Tite- Video
Today on our 2003 Jeep Liberty, well be installing Draw-Tite Hitch, part number 75128. Now, before we begin our install, here are some measurements to help you when selecting accessories. From the top of the receiver tube to the ground is 16-3/4 inches. From the center of the hitch pin hole to the outermost part of the spare tire is 10 inches. Now, to begin our installation well go ahead and identify the six mounting points within the frame. These are all weld nuts. more
6/14/2012 1:15:19 PM
Trailer Hitch Installation - 2003 Jeep Liberty- Video
Today on this 2003 Jeep Liberty, we are going to install part number 13044 from Curt. First off, we will go ahead and show you where the hitch mounts up on the vehicle. It is going to be using these three existing threaded holes in the frame. Now, since this is an older vehicle, we are going to have to take some time out to clean up the threads on the vehicle here. And we are just looking at the driver side. This is going to be identical, as well, on the passenger side. The first step to do is to go ahead and spray it down with some lubricant. Let it soak in a little bit. Then use one of the hitch bolts to help thread in a little bit and try to work some of that dirt and grime and rust out of there. We will go ahead and repeat the same process on the rest of these bolts. This will take a considerable amount of time to clean these out. 0:43 more
8/13/2010 9:15:13 AM
