Best 2011 Dodge Nitro Hitch Options- Video
Speaker 1: Today we're going to be taking a look at the best hitch options for your 2011 Dodge Nitro. On top here we're going to have our Draw-Tite hitch, and right below that we're going to have our CURT. Now on our Nitro itself we do have the Draw-Tite installed. As you can see, that crosstube's going to be hidden right behind the bumper and all we're really going to see is that receiver tube sticking out and giving it a nice clean, finished OEM look.Since we saw the Draw-Tite on our Nitro and it is going to be concealed and all we're really going to see is this plate and then the receiver tube opening sticking out, whereas with the CURT, right about here where we can see it sloping up towards the sides, this is going to be visible and we are going to see that round tube going across along with the receiver tube sticking out.Now the way we're going to mount our accessories on our hitches is they're going to use a standard 5/8 pin and clip. Now they're not included in either one of our kits here but you can pick one up on our website using part number PC3.Now if you noticed, the Draw-Tite's going to have a second hole towards the back of the receiver tube opening here. That's going to be for the j-pin stabilization device. more
10/11/2017 10:48:48 AM
Trailer Hitch Installation - 2011 Dodge Nitro - Hidden Hitch- Video
Today on our 2011 Dodge Nitro were going to install the Hidden Hitch part no. 87426. Here are a couple of measurements that will assist you in selecting some accessories for your new hitch.From the center of the hitch pin hole to the outer most edge of the bumper is 1 1/2 inches. From the top of the receiver tube to the ground is 17 inches. Now lets go ahead with the installation.First we'll go ahead and point out our attachment points. Weve got 3 weld nuts in the frame on each side. more
4/3/2012 10:59:58 AM
Trailer Hitch Installation - 2011 Dodge Nitro - Draw-Tite- Video
Today on our 2011 Dodge Nitro were going to install a Draw Tite hitch part no. 75517. Here are a couple of measurements that will assist you in selecting some accessories for your new hitch.From the center of the hitch pin hole to the outer most edge of the bumper is 1 1/2 inch. From the top of the receiver tube to the ground is 17 inches. Now lets go ahead with the installation.First we go ahead and point out our attachment points. Weve got 3 weld nuts in the frame on each side. more
4/3/2012 10:59:40 AM
Trailer Hitch Installation - 2011 Dodge Nitro- Video
Today on our 2011 Dodge Nitro were gonna install a Curt hitch part number 13334. Here are a couple of measurements to help you in selecting some accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 2. From the top of the receiver tube to the ground is 19.Now lets go ahead with the installation.First we'll go ahead and point out our tucker points. We got 3 weld knots in the frame on each side. more
4/2/2012 11:00:11 AM
