Summer Starts Here - Save up to 70%
Best 2007 Honda CR-V Trailer Hitch Options- Video
Hey everybody, Ryan here at etrailer. Today on our 2007 Honda CR-V, we're gonna be checking out our best trailer hitch options. We're gonna be looking at three different trailer hitches today and there are some more available for the CR-V but these are gonna be my top picks. And so right here, we have the Draw-Tite, this hitch is the Curt, and the third one is actually installed on our CR-V and that's gonna be the etrailer.com hitch. What one I would pick personally would really just depend on how I plan on using my trailer hitch. If I was someone that, you know, did a little bit of everything, kind of your general purpose stuff, use your accessories, you do a little bit of towing and anything in between and you know, appearance was a little more important to me as well, I would either go with the Curt or the etrailer.com hitch. more
10/11/2023 12:46:16 PM
Trailer Hitch Installation - 2007 Honda CR-V - Hidden Hitch- Video
Today on our 2007 Honda CRV, we'll be installing Hidden Hitch 2 inch receiver tube hitch, part number 87440. This is what our hitch will look like once it's installed. Next I'm going to give you a couple measurements, this will assist you selecting accessories such as a ball mount, bike rack, or cargo carrier. From the center of the hitch pin hull to the outermost edge of the bumper is 2 and a half inches. From the top of the receiver tube opening to the ground is 15 and a half inches. Now go ahead with installation. To begin our install, we'll first go ahead and lower the exhaust on the passenger side. more
6/16/2014 8:38:10 AM
Trailer Hitch Installation - 2007 Honda CR-V - Curt- Video
Today on our 2007 Honda CRV, well be installing Curt Hitch, part number 16555.This is what our hitch will look like once its installed. Next, well go ahead and give you a couple of measurements. This will assist your selecting accessories such as a ball mount, bike rack, or cargo carrier. From the center of the hitch pin hole, to the outermost edge of the bumper is 2 inches. From the top of the receiver tube opening to the ground is 15 inches.Now, well go ahead with the installation. To begin our install, well first go ahead and lower the exhaust from the passenger side. more
6/13/2014 1:28:17 PM
Trailer Hitch Installation - 2007 Honda CR-V - Curt C11555- Video
Today on our 2012 Honda CR-V, we'll be installing the Curt Hitch, part number C11555. This is what our hitch will look like once installed. Next, we're going to be couple measurements, this will assist you in selecting accessories such as a ball mount, bike rack, or cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper, is 5-1/2 inches from the top of the receiver tube opening to the ground, is 12-1/2 inches. Now we'll go ahead with the installation. Now to begin our install, we'll first go ahead and lower the exhaust in the passenger side. To lower the exhaust, we will remove the two rubberized slaters from the metal hanger. more
6/9/2014 10:10:21 AM
Trailer Hitch Installation - 2007 Honda CR-V- Video
Today on this 2007 Honda CR-V we are going to install part number 60869 from Hidden Hitch. This will also apply to Draw-Tite part number 24792. This is what the hitch looks like when it installed on the vehicle. Next we will give you some measurements that will help you out on ing some accessories. From the top of the receiver opening down to the ground on this particular vehicle is going to be 13 inches and from the center of the hitch pin hole to the outside edge of the bumper is going to be 5-3/4 inches.0:25 more
9/22/2011 12:37:39 PM
