Trailer Hitch Installation - 2005 Honda Accord 4 Cylinder - Draw-Tite- Video
Today, we're going to go over the installation on our 2005 Honda Accord, on our draw tight, hitch part number 24787. There is a difference in installation between a four and a six-cylinder, so we were going over the four-cylinder model today.Now, before we begin our installation, there are a couple of measurements that may help you in selecting the proper bike rack or cargo carrier. From the top of the receiver opening to the ground is 12-and-a-half inches, and from the center pin to the edge of the bumper is four-and -three quarters inches. To begin with, we need to get the exhaust out of the way, so we'll spray a little lubricant on the rubber boots and pry them out of the way, lowering the exhaust to make it easier to get to the bolt hole. Sometimes, a pry bar and using a small block of wood will help aid in this removal.Now that the exhaust is out of the way, we'll show you where the location for the bolt holes will be. There's one on each side, as well as using the tow hook. more
4/25/2013 8:22:18 AM
