Best 2009 Chrysler Town And Country Trailer Hitch Options- Video
Hey everybody, Ryan here at etrailer today on our 2009 Chrysler Town and Country, we're gonna be checking out our best trailer hitch options. So today we're gonna be looking at three different hitches. Up top here we have the etrailer.com, below it we have the Curt, and right here we have the Draw-Tite. I'm not gonna lie this video is gonna be pretty short and sweet and that's because the hitches share a lot of similarities. There's not a whole lot of differences about 'em other than a couple that I can come up with. And that's really gonna have to do with the appearance of it. more
3/21/2022 11:11:26 AM
etrailer Class III Trailer Hitch Installation - 2009 Chrysler Town and Country- Video
Hey everybody, Ryan here at etrailer. Today on our 2009 Chrysler Town and Country we're gonna be showing you how to install the etrailer.com class three two-inch trailer hitch receiver. But before we do that, why don't we check it out and make sure that this hitch it's gonna meet your needs. So when it comes to the Town and Country, these vans are really capable, very functional vehicles and people use them to do a lot of different things whether that's putting a bike rack back here, maybe pulling a trailer around. Whatever the case may be, if it we're me, I'd want a hitch I'll be able to handle just about anything you wanna throw at it. And with this one here, it's gonna do just that because of the size of the hitch and the weight capacities and things like that which we'll get to in a minute. more
3/14/2022 3:23:27 PM
Trailer Hitch Installation - 2009 Chrysler Town and Country - Curt- Video
Today on our 2009 Chrysler Town and Country, well be installing the curt hitch part number 13364. First, well go ahead and low the exhaust to give us more access here on the passenger side to the frame rail. To lower the exhaust well remove the two fasteners. One just forward of the rear axle and one just behind it. In the passengers side, well be removing the two rear fasteners that go into the weld nuts or bumper brace of the vehicle. On the drivers side, well remove the three rear fasteners. more
10/4/2012 7:48:16 AM
Trailer Hitch Installation - 2009 Chrysler Town and Country- Video
Today we are going to install part number 36455, a Draw-Tite Class II receiver hitch, on a 2009 Chrysler Town and Country. This hitch is going to attach to the frame by using these bolts right here. So we will take these bolts out and they will be reused in the installation of the hitch. As you can see, on the passengers side the exhaust is blocking our access to these bolts. So we will need to get that out of the way. This is going to be the first of two exhaust hangers we are going to take down we will start taking this one off first. OK, we have got our exhaust down and out of the way. We actually put a little strap on it just to hold it out of the way so it is a little easier to see what is going on. When we undo the flash bolt right here, this is actually connected to a bracket inside the frame for the bumper, so this actual part of the bumper here - it is actually going to - when we let go of this bolt the bracket is going to tilt up inside the frame. So you want to take care when you take out the bolt to be careful you do not move the bracket around too much. more
5/18/2009 9:55:22 AM
