bing tracking image

2012 Dodge Durango Trailer Hitch Installation And Review Videos

     

Best 2012 Dodge Durango Trailer Hitch Options- Video

Best 2012 Dodge Durango Trailer Hitch Options

Hey everyone, Ryan here at etrailer. Today we're gonna be checking out our best trailer hitch options for your 2012 Dodge Durango. Today we're gonna be looking at four different trailer hitches. Right here we have a Draw-Tite, this one is the etrailer.com hitch, followed by the Curt and another Draw-Tite. And if he we're to ask me, you know what one would I put on my own Durango, hands down it would be this Draw-Tite up here. Really for two big reasons. more


Watch Video

2/13/2023 12:10:16 PM



Trailer Hitch Installation - 2012 Dodge Durango - Draw-Tite- Video

Trailer Hitch Installation - 2012 Dodge Durango - Draw-Tite

Today on your 2010 Dodge Durango, we're going to be taking a look at and installing the Draw-Tite Max Frame custom fit trailer hitch receiver, part number 75713. Here's what our hitch looks like fully installed. It's going to sit right below our bumper and our cross tube is going to come back and go a little bit angled towards the front of the vehicle. It's going to have a two-inch by two-inch receiver tube opening. It is a class-three hitch. It's going to have a nice reinforced collar on it, giving it a nice clean look. If we bring our attention here to the side of our receiver tube, this back hole here, this is going to be for a standard 5/8th pin and clip which is not included with our hitch, but you can pick one up on our website using part number PC3. more


Watch Video

5/2/2017 12:17:27 PM



Trailer Hitch Installation - 2012 Dodge Durango - Curt- Video

Trailer Hitch Installation - 2012 Dodge Durango - Curt

Today on our 2012 Dodge Durango well be installing the Curt hitch part #: C13182. This is what our hitch will look like once its installed. Next well go ahead and give you a couple of measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 4 and a quarter inches. From the top of the inside of the receiver tube opening to the ground is 14 and three quarter inches. This will assist you with selecting accessories such as a ball mount, a bike rack or a cargo carrier. more


Watch Video

1/17/2013 7:03:16 AM



  1