Summer Starts Here - Save up to 70%
Best 2011 Ford Fusion Trailer Hitch Options- Video
Shane: Hi, I'm Shane with etrailer.com. Today I'm going to go over the best trailer hitch options for your 2011 Ford Fusion. Here on top we're going to have the Draw-Tite, here on the bottom we're going to have the Curt. Let's go over a few of the differences between these two. These two hitches are going to be very similar. To the few differences that we have, is on our Curt we're going to have a reinforced collar. more
11/6/2019 6:27:21 PM
Trailer Hitch Installation - 2011 Ford Fusion - Curt- Video
Today on our 2011 Ford Fusion well be installing the Curt Hitch part number 11390. This is what our hitch will look like once its installed. Next, well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is 5-1/4 inches. From the top of the receiver tube to the ground is 11-3/4 inches. This will assist you with selecting accessories such as a drawbar, a bike rack or a cargo carrier. more
10/2/2012 10:44:33 AM
Trailer Hitch Installation - 2011 Ford Fusion- Video
Today on our 2011 Ford Fusion, we'll be installing Draw-Tite Hitch, part number 24865. Here are a couple of measurements to assist you in selecting accessories for your new hitch such as bike rack or cargo carrier. From the center of hitch pinhole to the outermost part of the bumper is 5 inches and from the top of the receiver tube to the ground is 11-1/2 inches. And now let's go on with the install. We'll begin the installation by removing the exhaust hangers in these three locations, two just behind the rear mufflers and one right at the Y intersection. It would be a good idea before we remove the exhaust hangers to spray them with some lubricant. more
2/23/2012 3:05:27 PM
