Summer Starts Here - Save up to 70%
Best 2004 Honda CR-V Hitch Options- Video
Today we're going to be taking a look at the best hitches available for the 2004 Honda CRV. Here we have our Draw-Tite. This is a Class 3. It offers the 2" by 2" receiver tube opening. Its part number is 75690. Here we're going to have our Curt. more
4/13/2017 11:39:26 AM
Trailer Hitch Installation - 2004 Honda CR-V - Draw-Tite- Video
Today on our 2004 Honda CR-V, we're going to review and install the Draw-Tite Class I 1-1/4" receiver tube hitch, part number 24772. Here's what our hitch is going to look like once it's installed. As you can see, they're really compact hitch. It's tucked up nicely underneath the vehicle. It's got a square cross tube design and a fully welded construction, and the entire hitch is a nice black powder coated finish, so it blends in nicely with the underbody of the vehicle. Out here, we have our chain hold down on each side of the receiver tube, along with the pre-drilled 1/2" pin hole that goes all the way through. more
6/26/2015 2:44:22 PM
Trailer Hitch Installation - 2004 Honda CR-V - Draw-Tite 75690- Video
Today on our 2004 Honda CR-V we're going to review an install the Draw-Tite Class III 2 in receiver to hitch, part number 75690. Now here's what our hitch is going to look like once it's installed. As you can see we've got the sturdy, square cross tube design, and a fully welded construction. It's got a nice black powder coated finish to resist rust and corrosion. It also blends in nicely with the under-body of the vehicle. One either side of our receiver tube are our chain hold downs. Pre-drilled, going all the way through the receiver tube is our 5/8 pin hole and our 1/2 inch pre-drilled hole for the anti-rattle J pin. more
6/25/2015 12:00:07 PM
Trailer Hitch Installation - 2004 Honda CR-V - Curt- Video
Today on our 2004 Honda CR-V well be installing the Curt trailer hitch part number 13535. This is what the hitch looks like installed. Now Ill give you some measurements to help you choose accessories for your hitch like bike racks or cargo carrier. From the center of the hitch pinhole to the outside edge of the bumper is about 2 1/2 inches and from the top of the receiver tube to the ground is about 15 and 1/4 inches. Now Ill show you how to install it. The first step to install a hitch, lower the muffler out of the way. Well spray down the exhaust hangers on either side of the muffler with a spray lubricant and slide them towards the front of the vehicle and off the hanger post. more
7/1/2014 11:37:32 AM
Trailer Hitch Installation - 2004 Honda CR-V - Hidden Hitch- Video
All right, today is 2004 Honda CRV we're going to install part number 60952, the Hidden Hitch. Now this is what the hitch looks like once it's installed on our CRV. Next we'll give you some measurements to help you out selecting some accessories, such as a bicycle rack or a cargo carrier. From top of the receiver opening down to the ground, will be about 13 inches. And from the center of the hitch pinhole out to the edge of the spare tire, will be about 10 and 1/2 inches. Now let's go ahead and show you how the hitch is installed. First thing you do is go ahead and lower the exhaust. more
7/1/2014 8:21:33 AM
