2015 Buick LaCrosse Trailer Hitch Installation And Review Videos

Trailer Hitch Installation - 2015 Buick LaCrosse - Hidden Hitch- Video

Today on our 2015 Buick LaCrosse, we will be taking a look at and installing the hidden hitch, custom fit, class II trailer hitch receiver with draw bar, part number 90242. This is what our hitch will look like once it's installed. It's going to be nice and sleek, tucked up against the back side of the bumper. It's going to be that square tube, that's going to have a nice visual appearance and aesthetically pleasing from the back end of your vehicle. It's going to be fully welded on either of the two plates. Note that this does have a few plates that you will have to put together. You'll have one connected to the cross member in the back side and then the other plate here is going to be connected up top. more

9/30/2015 11:33:26 AM

Trailer Hitch Installation - 2015 Buick LaCrosse - Draw-Tite- Video

Today on our 2015 Buick LaCrosse, we're going to be taking a look at and installing the Draw-Tite custom fit Class II Trailer Hitch Receiver, part number 36538. This is what our hitch will look like once it's installed. It's going to be nice and sleek, tucked up against the back side of the bumper. It's going to be that square tube. That's going to have a nice visual appearance and aesthetically pleasing from the back end of your vehicle. It's going to be fully welded on either of the two plates. Not that this does have a few plates that you'll have to put together. You'll have one connected to the crossmember in the back side and then the other plate here is going to be connected up top, with the crossbeam connecting them both together. It's going to have four bolts located up here at the front, that's going to keep everything secured together. The receiver tube itself is going to be 1 1/4 inch x 1 1/4 inch with a 1/2 inch pin hole going all the way through. Capable of carrying up to 300 pounds, tongue weight, and carrying up to 3500 pounds, towing capacity. more

9/30/2015 11:32:57 AM

Trailer Hitch Installation - 2015 Buick Lacrosse - Curt- Video

Today on our 2015 Buick LaCrosse, we'll be reviewing and installing the Curt class 2 trailer hitch receiver, part number C12115. This is what you're hitch will look like once it's installed. It's going to be tucked up underneath the backside of the bumper, providing a nice sleek look, low profile from the back end of the vehicle. It's going to be black powder coated, for durability against the elements, and to prevent any kind of rust and corrosion. Up top you're going to have that inch and 1/4 by inch and 1/4 receiver tube, with a 1/2 inch pin hole going straight through. Chain tie downs on either side, you can see that you're going to have about enough room to get about two fingers through on each side. This hitch is capable of carrying 350 pounds of tongue weight, and 3,500 pounds of towing capacity. Remember that that towing capacity is your trailer, and everything in it combined. more

9/24/2015 11:52:53 AM