Summer Starts Here - Save up to 70%
Best 2006 Chrysler Town and Country Hitch Options- Video
Today, on our 2006 Chrysler Town and Country, we'll be looking at the most popular hitch options. On the top, we have a Draw-Tite class 3, part number 75305. In the middle, we have a Draw-Tite class 2, part number 36320, and on the bottom, we have a Curt class 3, part number 13389. Now, our class 3 Draw-Tite here is different than our other 2 hitches in the regards that there's 2 poles here. The larger 5/8 diameter pole is for your standard hitch pin or your locking device to secure your ball mount, bike carrier, or cargo rack. The one in front of it, right here towards the back opening of the receiver, is a 1/2 inch diameter hole for a J-pin stabilization device. J-pin stabilization device allows you to secure your bike carrier or your cargo rack, to get some of that annoying shake, play, and rattle out of the shank of the receiver if your hitch-mounted accessory doesn't already have an anti-rattle device built into it. more
7/28/2016 1:31:32 PM
Trailer Hitch Installation - 2006 Chrysler Town and Country - Draw-Tite- Video
Today on our 2006 Chrysler Town and Country, we'll be installing the Draw-Tite Max-Frame Class III Trailer Hitch Receiver, Part Number 75305. Here's what a hitch looks like once it's installed. As you can see, it tucks up fairly nicely behind the bumper of our vehicle. The only part that really hangs down is the two hitch receive itself, and a frame of the hitch. You see we've got this nice cutout around the exhaust, so we don't have to lower the exhaust all to install the hitch. The hitch installs using factory hardware already on the vehicle, so there's no drilling or modification of the vehicle required at all. more
7/21/2016 2:59:47 PM
Trailer Hitch Installation - 2006 Chrysler Town and Country - Curt- Video
Today on our 2006 Chrysler Town and Country, we'll be installing the curt trailer hitch receiver, inch and a quarter, class 2. Part number C12289. You can see it's a very clean installation here. You may note we have this nice little cut out here around the muffler. You don't have to worry about the hitch getting damaged from any exhaust gases or any heat that comes from the exhaust system. A nice gloss black, powder coat finish. This hitch is rated for 3,500 pounds gross trailer weight rating and 350 pounds of max tongue weight rating. You want to consult with your owner's manual of your 2006 Town and Country first and go by whichever numbers is less. more
6/23/2016 11:22:26 AM
Trailer Hitch Installation - 2006 Chrysler Town and Country - Curt 13389- Video
Today on our 2006 Chrysler Town and Country, we're going to take a look at and show you how to install a CURT custom fit class 3 trailer hitch receiver. This offers a 2-inch opening. It's part number is 13389. Here's what our hitch look like once we get it installed on our Town and Country. As you can see, it's really custom-fit to fit right along the bottom edge of that bumper, receiver tubes nice and tucked in. It's inside of the rear bumper so we won't have to worry about hitting our knee on it as we walk by or anything like that. The exhaust comes out right here just above the hitch bracket, that kind of comes down and around. It's a nice heavy duty hitch, this is going to be great for your bike racks, cargo carriers, and even towing. more
8/8/2015 11:33:41 AM
