Summer Starts Here - Save up to 70%
Best 2008 Chrysler Town And Country Trailer Hitch Options- Video
Hey everybody, Ryan here at etrailer. Today, on our 2008 Chrysler Town & County, we're gonna be checking out our best trailer hitch options. So, today we're gonna be looking at three different hitches. Up top here, we have the etrailer.com, below it we have the CURT and right here we have the Draw-Tite. I'm not gonna lie, this video. is gonna be pretty short and sweet. more
3/16/2022 11:51:24 AM
Trailer Hitch Installation - 2008 Chrysler Town and Country - Curt- Video
Today on our 2008 Chrysler Town & Country we're going to be taking a look at and installing the Curt Class II Custom Fit Trailer Hitch Receiver, part number C12264. Here's what our hitch looks like fully installed. It's going to sit up underneath our bumper and all we're going to see is the receiver tube opening. Now, it is a class II, so it's going to give you that inch and 1/4 by inch and 1/4 receiver tube opening, and it has a nice reinforced collar, giving it that nice clean, flush look. Now, our hitch is going to use a standard 1/2 inch pin and clip which is included, so that's a nice benefit of not having to pick anything extra up. Now, the safety chain loops are going to be a rolled steel stock that's welded onto the bottom and as you can see, we're going to have plenty of room to get most sized chains on or off without interfering with anything. Now, our hitch is going to feature a 3,500 pound gross trailer weight rating and a 350 pound tongue weight. more
4/19/2017 9:07:25 AM
Trailer Hitch Installation - 2008 Chrysler Town and Country - Curt 13364- Video
Today on our 2008 Chrysler Town and Country, we'll be installing the Curt 2 Inch Receiver Hitch, part number 13364. This is what our hitch will look like once installed. Next, we'll go ahead and give you a couple measurements to assist your selecting accessories for your new hitch, such as a ball mount, bike rack, or cargo carrier. From the center of the hitch pin hole, to the outermost edge of the bumper is 4 1/4 inches. From the top of the receiver tube opening to the ground is 13 inches. Now we'll go ahead with installation. Now to begin our install, we'll first go ahead and point out the attachment points. more
9/17/2014 9:47:21 AM
Trailer Hitch Installation - 2008 Chrysler Town and Country - Hidden Hitch- Video
Today on our 2008 Chrysler Town and Country, we'll be installing Hidden Hitch, part number 90169. This is what our hitch will look like once it's installed. Next we're going to give you a couple of measurements to assist your selecting accessories for your new hitch such as a ball mount, bike rack or cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is 7 inches. From the top of the receiver tube opening to the ground is 13 inches. Now we'll go ahead with the installation. Now to begin our install, we'll first go ahead and identify our attachment points. We'll have a total of four attachment points, two on each side. more
9/11/2014 3:19:29 PM
Trailer Hitch Installation - 2008 Chrysler Town and Country - Draw-Tite- Video
Today on our 2008 Chrysler Town and Country we'll be installing the Draw Tite Hitch, part number 36455. This is what our hitch will look like once installed. Next we're going to give you a couple measurements to assist your selecting accessories for your new hitch such as a ball mount, bike rack or cargo carrier. From the center of the hitch hole to the outer most edge of the bumper is 7 inches. To the top of the receiver tube opening to the ground is 13 inches. Now we're go ahead with installation. To begin our install we'll first go ahead and identify our attachment points. We'll have a total of 4 attachment points, 2 on each side. more
9/11/2014 3:18:40 PM
Trailer Hitch Installation - 2008 Chrysler Town and Country- Video
Today we are going to be installing part number 87451 on a 2008 Chrysler Town and Country. We are over here on the drivers side frame rail, and there are three attaching points: one there, one there, one there. So we are going to need to remove all three of these bolts. All the hardware for the hitch is actually already in the frame of the vehicle so there is going to be no bolt kit that comes with the hitch. Again, it is this one, this one, and this one that need to be removed. And if we go over here to the passengers side, we are going to have to go ahead and take the exhaust off the hanger to access the passengers side bolts. You can kind of see there is one toward the rear here near the bumper, and then one a little bit more forward, as well. We need to remove those bolts. more
9/22/2008 7:49:01 AM
