Summer Starts Here - Save up to 70%
Best 2013 Chrysler Town And Country Trailer Hitch Options- Video
Hey everybody, Ryan here at etrailer, today we're gonna be checking out our best trailer hitch options for your 2013 Chrysler Town and Country. So today we're gonna be looking at three different hitches. Up top here we have the etrailer.com, below it we have the Curt, and right here we have the Draw-Tite. I'm not gonna lie, this video is gonna be pretty short and sweet and that's because the hitches share a lot of similarities, there's not a whole lot of differences about 'em, other than a couple that I can come up with, and that's really gonna have to do with the appearance of it, more specifically the finish of the powder coat and bumper clearance. So, how much clearance you're gonna have relative to your back bumper. Now, if I had to choose one of these for my own vehicle, I'd probably lean towards the etrailer one. more
3/21/2022 11:13:40 AM
etrailer.com Trailer Hitch Installation - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country, we're gonna be taking a look at and showing you how to install the Class III 2" etrailer.com trailer hitch receiver. Now the majority of the hitch is hidden behind the bumper, so the only thing you're going to be able to see is the receiver tube. This is a Class III hitch, so it's going to utilize that 2" by 2" receiver tube opening. It also has a nice, thick, reinforced collar to help with support and also utilizes a standard size 5/8" hitch pin hole. However, it does not come included with a hitch pin, but if you need one, you can pick one up on etrailer.com. Now it has a loop style safety chain opening, which is welded onto the bottom and the holes are large enough to use just about any style or shape safety chain hook that you might have.Now one thing I really like about it is its finish. more
2/27/2019 7:07:49 PM
Trailer Hitch Installation - 2013 Chrysler Town and Country - Curt- Video
Today on our 2013 Chrysler Town & Country we'll be installing the Curt Hitch part number C12264. This is the Curt Class II 1-1/4 inch receiver tube hitch. First we'll need to gain access to the frame and to do that we'll lower the exhaust here on the passenger side. To lower the exhaust on this application we're going to remove the hardware from the hanger that secures it to the frame or body of the vehicle. We'll have one here at the tailpipe, one just in front of the rear axle which should give you enough clearance to get the hitch in. Quick tech tip, if we remove one more hanger, here at the front of the muffler, it'll give you some additional working room between the tailpipe and the frame. more
10/2/2014 1:10:30 PM
Trailer Hitch Installation - 2013 Chrysler Town and Country - Hidden Hitch- Video
Today on this 2013 Chrysler Town and Country were going to install part number 87451 from Hidden Hitch. This is what the hitch looks like once its installed on the vehicle. Next well give you some measurements that will help you out in selecting some accessories, such as a ball mount, a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 13 inches. From the center of the hitch pin hole to the edge of the bumper will be about six and a quarter inches. Now well go ahead and show you how the hitch is installed. more
2/8/2013 3:45:27 PM
Trailer Hitch Installation - 2013 Chrysler Town and Country - Draw-Tite 75579- Video
Today on this 2013 Chrysler Town and Country, were going to install part number 75579 from Draw Tite. All right this is what the hitch looks like once its installed on the vehicle. Next well give you some measurements that will help you out in selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be about 13-1/4 From the center of the hitch pin hole to the edge of the bumper will be about 6-1/4.Now well go ahead and show you how the hitch is installed. The first step is to go ahead and lower the exhaust. Right behind the muffler is a hanger well unbolt and one above the axial that well unbolt as well. more
2/8/2013 2:52:22 PM
Trailer Hitch Installation - 2013 Chrysler Town and Country - Draw-Tite 36455- Video
Today on this 2013 Chrysler Town and Country, were going to install part number 36455 from Draw Tite. This is what the hitch looks like once its installed on the vehicle. Next well give you some measurements to help you out in selecting some accessories, such as a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 13-1/4 and from the center of the hitch pin hole to the outside edge of the bumper will be about 6-3/4. Now well go ahead and show you how the hitch is installed. First thing we need to do before we do our install is to go ahead and lower the exhaust out of the way. more
2/8/2013 2:52:17 PM
Trailer Hitch Installation - 2013 Chrysler Town and Country - Curt 13364- Video
Today on our 2013 Chrysler Town and Country well be installing Curt hitch part number 13364. Well go ahead and give you a few measurements to help you with selecting accessories such as a draw bar, bike rack, or a cargo carrier. From the center of the hitch pin hole to the outer most part of the bumper is four inches. From the top of the receiver tube to the ground is 12 and a quarter inches. Now to begin our installation well need to lower the exhaust. Well remove the bolts holding the exhaust and muffler hangers. more
10/26/2012 11:47:10 AM
