Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2013 Acura MDX - Curt- Video
Today on our 2013 Acura MDX we're going to be taking a look at the CURT Custom Fit Class 3 trailer hitch receiver, part number 13354. Here's what our hitch looks like fully installed. Now it is a Class 3 hitch so it's going to give us that 2" by 2" receiver tube opening. It does feature a reinforced collar, giving it added strength and a nice clean, finished look. Our hitch is going to utilize a standard 5/8 pin and clip. They're not included but you can pick some up on our website using part number PC3. Now as far as the safety chain loops go, it's going to be a plate style welded to the bottom of the crosstube and the receiver tube here. more
6/27/2017 3:28:13 PM
Trailer Hitch Installation - 2013 Acura MDX - Draw-Tite- Video
Today, on our 2013 Acura MDX, we're going to be taking a look at and showing you how to install the Draw-Tite Custom Fit Class III Trailer Hitch receiver, part number 75614. Here's what our hitch looks like fully installed. We are going to see a portion of the cross tube, and it's going to give us that two inch by two inch receiver tube opening. It does feature a reinforced collar around it, which is going to give it added strength and giving it a nice, clean, finished look. Now, we're going to have two sets of holes on our receiver tube. The furthest hole towards the front of our vehicle, that's going to be for our hitch pin. It's going to use a standard 5/8 in and clip. more
6/27/2017 3:28:00 PM
Best 2013 Acura MDX Hitch Options- Video
Today on our 2013 Acura MDX we'll be looking at our best hitch options. We have two hitches here today. On the top we have a CURT class three, part number 13354. On the bottom we have a Draw-Tite class three, part number 75614. The main difference between our two hitches here today is that our Draw-Tite here has this extra tab welded onto it where you can mount your electrical connections for your trailer wiring such as your four-pole flat or your seven-way RV connection. Our Draw-Tite hitch here has an additional hole that's in front of the standard 5/8 diameter hitch pinhole. more
8/19/2016 1:25:12 PM
