2010 Dodge Nitro Trailer Hitch Installation And Review Videos

Best 2010 Dodge Nitro Hitch Options- Video

Speaker 1: Today we're going to be taking a look at the best hitch options for your 2010 Dodge Nitro. On top here we're going to have our Draw-Tite hitch, and right below that we're going to have our CURT. Now on our Nitro itself we do have the Draw-Tite installed. As you can see, that crosstube's going to be hidden right behind the bumper and all we're really going to see is that receiver tube sticking out and giving it a nice clean, finished OEM look.Since we saw the Draw-Tite on our Nitro and it is going to be concealed and all we're really going to see is this plate and then the receiver tube opening sticking out, whereas with the CURT, right about here where we can see it sloping up towards the sides, this is going to be visible and we are going to see that round tube going across along with the receiver tube sticking out.Now the way we're going to mount our accessories on our hitches is they're going to use a standard 5/8 pin and clip. Now they're not included in either one of our kits here but you can pick one up on our website using part number PC3.Now if you noticed, the Draw-Tite's going to have a second hole towards the back of the receiver tube opening here. That's going to be for the j-pin stabilization device. more

10/11/2017 10:48:33 AM

Trailer Hitch Installation - 2010 Dodge Nitro- Video

Today, on our 2010 Dodge Nitro, we'll be installing the Curt Trailer Hitch Receiver in a class three with a two inch receiver opening part number 13334. Here is what our hitch looks like installed on our vehicle. We'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the opening in the receiver to the ground is approximately 17 3/4 inches. From the center of the hitch pin hole to the outermost edge of the bumper is approximately one and a half inches, so the hitch actually sticks out past your rear bumper approximately one inch. Let's go ahead and install our hitch. Let's go ahead and point out the six locations that we'll be using to mount our hitch. more

10/18/2013 1:28:04 PM

Trailer Hitch Installation - 2010 Dodge Nitro 75517- Video

Today on this 2010 Dodge Nitro we are going to install part number 75517 from Draw-Tite. This will also apply to part number 87426 from Hidden Hitch. This is what the hitch looks like when it is on the vehicle. Now we will go ahead and give you a couple of measurements that will help you out in ing accessories for it, such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground is going to be 17-1/2 inches on this particular vehicle. And from the center of the hitch pin hole to the outside edge of the bumper is going to be 2 inches. Next we will show you how it gets installed. 0:34 more

3/11/2011 1:03:17 PM