etrailer Class III Trailer Hitch Installation - 2010 Dodge Grand Caravan- Video
Hey, everybody. How's it going Today, we're gonna be going over and showing you how to install the etrailer Trailer Hitch Receiver here on a 2010 Dodge Grand Caravan. So here's what our trailer hitch is gonna look like installed on our van here. Now, it has a hidden cross tube design, meaning the cross tube is gonna be tucked away behind the bumper. So the only thing we are able to see is the actual receiver tube, which has a nice black powder coated finish. Therefore, it's gonna blend in with the vehicle well, and it's also gonna help protect the hitch from rust and corrosion. more
9/12/2022 8:27:42 AM
Best 2010 Dodge Grand Caravan Trailer Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2010 Dodge Grand Caravan. Up top here we're going to have our etrailer has, which is going to be a Class 3. Right below that we'll have our Draw-Tite that's also a Class 3. Then finally at the bottom we'll have our CURT, again a Class 3 hitch. Since all of our hitches are going to be a Class 3 hitch, they're all going to give us that 2" by 2" receiver tube opening and have a lot of different accessories available that we can mount in them, all the way from a ball mount, a bike rack, or even a cargo carrier.Regardless if you're towing and you're using a ball mount or you're just using it for a bike rack, all of the accessories going into each one of our hitches is going to use a standard 5/8 pin and clip to secure them. However, the Draw-Tite you'll notice there is going to be a secondary hole towards the opening on our receiver. more
12/14/2018 1:27:26 PM
Trailer Hitch Installation - 2010 Dodge Grand Caravan- Video
Today on this 2010 Dodge Grand Caravan we are going to install part number 87451 from Hidden Hitch. This will also apply to part number 75579 from Draw-Tite. The first thing we need to do is lower the exhaust over on the passenger side and there are two hangers that we need to undo. There is one right here behind the muffler and there is one farther up past the axle by the main muffler. All you have got to do is unbolt right here. Now you can see the two attaching points in the passenger side here. We are going to use this bolt and this bolt right next to this line. On the driver side is going to use all three bolts shown here. Lets start removing the bolts. We will start with the bolts closest to the bumper and work our way back. 00:52 more
9/27/2010 9:09:18 AM
