Best 2007 Honda Pilot Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2007 Honda Pilot. The two best hitch options for your Honda Pilot are going to be the Draw-Tite class three, part number 75599, and the CURT class three, part number 13328. The biggest difference that you're going to see between the Draw-Tite and the CURT is that here on the Draw-Tite the face of the receiver tube opening and the hitch pinhole are further out. That's going to give you more clearance to the rear of the vehicle, but that's also going to make this a little bit more visible than here on the CURT. Both of these hitches are going to be great for your class three hitch-mounted accessories such as bike racks, cargo carriers, or ball mounts, but I think the biggest determining factor is going to be do you want one that's going to give you more clearance or do you want one that's going to be a little bit more hidden. We've got a CURT here on this Pilot. Although that Draw-Tite gives us more clearance you're still going to have pretty good clearance with this CURT because it isn't too far recessed in from the rear of this bumper here. more
7/27/2016 10:27:06 AM
Trailer Hitch Installation - 2007 Honda Pilot - Draw-Tite- Video
Today on our 2007 Honda Pilot, we'll be installing the DrawTite Hitch, part number 75599. Here's what our hitch will look like once installed. Next, we'll go ahead and give you couple measurements to assist you selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 3 1/4". From the top of the receiver tube opening to the ground is 17 3/4". This will assist your selecting accessories such as a ball mount, bike rack, or cargo carrier. more
9/29/2014 4:52:09 PM
Trailer Hitch Installation - 2007 Honda Pilot- Video
Today on this 2007 Honda Pilot, were going to be installing Curt Hitch part number 13328. Before we get started with our installation, were going to go ahead and give you some measurements that can help you in selecting your accessories like bike racks or cargo carriers. Our hitch hike from the ground to the top of our receiver tube measures 16inches. Our bumper clearance thats a measure from the center of the hitch pinhole to the farthest point of our vehicle measures right at 4inches. And now well go ahead and get started with our installation. It may not be necessary to remove the spare tire for installation, but weve gone ahead and done it just to get some extra space to make everything easier to view. more
1/4/2012 3:38:28 PM
